May 1, 20206 yr 5 minutes ago, simbol said: Right, make a backup of your Prepar3d.cfg.. then delete it.. and re-start P3D.. try with the default settings first.. then ramp up slowly and see what happens to the FPS.. this will help to determine the cause. S. Ok, Simbol. I will ramp up from a fresh .cfg and monitor the fps changes that go with settings changes. Karl i9-9900K@5,0 | 32GB 3200 | 2080TI | 4K 55" | MSFS | P3D V5
May 1, 20206 yr Is it possible to enable Dynamic Texture Streaming mid-flight or does it require a restart? I7-10700 (4.8 GHz with HT enabled) 2x16GB DDR4 3600MHz Gigabyte RTX 2070 Super OC Gaming
May 1, 20206 yr 1 hour ago, suchw said: Wow im pretty annoyed about this, we should all be, and thats what im talking about, for the people with high end systems with plenty of vram left are having to cop the new performance limit to ensure lower spec pc wont crash, wow I think you understand incorrectly. Disable texture streaming, which is a new feature, and you should be back pre-hotfix...
May 1, 20206 yr Commercial Member 1 minute ago, Branimir said: Is it possible to enable Dynamic Texture Streaming mid-flight or does it require a restart? You can enable or disable at any stage of the flight.. S. Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
May 1, 20206 yr I just uninstalled the whole V5 and reinstalled the whole new V5. Everything seems to be working. Though I did get a device hung in LVFR KMIA. never had one until today. but it seems to be just MIA and FLL running with high VRAM. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
May 1, 20206 yr Just now, simbol said: You can enable or disable at any stage of the flight.. S. Thank you! I have RTX 2070 Super that has only 8GB od VRAM so this will come handy if I notice a lot of VRAM usage mid-flight. I7-10700 (4.8 GHz with HT enabled) 2x16GB DDR4 3600MHz Gigabyte RTX 2070 Super OC Gaming
May 1, 20206 yr Just now, micstatic said: I just uninstalled the whole V5 and reinstalled the whole new V5. Everything seems to be working. Though I did get a device hung in LVFR KMIA. never had one until today. but it seems to be just MIA and FLL running with high VRAM. Those 2 plus LEMD also from LatinVFR are just VRAM eaters!! LM can´t do anything about it, all the textures in those 3 airports are 4k...only way is to limit the texture resolution to 1024... Ramon De Valencia AMD 9950X3D / 64GB DDR5 6000MHz / RTX 5090 / 1200 watt PSU MSFS 2020 and 2024
May 1, 20206 yr Commercial Member 1 minute ago, Branimir said: Thank you! I have RTX 2070 Super that has only 8GB od VRAM so this will come handy if I notice a lot of VRAM usage mid-flight. I would suggest you enable it during approach.. 😉 Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
May 1, 20206 yr 3 minutes ago, Vlooi said: I think you understand incorrectly. Disable texture streaming, which is a new feature, and you should be back pre-hotfix... Thanks you, you are correct my apologies Wayne such Asus Hero Z690, Gigabyte Aorus Master 5080, I914900K, Kraken 360 AIO CPU Cooled, 96 GIGS Corsair DDR5, 32 Inch 4K by 3
May 1, 20206 yr 43 minutes ago, Michael Moe said: Its not a full screen mode - never has , Michael Moe Yeah but you still fail to explain why. Anyway rather investigate this myself. CASE: Fractal Terra Silver CPU: AMD R5 7800X3D 5.0Ghz RAM: 32GB DDR5 6000 GPU: nVidia RTX 4070 Ti SUPER · SSDs: Samsung 990 PRO 2TB M.2 PCIe · PNY XLR8 CS3040 2TB M.2 PCIe · VIDEO: LG-32GK650F QHD 32" 144Hz FREE/G-SYNC · MISC: Thrustmaster TCA Airbus Joystick + Throttle Quadrant · MSFS2024 · Windows 11
May 1, 20206 yr 3 hours ago, Nuno Pinto said: But it works flawlessly. It's not supported officially, but if you know what you're doing... When we get PMDG the real fun will no doubt start. Intel® Core™ i9-13900KF - 24 Cores... Watercooling NZXT Kraken 240 RGB Black...MSI MAG Z790 TOMAHAWK...Kingston Fury Beast RGB 128GB DDR5-5600...NVIDIA RTX 4090 24GB.
May 1, 20206 yr 3 minutes ago, Nuno Pinto said: Yeah but you still fail to explain why. Anyway rather investigate this myself. https://www.prepar3d.com/forum/viewtopic.php?t=128921 Michael Moe Michael Moe
May 1, 20206 yr 2 hours ago, fennelda said: If I delete the "<AddOn.Description />" line in the add-on.xml files, P3D loads! You save us!! Thanks
May 1, 20206 yr 6 hours ago, Lorby_SI said: Because this is my devel computer. I need a defined baseline. Current state: After another uninstall, delete an reinstall, the sim started. Adding any external (add-on.xml) scenery to it, renders it non-functional again. It pretends to rebuild the scenery index, but then the splash screen disappears again - and no sim. The sim won't even ask for all packages to be activated, it just stops after the first scenery package. Other packages (aircraft etc) seem to work. Best regards I used to have to delete the scenerystatus.bin (C:\ProgramData\Lockheed Martin\Prepar3D v(x)) file before initiating V3 usually due to some addons, then it rebuilt the scenery file according to addon intentions. Might work here too, but i had to do that almost every time so made a shortcut to that folder on my desktop Edited May 1, 20206 yr by peppy197
May 1, 20206 yr I've done a clean install of the hotfix, but my external addons (eg Orbx libraries) are not recognised and don't appear in scenery.cfg. I note that when I finished installing it first the Roaming profile exe.xml and dll.xml were missing and I had to copy them from the other location. Any ideas? Edited May 1, 20206 yr by Malcolm Street
Archived
This topic is now archived and is closed to further replies.