Sign in to follow this  
rsrandazzo

[24MAY16] PMDG DC-6 Cloudmaster for X-Plane Update and Release Info!

Recommended Posts

Captains!

Tonight we have an update for the vintage airplane fans and X-Plane users looking forward to the upcoming PMDG DC-6 Cloudmaster for X-Plane.

One of the things that is interesting about simming is the diverse range of interests from which simmers draw on the hobby.  Some simmers are far more interested in visual detail that allows them to engage in an immersive story of the journey.  Others are more interested in sitting down with original manuals and working the knobs, switches and levers to recreate perfectly the steps taken by aircraft flying in the real world.

One of the challenges that PMDG sought to undertake when we launched our first product line in August 1997 was to bridge the gap between these two poles in the simming community- and to that extent I think our products have largely succeeded.  With this update tonight, I want to show you an example of how this is especially true with the PMDG DC-6 Cloudmaster!

Picking up on some of the themes from our earlier update, we have created a really nice and easy-to-use Fuel And Loadout Manager for the DC-6.  The fuel loading method will give you complete flexibility to set your total fuel load, or set the fuel load on a per-tank basis to satisfy your dispatch requirements.  Alternatively you can click the 100% and 50% buttons, and the results will be self explanatory.  

a2_18MAY16.jpg


For payload loading, we will use this cargo DC-6 as a good example...  Along the lower right corner of the page you can see your current fuel and weight loading with the respective impact on the aircraft's gross weight.  Setting cargo in the Lower or Main holds will reflect in your weight on the manifest.

We didn't stop there, however- as we all know that cargo is not invisible...  So as you load weight onto the airplane, its presence becomes visible in both the upper and lower deck cargo areas.  You can see in this image below the presence of paletized freight strapped to the floor and ready for hauling to the outter reaches best served by the good old Cargo Haulin' DC-6!

a9_18MAY16.jpg


So now let us step onto the flight deck and talk a bit about nit-picky-detail stuff.

The DC-6 has a TON of circuit breakers.  (These are the old, 1950s switch throw circuit breakers that actually have some weight to them- so I MAY not be exaggerating when I tell you that there are a TON of them on this airplane!)  

You have heard me say a few hundred times in this forum that the modern interpretation of circuit breakers is that pilots should leave them alone.  If a breaker pops, it is an indication of trouble.  Report it to maintenance and don't go resetting them in flight.  It failed for a reason...

b1_18MAY16.jpg

On the DC-6, things are a bit different.  This airplane comes from an era where the pilots were often trained mechanics and they were expected to be able to address any circumstance that came up in the field without having to call home for permission.  (Insert argument on accident statistics and safety here...  LOL)

To that end, we are giving you quite a bit to play with...  All of the breakers (except maybe two or three) are operable.  You can throw them, and turn equipment on and off to see what kind of impact it has on your ability to fly and operate the airplane.  All of it works...  Or not...  Depending upon how you set that breaker...

b2_18MAY16.jpg

There will be a quiz later, we expect you to know what every single breaker does, where it is located (by feel, in the dark) and how many amps you save by throwing it to the OFF position...  You have a week, get studying!   :Shocked:

Seriously- we like to provide this incredible level of depth and detail, but we also want to make the simulation visually immersive and enjoyable- so we have implemented some balancing controls to allow you to set things up to suit your style of simming.

In this image, you can see a realism options menu that allows you to configure on or off the kinds of detail level you want to experience.  Most of the options here are pretty easy to understand- and all of them can be further understood if you take the time to dig into the manual and read what sort of pilot skills you will need to employ if you turn various functions on.  One of the more interesting features is that we implemented a "head shake" to replace the seat of the pants sensation you would get in certain instances, such as leaving your cowl flaps set too far open in high speed flight.  If you do this in the real airplane, you get a very ominous, low frequency rumble and vibration through the airframe that serves to ensure every member of the crew knows just how stupid you really are...  So we implemented this with an optional head shake to simulate the vibration.

c1_18MAY16.jpg

Whether you admit your lack of airmanship to your crew is up to you.  

(Side note: Flying the DC-3 last summer, we managed to get one set of cowl flaps in the OPEN position rather than TRAIL on takeoff...  The vibration was bad enough that the engine gauges were hard to read, and we were pretty certain the right engine was misfiring.  Precautionary landing followed... and the offending copilot was beaten ruthlessly with the fuel dipstick...  True story.)  :ph34r:

Of course- if you elect not to admit your mistake, and maintenance decides to launch a full inspection of the airplane- they will have all of the required maintenance stands and equipment to accomplish the mission!

d2_18MAY16.jpg

Any of you who have flown our 747 (the old one OR the new one!) will know that fuel system complexity is something we have always taken great pride in.  The DC-6 has an incredibly complex system that has been modeled in great detail.  Main and alternate fuel systems with crossfeed, fuel dump, and accurate display of fuel pressure on the cockpit gauges.  You won't be bored in cruise flight as you manage this plumbing marvel in order to ensure you have access to all of the fuel you need for those long over-water segments, that is for sure!

e1_18MAY16.jpg

Okay- as the last part of my update this evening, I promised Henning we would squeeze in a few shots of the airplane and the flight deck "in action" at night.  The external lighting has been modeled to give you much of the feeling that you get flying the actual airplane.  These airplanes were designed in the 50s, after all- and plain old incandescent bulbs tended to be poor on the illumination side while drawing a massive amount of energy.  The result is that the wing inspection lights, while operable, aren't always as helpful as one would like- and you can see that in evidence in this image here.  Look at the outboard left engine and you can see it- but not in great detail because of the shadows and dim light.

Pretty neat stuff when you see it in the sim!

While I'm here- notice the exhaust stack flames on #3 and #4?  You have to see those in the sim to really appreciate the work that went into animating them!

f9_18MAY16.jpg


Last might image for the evening is the business end.  We have shown you a few images similar to this in order to demonstrate the wonderful, red glow of the cockpit lighting and how realistically it creates a sense of space and darkness.  If you love old airplanes and revel in the characteristics that make them challenging to fly- then you will LOVE flying this magnificent prop-liner at night, in weather.  The ambiance and the feeling of being there is hard to beat.

f8_18MAY16.jpg

Okay- I think that gives you a pretty good sample of what we have in store with this incredibly deep, feature rich simulation of one of the classics of airliner history.  When you look around this flight deck, you aren't just seeing a bunch of knobs and buttons that don't DO anything...  They are all functional.  Everything works.  Needles respond to system changes, temperatures and pressures.  They respond to vibration in the airframe.  The airplane flies marvelously nicely until you abuse it...  Then it swings a cantankerous cudgel that will send you scrambling for the runway and the safety of proper procedures.

Sure, it may take a bit of time to master, but we promise you the satisfaction of a flight well flown will be worth it.

h1_18MAY16.jpg

The PMDG DC-6 Cloudmaster is an incredibly deep simulation of the adventuring days of modern airline travel when we were just learning how to safely transport passengers across vast expanses of territory in a manner that was designed to appear effortless.  Fly the PMDG DC-6 Cloudmaster, master the operation of her systems, and you will gain a much greater understanding of just how much effort can go in to making something look effortless, that really isn't.

She is a classic...  From the golden era...  hence I will close with an image of the Golden Gate, as seen through the front windows of a golden age classic.  

 

h2_18MAY16.jpg

 

Want to fly her?  

Release for X-Plane will take place on June 1, 2016... 

 

(For those interested in other platforms: We don't have any platform conversion ETAs available at this time...  We will let you know once we have spent some time on the conversion and thus have some estimates...)

 

See you in training class!

  • Upvote 18

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Ouch, I can see many hours spent challenging myself on this...bring it on!

Share this post


Link to post
Share on other sites

Fantastic news! I look forward to purchasing the first of many PMDG X-Plane products ;)

 

 

We didn't stop there, however- as we all know that cargo is not invisible...  So as you load weight onto the airplane, it's presence becomes visible in both the upper and lower deck cargo areas.  You can see in this image below the presence of paletized freight strapped to the floor and ready for hauling to the outter reaches best served by the good old Cargo Haulin' DC-6!

 

Love the cargo detail!

Share this post


Link to post
Share on other sites

Wow just wow, it's gonna be epic! some old school flying (would be easier with a copilot and a FE to help with some kind of shared cockpit^^).

I hope you port your 777 to XP someday and really wish you put the same level of details in the VC and on animations, and would love to hear that sound we can here when throttle are moved forward on the real 777 (we can hear this kind of rumbe in the IXEG) would be really great to take advantage of XP possibilities :)

cheers

Share this post


Link to post
Share on other sites

Yeah I will buy this too and with the $15 I won't spend on DTG FS It won't be so hard on my pocket book either. LOL!

 

EDIT: You PMDG Guys should also take a look at AeroFly FS2. I just bought it and My guts are telling me it is the 3rd path.

Share this post


Link to post
Share on other sites

Louis,

 

You really wish we would put detail into the 777?

 

Have you been any where within 200nm of that product?  Sometimes I read comments in this forum that are so truly ignorant and demanding that it leaves me shaking my head...


 

EDIT: You PMDG Guys should also take a look at AeroFly FS2. I just bought it and My guts are telling me it is the 3rd path.

 

Dave-

 

I've been hearing some back-channel rumbling about intellectual property issues that makes me a bit nervous when it comes to that one. 

Share this post


Link to post
Share on other sites

Very nice. Looks like I may have to give x-plane a try, at least until the new 747 releases for P3D

Share this post


Link to post
Share on other sites

Absolutely gorgeous!

WOW!

Thank You very much for this informative update here!

Share this post


Link to post
Share on other sites

I usually wait a couple of patches before buying a complex aircraft but I guess this will be an exception...

Share this post


Link to post
Share on other sites

 

 


I've been hearing some back-channel rumbling about intellectual property issues that makes me a bit nervous when it comes to that one.

 

OK, but didn't I hear some time back that Austin Meyer has the same problem with an intellectual property lawsuit relating to X-PLane?

Share this post


Link to post
Share on other sites

OK, but didn't I hear some time back that Austin Meyer has the same problem with an intellectual property lawsuit relating to X-PLane?

 

Due to Patent Trolling...completely different (skip to 1:35):

 

 

Yes, that's John Oliver mocking the ridiculous state of affairs of patent abuse, using the claim on X-Plane as the example.

 

 

 

Always check facts first.

  • Upvote 1

Share this post


Link to post
Share on other sites

Day 1 purchase for me.  I just recently purchased your 737 NGX for P3D and I love it, although I must admit I am a huge X-Plane fan, and hope to one day purchase all your aircraft for X-Plane.  Good stuff and thank you for the news.

Share this post


Link to post
Share on other sites

Any idea how multi-platform pricing will be handled with regards to XP10/FSX? I want it and it will likely be a day one purchase for me, but I want the DC-6 more for FSX. If this product follows PMDG pricing then I'm not sure I can justify buying it twice.

Share this post


Link to post
Share on other sites

DiD you forget to tell us the price??

 

Nope. We don't usually provide one until it releases.

 

As a general rule of thumb, if we don't provide something, it wasn't an accident.

  • Upvote 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this