Jump to content

Sign in to follow this  
B777ER

P3D 5.1 Released

Recommended Posts

2 minutes ago, remcosol said:

fyi i went back because v5.1 is a blurry/ stuttery mess . I wanted 5.1 to work so bad but to many issues so ill try again next update, thank you for your help

OK, sorry you are having so many problems with P3Dv5.1.

Al

Share this post


Link to post
3 hours ago, Flic1 said:

Pete - It is obvious when on the ground only and objects are drawn in front of the sky/clouds. You do not notice it once in the air but it is terribly noticeable while taxiing as nearly all objects will display this flickering behavior. I also never used EA in 5.0 due to a lot of the quirks and I don't think too many of them have really been fixed in this version....

Strange. I never saw any objects in front of any clouds. There's a nice realistic mist in the valley limiting visibility. I didn't see any objects which were supposed to be'behind' it!

I did have it maximised on a 4k screen.

Pete

 


Win10: 2004 19041.264
CPU: 9900KS at 5.5GHz
Memory: 32Gb at 3900 MHz.
GPU:  RTX 24Gb Titan
2 x 2160p projectors at 30Hz onto 200 FOV curved screen

Share this post


Link to post
4 hours ago, SierraDelta said:

Yep,, tastes like word not allowed but at least I'm eating in the FSL cockpit 😁 And no sense installing it as it sounds like v5.1hf1 will be out next week whereupon FSL will have to update all over again.

Edited by B777ER
  • Like 1

Eric 

 

 

Share this post


Link to post
3 hours ago, brosss said:

Damian from HiFi said: "The P3D 5.1 release version has an issue preventing proper EA mode weather control via SimConnect with ASP3D (or any other weather add-on). We have forwarded our findings to P3D developers and we hope that it will be resolved soon with a new P3D update.

We should have our ASP3D compatible update posted very quickly after the fix is available."

Well, full stop on the install.


Eric 

 

 

Share this post


Link to post
48 minutes ago, B777ER said:

Well, full stop on the install.

I believe I did say "wait" early in this thread ... not that anyone listens 😉

Cheers, Rob.

  • Like 8
  • Upvote 4

Share this post


Link to post
4 hours ago, B777ER said:

Well, full stop on the install.

Don’t worry because its not true that no any other weather works with v5.1 just try P3DWX that is free, comes with historic weather, metar interpolation, sim weather, and current weather. Also Rex Sky Force works like a charm with EA too and FGRW has been updated. I unboxed the v5.1 and where live streaming along 7 hours with EA at ultra, PMDG, QW787, MJC8Q400, and Milviz KA350i with amazing clouds, 4k textures and 4xssa, terrain shadows, building and vegetation shadows, and speed trees on. The white artifact and the PBR metal are just about setting dynamic reflection on under certain conditions. I have found that Dynamics Reflections needs a P3D restart to work. By the way DR was the cause off rain in the cabin in P3D v5, if you deactivate in HF2 you get the rain and fog in cockpit fixed, and the blueish PBR metal too. 
And about no rain particles, as I saw in some posts, are not true too. 😉

i do not pretend you all watch my 7 hour live streaming, but take a fast look if one of you guys want to taste the true facts. V5.1 works like a charm compared to previous version, and HDR autoexposure and night lighting crisp are supperb. 

V4 started with issues and has been one of the best P3d versions (4.5) IMHO 

cheers

 

Edited by Gumerson
Typo errors
  • Like 1

Share this post


Link to post

Well, I reluctantly reinstalled the previous client. There were some things, that I couldn't overcome- much of which is a result of having a graphics card that can only be pushed so far. I'll have to read the list of fixes again, but has anyone else had problems with the PMDG 737 auto pilot in 5.1? On final to LIMC, the APP button disengaged and the aircraft just started to fly in a circle. Once I was able to re establish the lock, it did the same thing. I'll try it again tomorrow and see if it even had anything to do with the update. No problem.

Share this post


Link to post
6 hours ago, B777ER said:

And no sense installing it as it sounds like v5.1hf1 will be out next week whereupon FSL will have to update all over again.

Indeed, that's really disappointing. I'll also stick with 5.0 HF2 for now.


Cheers, Søren Dissing

CPU: Intel i9-10900KF @5.1Ghz HT off | Cooler: ASUS ROG Ryujin 360 | GPU: ASUS Strix RTX3090 OC | MoBo: ASUS Maximus XII Hero | RAM: 64Gb DDR4 @3600 | SSDs: 1Tb Samsung M.2 970EVO Plus (Win10), 1Tb Samsung M.2 970EVO Plus (P3D), 1Tb Samsung 860EVO (MSFS) | Monitors: HP Reverb G2, 28" ASUS PB287Q 4K | Additional Hardware: Logitech Extreme 3D Pro | OS: Win 10 Pro 64 | Sim: MSFS & P3D v5.1 Professional | FTX Global, OpenLC EU and NA | Wx: ASP3D & EA | Chaseplane | BA Virtual

 

 

Share this post


Link to post
2 hours ago, Gumerson said:

Don’t worry because its not true that no any other weather works with v5.1 just try P3DWX that is free, comes with historic weather, metar interpolation, sim weather, and current weather. Also Rex Sky Force works like a charm with EA too and FGRW has been updated. I unboxed the v5.1 and where live streaming along 7 hours with EA at ultra, PMDG, QW787, MJC8Q400, and Milviz KA350i with amazing clouds, 4k textures and 4xssa, terrain shadows, building and vegetation shadows, and speed trees on. The white artifact and the PBR metal are just about setting dynamic reflection on under certain conditions. I have found that Dynamics Reflections needs a P3D restart to work. By the way DR was the cause off rain in the cabin in P3D v5, if you deactivate in HF2 you get the rain and fog in cockpit fixed, and the blueish PBR metal too. 
And about no rain particles, as I saw in some posts, are not true too. 😉

i do not pretend you all watch my 7 hour live streaming, but take a fast look if one of you guys want to taste the true facts. V5.1 works like a charm compared to previous version, and HDR autoexposure and night lighting crisp are supperb. 

V4 started with issues and has been one of the best P3d versions (4.5) IMHO 

cheers

 

Very good vid 👍

  • Like 1

Gerard

7940x ( 14 cores ) : 14 cores @ 4.7 - Gigabyte X299 Gaming 7 - 32 Gb G.Skill Trident Z 3200Mhz Cl 14 - Inno3D RTX3090 X4 iCHILL 24 Gb - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 43” Sony 4K tv's in NVSurround

8700K : all 6 cores @ 5.0 GHz - Asus ROG 370 - 16 Gb 4000 MHz @ 3600 Mhz - Inno3D RTX 3090 X3 iCHILL 24 Gb  - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - 1x 55” Sony 4K tv

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Attention!

The latest available version of EZdok camera - EZCA 3.1.0.38 results in CTD when used with P3D v5.1.

Today we are performing internal tests of a new build compatible with P3D5.1.

The Release will most likely be tomorrow.

  • Like 3

Nick Bebyakin
EZdok Software    http://www.ezdok-camera.com/

Share this post


Link to post

I haven't had much time, and have not installed yet. if I understand right a hotfix coming next week? So better wait?


i9 9900K 3.60GHz ..... RTX 2080 Ti ..... 48 GB Ram.

Share this post


Link to post
21 minutes ago, igorbischi said:

EA is not anymore on beta, It  went back to alpha.

Mmm...

EA%20dawn%201.jpg

  • Like 11
  • Upvote 1

Gerard

7940x ( 14 cores ) : 14 cores @ 4.7 - Gigabyte X299 Gaming 7 - 32 Gb G.Skill Trident Z 3200Mhz Cl 14 - Inno3D RTX3090 X4 iCHILL 24 Gb - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 43” Sony 4K tv's in NVSurround

8700K : all 6 cores @ 5.0 GHz - Asus ROG 370 - 16 Gb 4000 MHz @ 3600 Mhz - Inno3D RTX 3090 X3 iCHILL 24 Gb  - 1x SSD M2 1800/1800 2TB - 2x  Sata 600 SSD 500 Mb - 1x 55” Sony 4K tv

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post
1 hour ago, Nickbe said:

Attention!

The latest available version of EZdok camera - EZCA 3.1.0.38 results in CTD when used with P3D v5.1.

Today we are performing internal tests of a new build compatible with P3D5.1.

The Release will most likely be tomorrow.

sweet. Can't use my P3D without your product. 

best of luck with testing!


EASA PPL(A) / SEPL
i9 9900K  | ASUS ROG Strix RTX 2080 Ti OC | 32 GB Corsair DDR4 RAM |
EVGA Supernova G2 850W
 | PFC Saab Yoke w. Warthog throttle | 32" Philips 4K Monitor

 

Share this post


Link to post

Will de-install 5.1 tomorrow after sleeping a night over it and revert back to 5.0 HF2 because latest after 15min there is a "silent" CTD caused by ucrtbase.dll. This has also been reported by others.

Besides - I am not too much impressed by the performance so far (clouds still flickering, no improvement on graphic RAM, no Active Sky yet because of a P3D bug, etc)

 


Jürgen Martens

Share this post


Link to post
Guest
This topic is now closed to further replies.
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    45%
    $11,465.00 of $25,000.00 Donate Now
×
×
  • Create New...