Is it normal for your FMS to not show the selected runway after the approach is all programmed in? My Perf page I believe it is shows the runway info such as length and stuff, but scrolling through LEGS gives me nothing in it. Thanks.

 

 

Sent from my iPhone using Tapatalk

They are regular customers at Schiphol Amsterdam, Cityjet and Lufthansa also I think. Nice planes to de-ice due to negative dihedral, so different procedures than "normal" planes. Like this pic, i'm the supervisor in front in the jeep.

Another successful flight with the RJ70!

 

2 more quick paints

 

 

 

available at http://aussiex.org/f...ndex.php?/index and here soon

 

Beautiful repaints! I have 2 Aussie repaint requests, Cobham Aviation VH-NJZ and Australia Air Express VH-NJM, both cargo companies

Do any New Zealand carriers use the RJ or 146 models?

 

 

Sent from my iPhone using Tapatalk

Ansett New Zealand used to fly them. They were 146s, but I don't remember which off the top of my head.

Gear U/D

 

Theres a Cobham paint at OzX and a VH- TNT as well

 

I will be doing a AAE paint whey they release the QT

 

the Kiwis had several companies that used the 146 > http://www.smiliner.com/operators/zk.shtml

Good news. As a Orbx owner I fly over there also a lot and will look forward to hopefully some nice paints for this awesome plane.

 

Enroute on VatSim from KYSM to KJAX. First night flight in Her. She is just great. Overhead panel text a lesser quality at night than the rest. Anyone else notice this with night lighting or is it my system?

 

 

Sent from my iPhone using Tapatalk

Is it normal for your FMS to not show the selected runway after the approach is all programmed in? My Perf page I believe it is shows the runway info such as length and stuff, but scrolling through LEGS gives me nothing in it. Thanks.

 

 

Sent from my iPhone using Tapatalk

 

Yes thats normal for this FMC.

 

It's also worth pointing out, that QW included a blank cfg file. You can add up to 100 different entries to this cfg, to add many functions...

 

GENERAL OPTIONS

Enable/Disable Type Options

DisplayLdgChkLst=1 Displays landing checklist on lower EADI, when landing checklist is activated on QW control panel.

Irs=1 Aligns IRS's on aircraft load. Default is 0

LdgChecklist=1 Activates Landing Checklist feature on aircraft load. Default is 0

LiteMode=1 Load Aircraft in Lite Mode config. Default is 0

LoadPanelStateonAcLoad=0 Disables the automatic loading of the LastSavedPanelState.pnl file (or defined PanelState= file). ‘1’ enables automatic loading and is default.

Packs=1 Turn packs on, on aircraft load

SetSpdOffwhenAPMasterSetOff=1 Turns off speed hold automatically whenever the autopilot is disengaged.

SavePanelStateOnScLoad= Saves the panel whenever the flight gets saved (on by default)

LoadFuelOnAircraftLoad= Disables automatic fuel loading on aircraft load(Fuel amount from QW Dispatcher)

LoadFuelOnFlightplanLoad= Disables automatic fuel loading on flightplan load (Fuel amount from Flightplan)

ShowPushBackTruck= Disables modeled Pushback Truck (on by default)

ActLnavWoIntHdg= Enables LNAV to be activated without being on intercept heading

FmsAlwaysOn= FMS always on, even if no power available

WeightUnit=LBS Sets units to LBS. Default is KGS

Variable User Customizable Options

IrsAlignSecs=17 Length of time in seconds to align the IRS's (default is 17)

PanelState=xxx.pnl Panel state file to use every aircraft load (This file is not used if the situation matches the LastSavedPanelState.pnl file).

simver=9 Set simulator version (should only be used if aircraft is not correctly finding sim version by default)

TcasVertRange= Default TCAS vertical range (in hundreds of ft) Default is 3000 (or 3000 ft)

AutoLandAPDiscSpd= Speed where Autopilot gets disconnected after Autoland (85 by default

 

 

 

FMS OPTIONS

Enable/Disable Type Options

1xAtTod=1 Automatically changes to 1x sim rate on reaching TOD

PauseAtTod=1 Automatically pauses the sim on reaching TOD

Variable User Customizable Options

FmcDispDragReqMsg=0 Disables 'DRAG Required' FMC message in VNAV mode

TransAlt= Preset Transition altitude

ClbAltRest= Preset Climb Altitude restriction (displays under Spd Rest label on FMS CLB page)

ClbSpdRest= Preset Climb Speed restriction (displays under Spd Rest label on FMS CLB page)

ClimbIas= Preset Climb Indicated Airspeed (displays under Sel Speed on FMS CLB page)

ClimbMach= Preset Climb Mach speed (displays under Sel Speed on FMS CLB page)

CruiseIas= Preset Cruise Indicated Airspeed (displays under Sel Speed on FMS CRZ page)

CruiseMach= Preset Cruise Mach speed (displays under Sel Speed on FMS CRZ page)

DescAltRest= Preset Descent Altitude restriction (displays under Spd Rest label on FMS DES page)

DescSpdRest= Preset Descent Speed restriction (displays under Spd Rest label on FMS DES page)

DescentIas= Preset Descent Indicated Airspeed (displays under Sel Speed on FMS DES page)

DescentMach= Preset Descent Mach speed (displays under Sel Speed on FMS DES page)

 

GAUGE OPTIONS

Enable/Disable Type Options

ShowExtDestCtrlineRwyId=1 Displays runway identifier at the end of the extended runway centerline display in Map mode (EHSI)

DisplayExtRwy=1 Displays extended runway centerline

FlightDirectorType= 1 = Single Cue, 0 = Dual Cue

Variable User Customizable Options

DisplayFont= Sets font used in FMS

EADISkyColor=R,G,B Sets color of the EADI ADI sky portion (insert RGB numbers, Ex.: =100,151,249)

EADIGndColor=R,G,B Sets color of the EADI ADI Ground portion

EadiRefreshRate= Sets EADI refresh rate (per second), min is 1, max and default is 18.

EhsiRefreshRate= Sets EHSI refresh rate (per second), min is 1, max and default is 18.

FmsRefreshRate= Sets FMS refresh rate (per second), min is 1, max and default is 18.

PedRefreshRate= Sets Primary Engine Display refresh rate (per second), min is 1, max and default is 18.

 

SOUND OPTIONS

Enable/Disable Type Options

*Zero disables these sounds+

AltCallApprMins=0 Disables 'Approaching Minimums' altitude callout

AltCallMins=0 Disables 'Minimums' altitude callout

AltCall10=0 Disables '10' altitude callout

AltCall20=0 Disables '20' altitude callout

AltCall30=0 Disables '30' altitude callout

AltCall40=0 Disables '40' altitude callout

AltCall50=0 Disables '50' altitude callout

AltCall100=0 Disables '100' altitude callout

AltCall200=0 Disables '200' altitude callout

AltCall300=0 Disables '300' altitude callout

AltCall400=0 Disables '400' altitude callout

AltCall500=0 Disables '500' altitude callout

AltCall1000=0 Disables '1000' altitude callout

AltCall2500=0 Disables '2500' altitude callout

PlayCockpitSounds=0 Disables all the non sound.cfg cockpit sounds

PlayEventSounds=0 Disables event sounds (button clicks etc)

PlayGpwsSounds=0 Disables GPWS sounds

PlaySpoilersSounds=0 Disables the spoiler sound

PlayCoolingSounds=0 Disables the Equip Cooling sound

PlayPacksSounds=0 Disables the packs running sound

PlayGearDragSounds=0 Disables the Gear Drag sound

PlayAnnouncements=0 Disables QWPAS Announcements

PlayWarningSounds=0 Disables the Cockpit warning chimes

PlayTakeoffCalloutSounds=0 Disables the takeoff callout sounds (V1, Rotate, V2 etc)

 

Variable User Customizable Options

VolumeCoolingFan=100 Sets cooling fan sound volume (min 1, Max 100) default 100

VolumeCrewCallouts=100 Sets Crew callouts sound volume

VolumeWarnings=100 Sets Warnings sounds volume

VolumePacksOn=100 Sets Packs running sound volume

VolumeSpoilers=90 Sets Spoilers sound volume

VolumeEvents=10 Sets Events sounds volume

VolumeGpws=100 Sets the volume of the GPWS sounds

 

 

Love this plane....

 

On my second flight now and really enjoying it as well. Big step up from their 757.

Just finished my 2nd flight, this time on Vatsim LFMN - LSGG, Couldn't get the ILS to work, but other than that it went perfectly. Thankfully it was VMC.

Also finished my 2nd flight. Love it so far. Works perfectly for me. Great frames, great detail

I spent most of yesterday on the flightdeck of this beauty. I started out flying in LITE panel mode, but ended the day flying in STANDARD mode. I am occasionally missing the co-pilot calling out the V speeds on the takeoff roll. I can't figure out why sometimes they play and sometimes they don't.

 

I have been flying between Glasgow and Dublin and Glasgow and Manchester. Autoland works great, but I only did it a couple of times to see it work. I really enjoy hand-flying this plane.

 

QualityWings, you have created something remarkable here. One can see the love and pride you put into this baby, and you should be VERY proud.