June 15, 20223 yr On 5/29/2022 at 4:48 AM, rondon9898 said: Even with massive s-curves and sensitivity reductions, it’s still poor. I think study-level sim developers should be finding ways to circumvent the terrible ground physics. I’m hoping they find ways of doing this because landings still feel like Compo rolling down the hill in the bath in Last of the Summer Wine. It's a well established issue with MSFS. Playing with sensitivity can't really cure it. Definitely something that needs to be fixed by Asobo as well as other glaring issues with the physics engine. In the last Q & A the Asobo team has pledged to cater to more than the eye-candy crowd so there's hope that at some point this will be improved.
June 15, 20223 yr On 5/25/2022 at 6:30 AM, Nyxx said: Blackbox711 IRL A320 pilot Settings Do we know what his rudder pedals are set to, or does anyone want to post what their settings are that work well? I have this issue as well. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
June 15, 20223 yr 3 minutes ago, Zimmerbz said: Do we know what his rudder pedals are set to, or does anyone want to post what their settings are that work well? I have this issue as well. Will depend on your rudders. With by TPR I use 20% David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
June 15, 20223 yr 3 minutes ago, Zimmerbz said: Do we know what his rudder pedals are set to, or does anyone want to post what their settings are that work well? I have this issue as well. Will depend on your rudders. With by TPR I use 20% David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
June 15, 20223 yr Just now, Nyxx said: Will depend on your rudders. With by TPR I use 20% On all axis' ? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
June 15, 20223 yr The Fenix is he easiest aircraft to control when either taking off or landing, if your controls are set up correctly. If your swerving or any other weird things, your controls are screwed up, not the aircraft or MSFS.
June 15, 20223 yr 4 hours ago, Zimmerbz said: On all axis' ? As you asked Rudder axis. Brakes are a different matter altogether. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
June 15, 20223 yr Pilot seat shift levers do not work. Is there some sort of blockage? The instrument panel is too close for me. If I move the camera back, then the back of the seat interferes with me. Edited June 15, 20223 yr by Flying-Hare
June 16, 20223 yr 13 hours ago, Flying-Hare said: Pilot seat shift levers do not work. Is there some sort of blockage? The instrument panel is too close for me. If I move the camera back, then the back of the seat interferes with me. The seats can't be moved. If you can't move the viewpoint backwards, you can zoom out and save that as your new default view (CTRL+F10, at least that's my keybind for saving a new default VC view). For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
June 16, 20223 yr 20 hours ago, Nyxx said: Will depend on your rudders. With by TPR I use 20% Hey David, Do you have any other setting on the rudder pedals other than a - 20% sensitivity curve? I have Virpil Ace pedals and I just cannot seem to dial them in. They are not too bad on GA planes but with the Fenix I find that even with an S-Curve in place the rudder input on the take off roll seems very sensitive. Richard i7-12700K | Noctua NH-D15S Black Version | MSI Pro Z690 - A | 32 GB DDR4 3600 | Gigabyte Gaming OC 4090 | 1TB WD Blue NMVe (MSFS 2020) | 500 GB WD Black Gen 4 NVMe | 4TB WD Black Conventional | Fractal Design Torrent Case | Seasonic 1000W Gold Plus PSU | Thrustmaster Boeing Yoke | Honeycomb Throttle | Airbus Side Stick | Virpil Rudder Pedals | Sony X90K 55 Inch TV |
June 16, 20223 yr Add 10% deadzones the planes great to handle. Running i5-9600K @ 4.8ghz - 32GB DDR4 3200mhz - GTX 3070.
June 16, 20223 yr On 5/25/2022 at 7:30 AM, Nyxx said: Blackbox711 IRL A320 pilot Settings I can't see the picture. Is it up and it's my browser? Eric
June 16, 20223 yr there seems to be something wrong with the aircraft air ground contact points, see the "Fenix veers to the right" thread, on ground the rudder is not controlling the direction as expected, aircraft feels like swimming at higher speeds. Fenix responded in that thread and hopefully there is a solution soon. I've tried several rudder pedal sensitivity adjustments, no help at all, using CH Pro Pedals. To hold the runway heading at the moment for me only works to land the plane with the lowest speed allowed, but that is not as it should I think. Best regards Ralf Edited June 16, 20223 yr by cseu wrong spelling Ralf Andreas
June 16, 20223 yr 8 hours ago, RJC68 said: Hey David, Do you have any other setting on the rudder pedals other than a - 20% sensitivity curve? I have Virpil Ace pedals and I just cannot seem to dial them in. They are not too bad on GA planes but with the Fenix I find that even with an S-Curve in place the rudder input on the take off roll seems very sensitive. I suggest you just keep adding more curve, I had it upto 70% with a warbird, it’s not what it looks like it’s how it feels to use. 6 hours ago, B777ER said: I can't see the picture. Is it up and it's my browser? Eric, it’s your browser David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
June 16, 20223 yr Author Folks, it’s no good saying something to the effect of “it’s your controls, not MSFS”, as some tend to say in these forums and others, because it just ain’t true. The ground physics, along with things like the turbulence physics, are way, way off in MSFS at the moment and I’m seeing it in all sorts of videos and streams as well as my own simming. Never had problems of this nature in the sim before and I’ve been simming a heck of a long time now. My hope is that payware creators can overcome it somehow, but FENIX have yet to do so. Edited June 16, 20223 yr by rondon9898 A
Archived
This topic is now archived and is closed to further replies.