l_jayma

The PMDG 777 & 737NGX..two of my favorite aircraft that have provided me a return on my investment way beyond the cost I paid for them.

I would recommend reading the following FAA(Federal Aviation Administration) publications to give you the insight your are looking for when comes to what real pilots do. Pilots Handbook of Aeronautical Knowledge Instrument Procedures Handbook These are two solid publications I refer to after many years of real flying from time to time. I don't know the (JAA)European version of the these documents, but I am sure someone here will respond with that answer. Happy Flying.

I changed it CTRL+F12 and the problem was resolved. Perhaps a corrupted file or CTRL+F12 is conflicting with something else. Worse Case..delete and re-install ASN

I was doing a little research and the forum post below had a similar issue with VATSIM interfering with VORs. http://forums.pilotedge.net/viewtopic.php?t=3931&p=25025

Are you sure you flipped the frequency to be active? I am sitting on the active runway - 33 at Perth. Dialed in 110.40 PTH and the CDI is centered on course 348. It makes sense since the VOR is NE of my position. The DME reads 0.0 nm

I was asked to change the shortcut from the default CTRL+F11 to something else..I have not had the chance to full test if this is the solution but sounds likely it is the answer.

Anyone have the issue with the ASN Weather Request popup window just open up without activating it from the addon menu? I did select it once but i closed the window, but it keeps appearing. I am running ASN 5921 P3dv3.2

Elaine, I followed your steps..resolved. Back in business..Thanks

In AppRoaming should I delete this entry as well? AppRoaming> dll.xml </Launch.Addon> <Launch.Addon> <Name>Addon Manager</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>bglmanx.dll</Path> </Launch.Addon> AppRoaming>exe.dll Use this to remove the references to coutl and fsdreamteam <?xml version="1.0" encoding="windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>exe.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>as_btstrp_config_manager</Name> <Disabled>False</Disabled> <Path>as_srv\as_btstrp_config_manager.exe</Path> </Launch.Addon> </SimBase.Document> ProgramData Folder > dll.xml - No change becuase there is no reference to bglmanx.dll </Launch.Addon> <Launch.Addon> <Name>Addon Manager</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>bglmanx.dll</Path> </Launch.Addon> ProgramDate>exe.dll No change - to confirm <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="AceXML" version="3,0" id="exe"> <Descr>AceXML Document</Descr> <Filename>exe.xml</Filename> <Launch.Addon> <Name>SODE</Name> <Path>C:\Program Files (x86)\12bPilot\SODE\SimObjectDisplayEngine.exe</Path> <CommandLine>P3Dv3</CommandLine> </Launch.Addon> </SimBase.Document>

Here are the entries in the exe.dll and dll.xml exe.xml <?xml version="1.0" encoding="windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>exe.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>Couatl</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>fsdreamteam\couatl\couatl.exe</Path> </Launch.Addon> <Launch.Addon> <Name>as_btstrp_config_manager</Name> <Disabled>False</Disabled> <Path>as_srv\as_btstrp_config_manager.exe</Path> </Launch.Addon> </SimBase.Document> dll.xml <Launch.Addon> <Name>Addon Manager</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>bglmanx.dll</Path> </Launch.Addon> Mark, Based on what I added in Poppet's question is this still the case to copy the dll.xml to the program folder? Additionally, my dll.xml file in the ProgramData folder is the following: <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="AceXML" version="3,0" id="dll"> <Descr>AceXML Document</Descr> <Filename>dll.xml</Filename> <Launch.Addon> <Name>SODE Animation Module</Name> <Path>C:\Program Files (x86)\12bPilot\SODE\SimObjectAnimationModule.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Flight Recorder</Name> <Path>Aerosoft\Flight Recorder\AS-FlightRecorder.dll</Path> </Launch.Addon> </SimBase.Document>

Any suggestions, I was looking around to see if anyone had this error but I could not find similar issues in my search. I installed P3d v3.2 and at startup when loading a scenaro, I am now getting a fatal error Faulting application path: D:\Prepar3Dv3\Prepar3D.exe Faulting module path: D:\Prepar3Dv3\bglmanx.dll I know it has to do with the fsdt/couatl applications but I dont own any of the sceneries or GSX. I did own have the QW757 but I deleted it from 3.1. Anyone else run into this issue? Also are there other developers who use this..I forget.(Flightbeam,etc..) I dont think so but I want to be sure. Thanks in advance.

At the very minimum update to 3.2 for the Client update. It will allow future updates to prevent reinstalling all your add-ons every update. The Shader and Content update should not be overlooked as well. Any improvements to content and/or shader functionality is welcome anytime just like any other application that has an update. Plus most add-on developers have updated to 3.2, so you should not have any issues with incompatibility.

The annunciator on the AP used to work on the other version now the light is replace with the tag. IN THE REAL PLANE...the light is the indicator(s) From the Garmin Perspective Manual "status and mode annunciations that are simultaneously displayed on both the Perspective™system AFCS Status Box and the S-TEC Fifty Five X Autopilot Display and/or Remote Annunciator Display, the Perspective™system displays an additional status annunciation of ‘AP’ when the autopilot is engaged. This provides the pilot with a dedicated annunciation showing the status of the autopilot engagement"

Issue Resolved...I checked back in and no issue. Thanks.

Anyone notice the login to the fullterrain forum is broken? I logged in and I had to reconfirm for signature but the popup for WelshPool keeps refreshing and not loading completely not allowing me to click the AGREE check box.

Do it..I still have FSX but I rarely use it any more ever since I moved over to P3D a few months ago.

Hope it worked out for you!

Currently there is a beta to get P3D to work with 2.5. Steps: 1. Purchase Active Sky Next. You need to have an active key to download the beta packages. 2. Once installed and run once, delete Active Sky Next and ASConnect(which is needed for ASN as well) Then download the beta here: http://www.hifitechinc.com/forums/showthread.php?4338-ASN-SP2-OPEN-BETA-For-FSX-FSX-SE-and-P3D Follow the same process of downloading and installing just as a non-beta package. You will be prompted for your key at the end of the install. I just purchased P3d 2.5 a week ago and downloaded the latest beta update and it works well as far as I have noticed.

The PMDG/ASN radar only captures PRECIPITATION as per the SP1d manual and the 777 PMDG Manual WX+T = Weather + T (Traffic)

--- Have you recalibrated the throttles? Make sure the correct profile is loading for that plane as well. Also, FSX had a bad habit to 'enabling' controllers and making you thing your fsuipc settings are incorrect. Check that and make sure you have the Enable Controllers check box 'unchecked' in the FSX>Settings>Controls. With the checkbox on, this will cause the FSX settings to override the FSUIPC settings.

Atlas Air livery looks great on the 777F.

In NGX tutorial #2 there is a really good exercise in using the offset function. It is very useful in this situation.

I am right there with you..ugh!

Delete. I am not sure but make list of your liveries just case.

The folder will be located in the Program Files(X86)\PMDG Operations Center.exe