November 29, 20241 yr Hi Everybody, Anyone have any luck with Nvidia Experience filters and MS2020? All I get when I try and bring up the menu via (Atl+F3) is a flashing screen, makes it impossible to setup any filters. If you have it working can you tell me what drivers you're using? Thanks Edited November 29, 20241 yr by Mike_CFII_MEL Former Beta Tester - (for a few companies) - As well as provide Regional Voice Set Recordings Two: AMD-9950X | One: AMD-7950X3D | Three: Asus TUF 4090s | Three: 64GB DDR5 RAM 6000mhz | Three: Cosair 1300 P/S | Three: 990Pro 2TB NVME One: Eugenius ECS2512 - 2.5 GHz Switch | Three: Ice Giant Elite CPU Coolers | Three: 75" 4K UHDTVs | One: Boeing 737NG Flight Deck
November 30, 20241 yr I use them always and have for years, and use the latest NV drivers and have no issues. I find the Details filter to be perfect for my screen and settings, along w/ a bump up in contrast via NVCP to around 75, brightness down to 46, and gamma 93% w/ a bit of Dig Vibrance. I just hit Alt-3 to bring up the Filters menu and go from there. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
November 30, 20241 yr G'day Mike, I stopped using the nVidia filters because of the overhead hit I was getting by enabling GeForce Experience. I now use a preset in Reshade and found it to be good enough for me. Regarding the nVidia filters, if I remember correctly, you have to enable them in the Experience app and "link" MSFS as well. Sorry for not being more precise but my memory isn't the best any more. Hope I gave you a starting point. MSI Pro Z690-A DDR4 | i5 13600KF | G.Skill Ripjaws V 32GB 3600MHz | RTX 3080 (12GB) | Samsung 980 M.2 NVMe 500GB | Samsung 980 M.2 NVMe 1TB | Samsung 850EVO 500GB | Crucial P3+ 2TB NVMe | 2TB Seagate HDD | Deepcool AK500 CPU Cooler | Thrustmaster T16000M HOTAS | CH Yoke | Various Winctrl hardware | 21:9 1440p UW monitor | Win 11 23H2 build | MSFS2020 | Tony K.
November 30, 20241 yr 1 minute ago, petejohno1 said: It doesn't appear to support ms20204 as yet. They work. Just need the latest drivers. Cheers,John TavendaleTextures by Tavers - https://www.facebook.com/texturesbytavers
November 30, 20241 yr Well John, something is off here. I have the latest driver, 566.14, and in 2024 the only filters that will do anything are the RTX Dynamic Vibrance and RTX HDR filters. All of the other filters are not available for use. If I'm doing something wrong I wish I knew what it is, because I would sure like to have my filters back. Ken
November 30, 20241 yr 1 hour ago, John_Tavendale said: They work. Just need the latest drivers. Hmmmm.... I've got 566.14 and it says they are the latest drivers. Ms2024 isn't in the supported programs in the new GeForce app. Oh well, just another gremlin. Edited November 30, 20241 yr by petejohno1
November 30, 20241 yr 3 hours ago, speedyTC said: if I remember correctly, you have to enable them in the Experience app and "link" MSFS as well. Nah, they automatically enable themselves in GFE and when you launch MSFS, but that is 2020 I'm referring to as I haven't yet installed 2024. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
November 30, 20241 yr Strange. Are you running the newest nVidia app as well? [img][/img] Edited November 30, 20241 yr by John_Tavendale Cheers,John TavendaleTextures by Tavers - https://www.facebook.com/texturesbytavers
November 30, 20241 yr 6 hours ago, Mike_CFII_MEL said: Hi Everybody, Anyone have any luck with Nvidia Experience filters and MS2020? All I get when I try and bring up the menu via (Atl+F3) is a flashing screen, makes it impossible to setup any filters. If you have it working can you tell me what drivers you're using? Thanks Did you start MSFS2020 before ALT + F3? Best Regards, Vaughan Martell PP-ASEL KDTW
November 30, 20241 yr 51 minutes ago, John_Tavendale said: Strange. Are you running the newest nVidia app as well? [img][/img] Hi, They don't work for me. Neither Nvidia App nor GeForce Experience. I installed and uninstalled several times, with the latest Nvidia driver, but to no avail. MS2024 appears too bright, and I have to use the Nvidia Control Panel to mitigate, but that affect the whole Windows. Regards
November 30, 20241 yr 7 hours ago, Mike_CFII_MEL said: Hi Everybody, Anyone have any luck with Nvidia Experience filters and MS2020? All I get when I try and bring up the menu via (Atl+F3) is a flashing screen, makes it impossible to setup any filters. If you have it working can you tell me what drivers you're using? Thanks First start MSFS 2020 Load your flight Make sure you are in “fullscreen” mode Alt + F3 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 30, 20241 yr 9 minutes ago, John Fields said: Hi, They don't work for me. Neither Nvidia App nor GeForce Experience. I installed and uninstalled several times, with the latest Nvidia driver, but to no avail. MS2024 appears too bright, and I have to use the Nvidia Control Panel to mitigate, but that affect the whole Windows. Regards Exactly the same for me. I hope we'll find a solution soon ! - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
November 30, 20241 yr Might be worth a look for some of you https://forums.flightsimulator.com/t/until-nvidia-filters-work-again-a-temporary-solution-using-reshade/672513 Edited November 30, 20241 yr by Sethos [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
November 30, 20241 yr 4 hours ago, petejohno1 said: It doesn't appear to support ms20204 as yet. 2024 doesn't require filters anymore. Colours and lighting are far better than 2020. CPU Ryzen 7800X 3D RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090 Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440 Internal Storage 1TB NVMe PCIe SSD External Storage Three 4Tb HDs
Create an account or sign in to comment