gregmorin

Flight 1 GTN 750 & GTN 650 released!

Recommended Posts

Flight 1 has released the GTN 750 & GTN 650 for P3Dv41!

http://www.flight1.com/products.asp?product=gtncomplete

They have rolled it all into one product for FSX, FSX SE, P3Dv3 and P3Dv4. If you purchased any of the products before it looks like you can upgrade the complete version for $19.95. If you have purchased all four of the previous products, GTN 750 FSX, GTN 650 FSX, GTN 750 P3D and GTN 650 P3D, they are offering a FREE update via their ticket system.

Thank you Flight 1!

Greg

  • Upvote 7

Share this post


Link to post
Help AVSIM continue to serve you!
Please donate today!

Coming from Flight1, that's surprising. Good on them. 

Share this post


Link to post

I'd like to have seen free for those of us who've bought either the 750 or 650 in the two previous versions, but I'll settle for a shade under 20 bucks to get that 750 in V4.

I'd have put a fair bet on F1 being later than Orbx airports being launched, but I was wrong.

 

  • Upvote 1

Share this post


Link to post

As far as I understand, there's no way just to update my single GTN650 (or single 750) to a compatible Prepar3D v4 version ? I have to migrate to the "complete" (650+750) package for $19.95 ('cause bought before 30th may). Right ?

I don't have much use of the 750 and just want to make compatible my 650.

Share this post


Link to post

I was just wonder why no one is mentioning this big event....

Share this post


Link to post

What big event? That some can have it for free while others have to pay? Bleh.

Share this post


Link to post

Best news I've heard all day.

Thanks!

  • Upvote 1

Share this post


Link to post

I think it a big event.  Last major software upgrade I needed to cut completely loose from FSX.  Thanks FlightOne!

  • Upvote 1

Share this post


Link to post
14 minutes ago, Parping Couplet said:

I'd have put a fair bet on F1 being later than Orbx airports being launched, but I was wrong.

Same!! Kind of surprised orbx is  trailing.

  • Upvote 2

Share this post


Link to post
24 minutes ago, vbazillio said:

As far as I understand, there's no way just to update my single GTN650 (or single 750) to a compatible Prepar3D v4 version ? I have to migrate to the "complete" (650+750) package for $19.95 ('cause bought before 30th may). Right ?

I don't have much use of the 750 and just want to make compatible my 650.

You understand correctly - and getting a "free" GTN750 in the bargain is not such a bad deal, in my books :cool:

  • Upvote 2

Share this post


Link to post

Sigh, what about for those of us who purchased both the GTN 750 and GTN 650, does this mean we have to pay $40 to get the new upgraded P3D v4 version?

Share this post


Link to post
1 minute ago, captain420 said:

Sigh, what about for those of us who purchased both the GTN 750 and GTN 650, does this mean we have to pay $40 to get the new upgraded P3D v4 version?

Nope.  Just $19.95.

Share this post


Link to post

Brilliant news. Now I get a free 650 for $20. Delighted. Missed the 750 badly. 

  • Upvote 1

Share this post


Link to post

Very welcome information.

Now, I just have to recall which V4 aircraft support the F1 GTN...

Milviz?  ... what else? 

Share this post


Link to post

Okay got the update but does anyone know why the GTN's aren't showing up in my options when I run the Config Panel tool for Realair Lancair Legacy v2?

Share this post


Link to post
16 minutes ago, RichieFly said:

Very welcome information.

Now, I just have to recall which V4 aircraft support the F1 GTN...

Milviz?  ... what else? 

The Realair TDuke looks lovely with the GTN 750. I also updated the Seneca, PC12, c337, c310, and Aztec. It's a hell of a list of great planes.

Share this post


Link to post
4 minutes ago, captain420 said:

Okay got the update but does anyone know why the GTN's aren't showing up in my options when I run the Config Panel tool for Realair Lancair Legacy v2?

You will need the P3D v2 update. You need to install it into P3d v2/3 along with the old gtn 750, then use the config to set it up, then copy the files. It's how I had to do it for my TDuke.

Maybe Bert can help. He's a genius. :biggrin:

Share this post


Link to post
Just now, DJJose said:

You will need the P3D v2 update. You need to install it into P3d v2/3 along with the old gtn 750, then use the config to set it up, then copy the files. It's how I had to do it for my TDuke.

Maybe Bert can help. He's a genius. :biggrin:

I don't understand, could you please help me on how to do it?

Share this post


Link to post

Do you have the P3D version of the Lancair from Realair? It was sold as an upgrade or full installer.

Share this post


Link to post

I just purchased and downloaded the Complete version and all went well however I have one significant problem.

When I launch the program only aircraft that came with P3Dv4 or were installed incorrectly into P3Dv4 like the PMDG series show up in the list.

My A2A C172 for instance and T6 that were installed correctly into the P3Dv4 Add-ons folder outside of P3Dv4 don't show up for use. This also includes the Duke Turbine which I placed into the same Add-ons folder, btw all these aircraft work perfectly so I assume the GTN program doesn't see these aircraft that were added by the recommended LM approach?

Please advise on how to get the GTN 750 installed into those aircraft that were installed correctly and use the add-on.xml approach.

Thanks in advance
Joe

Share this post


Link to post
9 minutes ago, DJJose said:

Do you have the P3D version of the Lancair from Realair? It was sold as an upgrade or full installer.

Yes I do, I already installed that into P3D v4. But when I run the config panel tool it won't detect the GTN's. So I can't add them. Only Default and the GNS 500 shows.

Share this post


Link to post
14 minutes ago, joepoway said:

I just purchased and downloaded the Complete version and all went well however I have one significant problem.

When I launch the program only aircraft that came with P3Dv4 or were installed incorrectly into P3Dv4 like the PMDG series show up in the list.

My A2A C172 for instance and T6 that were installed correctly into the P3Dv4 Add-ons folder outside of P3Dv4 don't show up for use. This also includes the Duke Turbine which I placed into the same Add-ons folder, btw all these aircraft work perfectly so I assume the GTN program doesn't see these aircraft that were added by the recommended LM approach?

Please advise on how to get the GTN 750 installed into those aircraft that were installed correctly and use the add-on.xml approach.

Thanks in advance
Joe

Joe - you need to go into Start > A2A Simulations > Accu Sim Comanche 250 P3D and run the P3D config tool.  Click GPS > Flight 1 then select either 650 or 750 and bingo.

Edit: Sorry I see you have the 172 not comance but same advice applies, just run the 172 config P3D tool.

Share this post


Link to post
Just now, captain420 said:

Yes I do, I already installed that into P3D v4. But when I run the config panel tool it won't detect the GTN's. So I can't add them. Only Default and the GNS 500 shows.

You have to install the p3d version of the RA Lancair into the old p3d v2/3 simulator along with your 32bit gtn 750. Then run the config. After that then you can copy the modified Lancair.

Share this post


Link to post
Guest
This topic is now closed to further replies.