April 3, 201016 yr Guys,EZCA 1.14 is now available here!:--) - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
April 3, 201016 yr Guys,EZCA 1.14 is now available here!:--)This is the big patch. I grabbed it last night, but due to other problems I didn't have time to try it out yet. There's a video he's posted there that goes over how to set up the new hat pan ... which gives us the wonderful outside 6-degrees of freedom camera in spot view. It's an amazing camera. Look for this thread called "for movie makers" i7-920 @ 3.2ghz | 6GB OCZ DDR3 @ 1600 mhz | GTX 580 1.5 GB | 1TB WD; 750GB WD | X-Fi Audio | 24" Dell LCD | X52 Flight Controller | REX-GEX-UTX-FTX
April 3, 201016 yr Commercial Member This is the big patch. I grabbed it last night, but due to other problems I didn't have time to try it out yet. There's a video he's posted there that goes over how to set up the new hat pan ... which gives us the wonderful outside 6-degrees of freedom camera in spot view. It's an amazing camera. Look for this thread called "for movie makers"Still tweaking cameras but so far very impressed!jja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
April 4, 201016 yr Still tweaking cameras but so far very impressed!jjaSame here. Got a chance to mess with it today, and I love the new spot camera. i7-920 @ 3.2ghz | 6GB OCZ DDR3 @ 1600 mhz | GTX 580 1.5 GB | 1TB WD; 750GB WD | X-Fi Audio | 24" Dell LCD | X52 Flight Controller | REX-GEX-UTX-FTX
April 4, 201016 yr Commercial Member I may have missed something but do I set a a world or aircraft camera to do a plane walk around?TIAjja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
April 4, 201016 yr this was too complicated for me, i uninstalled it and getting a refund from flight1,maybe in newer incarnations i will try again. I7-10700F RTX 3070 32 Gig Ram
April 4, 201016 yr I may have missed something but do I set a a world or aircraft camera to do a plane walk around?TIAjjaYou want an aircraft camera. I recommend downloading the spot.cam that is posted in their forum. Import that into your plane's aircraft camera column. You will LOVE it!Curt Curt Branch
April 4, 201016 yr I just installed EZdok and then immediately installed the update and got it running fine. Did a quick test flight and did notice the effects on the default flight (using the Cessna.) I have to admit that it really does add to the emmersion factor.But I've lost the joystick hat-button view controls. Is there a way of getting that back? I don't wish to view around the cabin via the mouse. I did inactivate it when installing EZdok and then reactivated but now when I try to use the hat, it starts to move the view just a bit but then automatically goes back to the center. Any help would be appreciated.Thanks! Alexander Alonso
April 4, 201016 yr Don't reactivate the hatswitch in FSX, leave it off/disabled as per the manual's instructions.
April 4, 201016 yr Don't reactivate the hatswitch in FSX, leave it off/disabled as per the manual's instructions.Thank you for your help. Unfortunately, when I tried that, the hat switch didn't work at all. I'll review the instructions once again. Thanks again! Alexander Alonso
April 4, 201016 yr Hmm. The only thing I can think of is to open the EZdok window while you're flying in FSX, and go to Options -> Define keys... and make sure the "enable joystick POV" box is checked, your joystick is selected, and disable is NOT checked.
April 4, 201016 yr Commercial Member You want an aircraft camera. I recommend downloading the spot.cam that is posted in their forum. Import that into your plane's aircraft camera column. You will LOVE it!CurtOK thanks curt. I couldn't get control+space to do a view (eyepoint) reset until I made a Pilot camera. Very cool app!jja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
April 4, 201016 yr Does anyone know how to disable the arrow keys in FSX, so I can use the Spot cam to move around? As it is, when using the arrow keys to control the spot cam, they (the arrow keys) control pitch trim and aileron movement at the same time. I can't find any listing for them in the FSX controls to disable them. i7-920 @ 3.2ghz | 6GB OCZ DDR3 @ 1600 mhz | GTX 580 1.5 GB | 1TB WD; 750GB WD | X-Fi Audio | 24" Dell LCD | X52 Flight Controller | REX-GEX-UTX-FTX
April 4, 201016 yr Commercial Member Does anyone know how to disable the arrow keys in FSX, so I can use the Spot cam to move around? As it is, when using the arrow keys to control the spot cam, they (the arrow keys) control pitch trim and aileron movement at the same time. I can't find any listing for them in the FSX controls to disable them.I removed most of the number options to do view changes and now the arrows seem to work normally. Do they work in edit mode (num 2)? They are programmed correctly in the EZDOC config out of the box.jja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
April 4, 201016 yr They are in the "control surfaces" section, but they will be listed as num4, num 6, etc. Just clear out all the control surfaces key commands if you use a joystick for them anyway. Does anyone know how to disable the arrow keys in FSX, so I can use the Spot cam to move around? As it is, when using the arrow keys to control the spot cam, they (the arrow keys) control pitch trim and aileron movement at the same time. I can't find any listing for them in the FSX controls to disable them.
Create an account or sign in to comment