October 27, 201411 yr Jabloom In response to your post re: screens blanking out .... Once I had set things up correctly within the MS Windows screen resolution panel everything settled down and worked correctly ... Cheers Paul Thanks, if I decide to reinstall 344.48, I'll check that.
October 29, 201411 yr Has anyone else experience menu's and stuff "distorting" while using DSR? I can't seem to figure out why my menu lines are bending and distorting when using this. I am not using NI just Nvidia Control panel and in-sim settings. Using p3d
October 29, 201411 yr Commercial Member I get the slight distortion on the taskbar but it doesn't look bad enough to toss out the baby with the bath water. Cheers jja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
October 29, 201411 yr Have you got windows Aero theme turned on? I noticed the distortion when I forgot to have it on. \Robert Hamlich/
October 30, 201411 yr Where is this setting located? The menus also "pulsate" when moving the mouse over them. My ORBX 3D lights also pulsate when in DSR is this normal?
October 30, 201411 yr Author Where is this setting located? The menus also "pulsate" when moving the mouse over them. My ORBX 3D lights also pulsate when in DSR is this normal? Orbx lights pulsate - yes thats normal - I am not using DSR but did notice that when I tried it - kind of weird Rich Sennett
October 30, 201411 yr So the routine is now once setup to check AA and AF INSIDE fsx display settings? I am having some Vsync tearing are we able to turn this on? Also is 4X AA the max we can do or can we go higher if we want, I have a GTX 780. Angelo Cosma PPL ASEL / IFR Federal Aviation Administration (FAA) Field Service Representative (SEA) ZSE ARTCC Intel i7 6700K 4.8Ghz / ASUS ROG Maximus Hero VIII / 16GB DDR4 3200Mhz Ram / EVGA 1080Ti FTW3/ Corsair H110i GTX EVGA 850 Watt Gold / Samsung 850 500gb SSD
October 30, 201411 yr Commercial Member I'm getting great results from 1.5xDSR, 2.0x is not much better on a 1920x1200. But what I do is set the best filtering and AA with NI, then apply 1.5xDSR. Steve Waite: Engineer at codelegend.com
October 30, 201411 yr Where is this setting located? The menus also "pulsate" when moving the mouse over them. My ORBX 3D lights also pulsate when in DSR is this normal? Nope...
October 30, 201411 yr Have you got windows Aero theme turned on? I noticed the distortion when I forgot to have it on. Geez. Thx Robert. Ive been highly critical of DSR all because I didn't have Aero enabled, had no idea I didn't. Makes all the difference in the world. Aero enabled is a MUST to use DSR. William
October 30, 201411 yr Orbx lights pulsate - yes thats normal - I am not using DSR but did notice that when I tried it - kind of weird From what I am reading here, Rich...I think that there is 'no norm' to anything we all collectively do as regards flight simming on a myriad of systems. I have no ORBX light pulsing at all, never had before DSR, and certainly not post-DSR. I'm going to just write it all down, to everybody's different hardware mix...and settings upon that hardware. There is NO commonality at all, and perhaps, has never been.... You try something..and if it strikes gold...you enjoy, but if not...you move on...and stick with what you have, that works for your expectations. For myself, and my equipment...DSR was like going around a bend in the road...and discovering new vistas that have come into view, as a result.
October 30, 201411 yr Author From what I am reading here, Rich...I think that there is 'no norm' to anything we all collectively do as regards flight simming on a myriad of systems. I have no ORBX light pulsing at all, never had before DSR, and certainly not post-DSR Thank Mitch for the mention - yes unfortunately one size does not fit all and with DSR your monitor is the biggest factor by far - lower resolution monitors are rocking with this plug-in - high resolution 2560 and up just do not need it - seems to be the general consensus - anyway what I do is use a program called snagit - its great for documenting your installs and directions to do so - I place the jpg screenshots in the folder of the addon which need extra tlc to load and there is not many now as EMT is great - I even loaded UT2 and EZCA with no tweaking anymore so last update must have fixed these problems - really the only thing I have run across in the last install was fsgenesis mesh One other thing I would like to pass on is the Aerosoft 318/319 - I have found it works great if loaded right after a new install of P3D - then other addons - in my case it worked as I was having a lot of problems with the auto flight system - now none and excellent FPS Rich Sennett
October 31, 201411 yr You're welcome fellas, the Aero theme kept me rom scrapping P3D altogether. I run a script that works beautifully when using applications that disable Aero, just search for Windows Aero Enabler and give it a try. I think I downloaded mine from softpedia. Geez. Thx Robert. Ive been highly critical of DSR all because I didn't have Aero enabled, had no idea I didn't. Makes all the difference in the world. Aero enabled is a MUST to use DSR. Enabling the aero setting solved my issued with the menus thanks. \Robert Hamlich/
October 31, 201411 yr Just curious why so many have aero turned off in the first place?? gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
Create an account or sign in to comment