November 10, 20169 yr This is interesting. How about AS2016? Do I need to roll it back as well? Thanks, Dirk. No. All the add-ons are downward compatible. With every point release of P3D I waited until all add-ons were updated to work in the newest release before actually updating P3D itself. And everything still worked fine before I did the P3D update. So Orbx Objectflow, GTN750, AS16, etc. all worked in the older versions as well. [email protected] ∣ Asus ROG Strix B650E-E ∣ 64Gb@6000MT ∣ NVidia 5090 FE
November 10, 20169 yr Hi, Well I upgraded as I was effected by these two fixes, which has sorted out my setup. Stopped resetting audio devices during a hardware change. Caching previous state when recreating audio devices Correcting issue with Raw Input and Windows 10 keeping unplugged controllers in the device enumeration As others are saying, shame about not addressing the still ever present VAS issues. Gatwick Flight Simulation Group http://www.gfsg.co.uk - Affinity Mask Calculator http://www.gfsg.co.uk/affinitymask.aspx?SubMenuItem=hardware
November 10, 20169 yr Just installed hotfix and ran P3D as you suggested. Apparently the ObjectFlow was not automatically updated in that I got the ObjectFlow not compatible message. I also check on ORBX for an indication that the ObjectFlow had been updated and didn't see any indications of an update as yet. So, your's updated??? Danny Try again. I just checked the ORBX forums and it's definitely been updated.
November 10, 20169 yr Try again. I just checked the ORBX forums and it's definitely been updated. Yes, correct, mine was updated last evening. Bo b
November 11, 20169 yr With ASCA and AS16 now updated to SP1, I installed the P3d hotfix (1870). Everything looks and acts the same as the previous version of P3d. Super Traffic Board seems to work okay even though it wasn't updated. The same is true for Prepar3d Tweak Assistant. PTA 1.62 seems to work okay with the hotfix plus the new AS16/ASCA revisions. TacPack has still not been updated and I miss the Milviz UH-1 Huey. A few more days on that, probably.
November 11, 20169 yr With ASCA and AS16 now updated to SP1, I installed the P3d hotfix (1870). Everything looks and acts the same as the previous version of P3d. Super Traffic Board seems to work okay even though it wasn't updated. The same is true for Prepar3d Tweak Assistant. PTA 1.62 seems to work okay with the hotfix plus the new AS16/ASCA revisions. TacPack has still not been updated and I miss the Milviz UH-1 Huey. A few more days on that, probably. Any news regarding VAS improvements? Cheers, Ed Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
November 12, 20169 yr There is nothing wrong with vas. I have done a couple of long flights in pmdg 777 And complete flights with vs to spare With quite a few addons. Cheers Mike
November 12, 20169 yr Today I updated too.I see / sense no difference ... 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
November 12, 20169 yr Today I updated too.I see / sense no difference ... same here :-( Tried to go back to 3.35 but the crazy thing woith 3.4 ist that it really !!!! doubles !!!! my frames in heavy load areas (Aerosoft EDDF 2.0) In 3.35 wit the Aerosoft Bus i get 15 in average. With 3.4 30 fps.... So for me 3.4 is top notch in terms of frames and i will keep it. even if i have to restart it in order to complete a flight. Cheers, Carsten Carsten U
November 12, 20169 yr same here :-( Tried to go back to 3.35 but the crazy thing woith 3.4 ist that it really !!!! doubles !!!! my frames in heavy load areas (Aerosoft EDDF 2.0) In 3.35 wit the Aerosoft Bus i get 15 in average. With 3.4 30 fps.... So for me 3.4 is top notch in terms of frames and i will keep it. even if i have to restart it in order to complete a flight. Cheers, Carsten Are you saying the first version of 3.4 or you updated to this latest 3.4 version ? Rich Sennett
November 12, 20169 yr Are you saying the first version of 3.4 or you updated to this latest 3.4 version ? Rich, bro for me both versions of 3.4 give the same result in terms of fps Carsten U
November 12, 20169 yr Rich, bro for me both versions of 3.4 give the same result in terms of fps Thanks my friend :wink: Rich Sennett
November 12, 20169 yr Updated, no difference. Ivan Majetic ROG CROSSHAIR X670E HERO; 7900X3D; NZXT KRAKEN ELITE 360, GIGABYTE RTX 4080; G.SKILL TridentZ NEO RGB DDR5 64 Gb, WD HDD 2TB, SAMSUNG 980PRO, SAMSUNG 970EVO Plus 2x, ALIENWARE 3423DWF
Archived
This topic is now archived and is closed to further replies.