September 8, 20223 yr 25 minutes ago, Ray Proudfoot said: Mark, my only flight today was into Munich and I parked at a gate with a jetway. So no opportunity to check how a marshaller would behave. OK thanks for the update Ray and prompt reply. Cheers. SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU5 & P3D v5.3 HF2
September 8, 20223 yr Installed update today. FB KSFO jetways worked. Did see garbled text when taxing to gate. Dave Wadsworth i9 13900K 5.5Ghz 64G DDR6000 nVidia 4090 Win 11 22H2 Pro P3DV5.4 ASP/ASCA Pilot2ATC FS2Crew/TIR5/CP
September 9, 20223 yr 13 hours ago, DWadsworth said: Installed update today. FB KSFO jetways worked. Did see garbled text when taxing to gate. OK thanks for the update. Was hoping the garbled text was resolved but its not a deal breaker for now.I have yet to reinstall my FB and FSDT airports since moving to a new sim rig, so hopefully those .ini file issues are behind us. SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU5 & P3D v5.3 HF2
September 13, 20223 yr Where is Umberto? In topics like this he usually shows up immediately to claim that it is not FSDT but something else causing the issues. Edited September 13, 20223 yr by Nemo - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 13, 20223 yr Moderator 1 hour ago, Nemo said: Where is Umberto? In topics like this he usually shows up immediately to claim that it is not FSDT but something else causing the issues. This is not the official support forum. He visits here on occasion out of courtesy. Use the support forum if you still have an issue. I have no issues after updating last week. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
September 28, 20223 yr So, yesterday I was prompted for another GSX update. Is the update worth for P3D v5? I don't have the MSFS version, and I skipped the last one. Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
September 28, 20223 yr Although its in the MSFS Forum at FSDT (which is probably a better place to ask the question) ... it appears the details of whats included in the P3D update are also outlined http://www.fsdreamteam.com/forum/index.php/topic,26826.0.html Kael Oswald 9950X3D/ 64GB DDR5 6200 @ CL30 / Custom Water Loop / RTX 5090 / 3 x 48" LG C4 OLEDs
September 29, 20223 yr 8 hours ago, Luis Hernandez said: So, yesterday I was prompted for another GSX update. Is the update worth for P3D v5? I don't have the MSFS version, and I skipped the last one. Couatl™ Live update release notes September 28th, 2022 GSX Pro Fix: Parking spot Suffixes not shown on non-Gate positions. FSDT CYVR Vancouver: Many parking spots updated. FSDT CYVR Vancouver: Official GSX Profile, with VGDS at all stands, many WALK-IN Gates and custom Terminal group. GSX (FSX/P3D) Fix: Error during pushback. GSX (FSX/P3D) Fix: Optimizations to speed up the model cache creation.
September 29, 20223 yr Thanks a lot. I checked the release notes, looks like all the issues that appeared during last update were finally solved. Or at least this says so: http://www.fsdreamteam.com/forum/index.php/topic,26998.msg182710.html#msg182710 Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
September 29, 20223 yr 9 minutes ago, Luis Hernandez said: Thanks a lot. I checked the release notes, looks like all the issues that appeared during last update were finally solved. Or at least this says so: http://www.fsdreamteam.com/forum/index.php/topic,26998.msg182710.html#msg182710 I upgraded yesterday and the pushback sequence is now working properly and I didn't have any issues. Not tried the arrival yet but will report if any problems when I land.
October 2, 20223 yr On 9/29/2022 at 6:44 PM, okupton said: Is gsx back to working normal in P3d? Still scared to update it If you back up your Addon Manager folder, you can then try updating, and if it fails, restore the previously backed-up folder to revert back to the known working version. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 3, 20223 yr Done it. It works as normal, except for the fact my ramp voices somewhat changed, and that the messages in the green bar are also spoken. Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
October 3, 20223 yr 24 minutes ago, Luis Hernandez said: the messages in the green bar are also spoken Yeah, what's up with that? I haven't found a way to switch that off... Best regards, Dimitrios 9950X3D - 64 GB - RX 7900 XTX - TrackIR - Power-LC M39 WQHD - Honeycomb Alpha yoke, Saitek pedals & throttles in a crummy home-cockpit - MSFS for props, P3D for jets
October 3, 20223 yr Commercial Member There is a feature request to turn those voices off. Umberto has indicated that it will get completed at some point. Cheers Luke Kolin I make simFDR, the most advanced flight data recorder for FSX, Prepar3D and X-Plane.
Archived
This topic is now archived and is closed to further replies.