September 2, 20196 yr 3 hours ago, Ray Proudfoot said: Check for duplicate AFDs for MYNN. Also check the layering order. The three Nassau entries should be at the top in scenery library as viewed in P3D. Ray, Thanks a bunch I followed your instructions and the problem has been solved. It looks really look I might add.Thanks again..
September 3, 20196 yr 22 hours ago, gregory.goodwin1 said: I'm about 2/3 of the way done with the Exumas Looking forward to that!! That's my favorite area of the Bahamas! Can't wait to see what you do with Staniel Cay... Russ Master Sergeant, U.S. Air Force, Retired Former T-33A Crew Chief Former B-1B Crew Chief / Flightline Maintenance Expediter Former Learjet Corp. Quality Inspector Formerly Young (😩)
September 3, 20196 yr Really appreciate this thread, since I just really enjoy flying around the Caribbean. (1) looking fwd to the new Bahamas scenery and (2) I am guessing that my previous concern about Nassau from AS being installed in to P3Dv4 is not causing you guys any problems. I was suspect of it b/c my sim was crashing frequently when I had it installed. But now I'm feeling brave based on your comments so I'm going to try it again tomorrow. cheers, rgds, JB 9800x3d, ASUS TUF x870, 64GB G.Skill DDR5, MSI Ventus 4080, HP Reverb G2 VR, FlyVirtual.net, Private Pilot SEL rating, subLogic FlightSim 1983 & every release since
September 3, 20196 yr 7 hours ago, duckbilled said: I'm also getting default building bleeding through. I scanned for duplicate files. All I found was a file in ...ORBX\FTX_OLC\FTX_VECTOR_FixedAPT\Scenery\ABP_MYNN. I removed it, but I still get default buildings. Edit: Solved - Remove the file "APT_MYNN" from the same directory. Glad you solved it. I did mention it in my previous post, though 😉 Happy flying! Benjamin van Soldt Windows 10 64bit - i5-8600k @ 4.7GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4/5 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case
September 4, 20196 yr On 8/31/2019 at 8:57 AM, w6kd said: There are no v4 native versions that I am aware of...I use the Aerosoft (IDS) version for P3Dv3, with some custom GSX2 enhancements. But beware, MYNN is one of those airports that has been tweaked in ORBX OpenLC NA, so if you use OpenLC you have to go in and remove any ORBX airport/elevation files. Regards @w6kd..Would you be willing to share you Aerosoft MYNN GSXv2 enhancement profile? I am not able to get mine to work. Troy Kemp Win 11 64 Pro on 1TB nvme + 500GB ssd / P3Dv5.3+ on 1TB nvme+ 250GB with P3D addons / MS2020 2TB nvme /I9 13900K@ 5.8ghz / 32GB DDR4 3600mhz / MSI MPG Z690 DDR4 with wifi / RTX 4090FE
September 4, 20196 yr 37 minutes ago, troyboy66 said: @w6kd..Would you be willing to share you Aerosoft MYNN GSXv2 enhancement profile? I am not able to get mine to work. It's more complex than that, unfortunately. You probably can't get it to work because you also have to edit the IDS_MYNN.xml file in the SODE xml subfolder to remove the IDS SODE "Stand" definition(s) for any jetways you replace with GSX. The GSX exclude function only works with IK jetways defined in a scenery bgl...it will not exclude SODE jetways defined in an xml installed into SODE by the scenery installer, as is the case with this one. In addition to the GSX .ini file, my mod also requires edited versions of several copyrighted files that I can't distribute...the original airport file from Aerosoft/IDS where I corrected the parking locations to coincide with the pavement markings (MYNN_ADEX_IDS.bgl), the IDS SODE placement file (IDS_MYNN.xml) and removal of several Orbx files (ABP_MYNN.bgl and APT_MYNN.bgl) which I do via a batch file, as it has to be reaccomplished after any use of FTX Central, which unhappily replaces those files rather than allowing them to remain disabled with ".off" or similar. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
September 4, 20196 yr On 9/2/2019 at 12:20 PM, Bobsk8 said: This area is being devastated by a hurricane today. Just thought I would mention that. https://www.nytimes.com/2019/09/02/world/americas/hurricane-dorian-bahamas.html Actually, Nassau didn't get hit, it was Abaco Island and Freeport (Grand Bahama Island) in the NW Bahamas that got clobbered. A post-Dorian edit of MYGF would probably entail going into ADE and removing everything but the pavement. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
September 4, 20196 yr On 8/31/2019 at 11:19 AM, scottb613 said: Hi Bob, Thanks - I have no first hand experience with them... Also noticed Bernardo has a new site up and the pictures look incredible... https://www.photosimlabs.com Regards, Scott Is that scenery ever going to be released? I'm going to give the freeware a test flight. MSFS
September 4, 20196 yr 1 hour ago, w6kd said: It's more complex than that, unfortunately. You probably can't get it to work because you also have to edit the IDS_MYNN.xml file in the SODE xml subfolder to remove the IDS SODE "Stand" definition(s) for any jetways you replace with GSX. The GSX exclude function only works with IK jetways defined in a scenery bgl...it will not exclude SODE jetways defined in an xml installed into SODE by the scenery installer, as is the case with this one. In addition to the GSX .ini file, my mod also requires edited versions of several copyrighted files that I can't distribute...the original airport file from Aerosoft/IDS where I corrected the parking locations to coincide with the pavement markings (MYNN_ADEX_IDS.bgl), the IDS SODE placement file (IDS_MYNN.xml) and removal of several Orbx files (ABP_MYNN.bgl and APT_MYNN.bgl) which I do via a batch file, as it has to be reaccomplished after any use of FTX Central, which unhappily replaces those files rather than allowing them to remain disabled with ".off" or similar. Regards WOW! Sounds complicated. Guess I'll stay clear of that for now.😲 Thank you. Troy Kemp Win 11 64 Pro on 1TB nvme + 500GB ssd / P3Dv5.3+ on 1TB nvme+ 250GB with P3D addons / MS2020 2TB nvme /I9 13900K@ 5.8ghz / 32GB DDR4 3600mhz / MSI MPG Z690 DDR4 with wifi / RTX 4090FE
September 4, 20196 yr Did a quick flight and I have some bleeding textures at MYGF. Overall it's a nice freeware: AS MYNN MSFS
September 29, 20196 yr On 8/31/2019 at 11:19 AM, scottb613 said: Hi Bob, Thanks - I have no first hand experience with them... Also noticed Bernardo has a new site up and the pictures look incredible... https://www.photosimlabs.com Regards, Scott Wow... What's the status on this? Looks as good as ORBX scenery!!! Chris Camp
September 30, 20196 yr 2 hours ago, Kilo60 said: Wow... What's the status on this? Looks as good as ORBX scenery!!! Don't hold your breath for this one Chris.... Bernardo has been having issues getting this out for some time, and there is no clear explanation as to why. Shame, because yes it looks great. Cheers, Murray Murray Dreyer
September 30, 20196 yr Hi Folks, @DJJose NICE DJ !!! Looks like you've got it dialed in - love the appropriately colored housing - how's the frames with all that eye candy ? Can't wait to visit the swimming pigs... @Kilo60 Hi Chris - sorry - I don't have any "inside" information on this - it does look superb - and probably one of the most desirable locations for east coast GA pilots - it's practically a right of passage to visit the islands... I'm looking forward to it as well... Regards, Scott
September 30, 20196 yr 1 hour ago, scottb613 said: Hi Folks, @DJJose NICE DJ !!! Looks like you've got it dialed in - love the appropriately colored housing - how's the frames with all that eye candy ? Can't wait to visit the swimming pigs... Regards, Scott Hi Scott, If you mean the Nassau freeware package & payware airport, no issues with fps. I'm looking forward to photosimlabs sceneries. Maybe the dev should consider a wordpress site and sell the sceneries through paypal. Really not rocket science. MSFS
September 30, 20196 yr 55 minutes ago, DJJose said: Hi Scott, If you mean the Nassau freeware package & payware airport, no issues with fps. I'm looking forward to photosimlabs sceneries. Maybe the dev should consider a wordpress site and sell the sceneries through paypal. Really not rocket science. Hi DJ, Hah - my mistake - I thought you were beta testing Bernardo's work or something - no matter - fantastic shots there - sir... Regards, Scott
Archived
This topic is now archived and is closed to further replies.