September 21, 20223 yr This is ridiculous. What a fart. They call this an update? Rather a downgrade. I cannot get a flight loaded. My settings were unchanged! DX11. Loads 10 times longer now... And Graphics errors. EDIT: PMDG 737-800 was broken, even after MSFS restart. Hope a reboot helps. Edited September 21, 20223 yr by Piotr007 I9 12900K @ 5.1ghz P-cores/ 4.0 ghz E-cores fixed HT off / Corsair iCue H150i Capellix Cooler/ MSI Z690 CARBON WiFi / 32GB Corsair DDR5 RAM @ 5200 mhz XMP on / 12GB MSI 4090 RTX Ventus 3 / 7,5 total TB SSD (2+2+2+1+0,5 all NVMe)/ PSU 850W Corsair / 27" (1080P)
September 21, 20223 yr This is the peril of mandatory updates. I'm not a fan of them. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
September 21, 20223 yr 1 minute ago, micstatic said: This is the peril of mandatory updates. I'm not a fan of them. And the worst part of it, in my case for instance, you read that there are problems, and when I get home in about 2 hours, I am forced to install it knowing it is buggy.
September 21, 20223 yr No problems here. Was on Su10 beta, still there. Everything ok: PMDG etc. Guenter Steiner -------------------------------------------------------------------------------------- Betatester for: A2A, LORBY, FSR-Pillow Tester --------------------------------------------------------------------------------------
September 21, 20223 yr Back to Stellaris, I guess... Sad, man. Richard Chafey i7-8700K @4.8GHz - 32Gb @3200 - ASUS ROG Maximus X Hero - EVGA RTX3090 - 3840x2160 Res - KBSim Gunfighter - Thrustmaster Warthog dual throttles - Crosswind V3 pedals MSFS 2020, DCS
September 21, 20223 yr Everything seems to be ok here as well with the maddog, on DX11. The scenery looks slightly more blurry, which is hopefully temporary due to everyone downloading the update.
September 21, 20223 yr think I must have been lucky, I was on the beta for SU10, so today after downloading the latest Studio driver clean install with DDU, I turned on HT back on in bios (9900K) turned on DX12 and I have gone from CPU to GPU bound (3080 12 Gb) and its smoother than before, the major setting mostly on high / ultra !! no idea, no errors no nothing ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 21, 20223 yr 44 minutes ago, Piotr007 said: This is ridiculous. What a fart. They call this an update? Rather a downgrade. I cannot get a flight loaded. My settings were unchanged! DX11. Loads 10 times longer now... And Graphics errors. EDIT: PMDG 737-800 was broken, even after MSFS restart. Hope a reboot helps. Did you load the PMDG 737-800 for the first time? The first time the PMDG 737 loads after a new Sim Update, it needs to compile. And the compilation may take a long time, like 30 minutes for some people (yeah, that means you are sitting on the loading screen for 30 minutes). After it compiles, the PMDG 737 will load faster the next time. And note that each version of the 737-800 requires a compile. So the passenger version will require a compile. The BBJ2 version will require a compile. Etc. Edited September 21, 20223 yr by abrams_tank i5-12400, RTX 3060 Ti, 32 GB RAM
September 21, 20223 yr 45 minutes ago, Piotr007 said: I cannot get a flight loaded. My settings were unchanged! DX11. Loads 10 times longer now... And Graphics errors. Two things to try. In Windows Disk Cleanup, select and delete the DirectX Shader Cache. And inside the sim, delete any existing rolling cache (if you have it set).
September 21, 20223 yr 2 minutes ago, DylanM said: Two things to try. In Windows Disk Cleanup, select and delete the DirectX Shader Cache. And inside the sim, delete any existing rolling cache (if you have it set). The reboot and 517.40 driver did the job. AI still mess though. FSTraffic from justflight is a no go I am afraid. Planes still making 360-ies and buggy AI mess not departing at the first airport I tried. EPKK Krakow. I9 12900K @ 5.1ghz P-cores/ 4.0 ghz E-cores fixed HT off / Corsair iCue H150i Capellix Cooler/ MSI Z690 CARBON WiFi / 32GB Corsair DDR5 RAM @ 5200 mhz XMP on / 12GB MSI 4090 RTX Ventus 3 / 7,5 total TB SSD (2+2+2+1+0,5 all NVMe)/ PSU 850W Corsair / 27" (1080P)
September 21, 20223 yr 1 hour ago, Bob Scott said: Doesn't MSFS + DX12 require the nVidia driver released today (517.40)? Is this the studio one? or is it a WHQL? | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
September 21, 20223 yr One of the MSFS forum mods suggested that if you are using the Google Map mod, that you remove the mod and you fix your host file (since the Google Map mod may change our host file): https://forums.flightsimulator.com/t/warning-your-graphics-device-has-encountered-a-problem-again/543820/2 This is a long shot to fix this bug though, if you have tried everything else and it didn't work, maybe try this suggestion from the mod. Edited September 21, 20223 yr by abrams_tank i5-12400, RTX 3060 Ti, 32 GB RAM
September 21, 20223 yr 2 minutes ago, ryanbatc said: Is this the studio one? or is it a WHQL? Studio one. Other is not out yet. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
September 21, 20223 yr 1 hour ago, RichieFly said: Also, VFR map isn't working: window appears but is never filled with anything. it's the beta testers' fault!! 1 hour ago, DAD said: RichieFly will have an empty VFR map so go fix it and guess what. We're the VFR map people and we did listen. This is a mod conflict issue and the solution was posted on the beta forums in multiple threads. Please remove any mods that affect the VFR map or apply updates to those mods if applicable (the big two are the G3000 mod, which has an update to remove its VFR map mods, and the PMS GTN750, which also has an update to remove its VFR map mods). Those VFR map mods will break the VFR map because they're still modding the old VFR map, which will result in a very broken situation. Edited September 21, 20223 yr by MattNischan
September 21, 20223 yr I hope you realize I was joking (thus the italics). I very much appreciate the beta testers efforts. Richard Chafey i7-8700K @4.8GHz - 32Gb @3200 - ASUS ROG Maximus X Hero - EVGA RTX3090 - 3840x2160 Res - KBSim Gunfighter - Thrustmaster Warthog dual throttles - Crosswind V3 pedals MSFS 2020, DCS
Archived
This topic is now archived and is closed to further replies.