April 15, 20215 yr According to Asobo, "On rare occasions during a flight, the position of axes will reset to 50% after exiting the Pause Menu". The problem is that the "rare" occasions means ALWAYS in my set-up. Upon hitting resume: flaps/throttle/spoilers/mixture/prop pitch revert to 50%, on the ground or in the air. Their "workaround" is a pure insult to human intelligence: "Head to Options > Controls then click the Sensitivity button above the Search & Filters panel to display the device sensitivity options and adjust the position of your device’s axes". In other words they have no clue.🥳 - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
April 15, 20215 yr Hmf, and I've been wondering why my engine keeps throttling back! Dave Kalin Excel Classes Computer Lessons
April 15, 20215 yr This was reported after the 1.14 upgrade as well, but for me it is more consistent now. // 5800X3D // RTX 3090 // 64GB RAM // HP REVERB G2 //
April 15, 20215 yr Yup! I am having this issue as well (never had it before). Richard 7950x3d | 32Gb 6000mHz RAM | 8Tb NVme | RTX 4090 | MSFS | P3D | XP12
April 15, 20215 yr 1 hour ago, David Roch said: According to Asobo, "On rare occasions during a flight, the position of axes will reset to 50% after exiting the Pause Menu". The problem is that the "rare" occasions means ALWAYS in my set-up. Upon hitting resume: flaps/throttle/spoilers/mixture/prop pitch revert to 50%, on the ground or in the air. Here too with my new Milviz Corsair : prop and throttle slide back to 50%, mixture is cut <sigh> when I go the menus for binding a key. Never saw that before. Edited April 15, 20215 yr by Dominique_K Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
April 15, 20215 yr Same here, it will happen on nearly every flight where I ALT TAB to watch youtube or look at littlenav map since last WU, never happened before, what a joke, I truly hope they will release a hotfix soon.
April 15, 20215 yr Replying to Hangar's post Nothing will get done in regards to management of this title unless the press turns on them and i don't see that happening. The press simply croon over the visuals and scenery updates and if there was even a hint of an issue its glossed over (Obsidian Ant) comes to mind. Generalized gaming press don't know what to look for so they wont notice. I'm thinking you would need to have a cyberpunk sized screw up in order to get upper managements attention about how this project is being handled at the moment. So no, this will be a "very bumpy flight" for now. Edited April 15, 20215 yr by Maxis AMD Ryzen 9800X3D/ Asus ROG Strix B650E F Gaming WiFi / Asrock Taichi 9070XT / 32GB G.Skill Trident Z5 Neo DDR5 6000 / 2x ADATA XPG 8200 Pro NVME / Arctic Liquid Freezer II 280 / Seasonic Vertex 1000w PSU / Lian Li LanCool II Mesh Performance / Asus VG34VQL3A / Topping E70 Velvet DAC & L70 Amp /Sennheiser HD660s2 Thrustmaster Boeing Yoke + TCA Sidestick + TFRP Rudders
April 15, 20215 yr 11 minutes ago, Dominique_K said: Here too with my new Milviz Corsair : prop and throttle slide back to 50%, mixture is cut <sigh> when I go the menus for binding a key. Never saw that before. You can avoid it getting cut by mapping your mixture control to Mixture axis -100 - 100. I guess you have it mapped to 0-100 now. By doing this the mixture is not completely cut when you return to the sim. // 5800X3D // RTX 3090 // 64GB RAM // HP REVERB G2 //
April 15, 20215 yr Can confirm. Not too much of a problem on my setting though at least for the throttle, since I use a Warthog and while it positions it to 50% I can simply move the throttle a bit and it syncs again on the CJ4. Not checked for mixture and flaps though. Hotfix needed though.
April 15, 20215 yr Now it explains why my CRJ was falling out of skies yesterday after ESC! Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
April 15, 20215 yr 1 hour ago, David Roch said: According to Asobo, "On rare occasions during a flight, the position of axes will reset to 50% after exiting the Pause Menu". The problem is that the "rare" occasions means ALWAYS in my set-up. Upon hitting resume: flaps/throttle/spoilers/mixture/prop pitch revert to 50%, on the ground or in the air. Their "workaround" is a pure insult to human intelligence: "Head to Options > Controls then click the Sensitivity button above the Search & Filters panel to display the device sensitivity options and adjust the position of your device’s axes". In other words they have no clue.🥳 At every update a mess, I have to say. The saboteur is still inside Asobo's team and they are simply unable to find who is the guy (or the lady). Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
April 15, 20215 yr Its just a small bug. Hardly critical. Don't use pause until the next release. Remember the vast majority of simmers don't visit forums and I bet most are not concerned with this. The avsim "sack the developers and escalate to management" group are a storm in a teacup I am afraid.
April 15, 20215 yr For more than 30 years that I have been flying on flightsimulator, I have to count on the fingers of my hand the use of the pause button! Edited April 15, 20215 yr by eriktu
April 15, 20215 yr 6 minutes ago, eriktu said: For more than 30 years that I have been flying on flightsimulator, I have to count on the fingers of my hand the use of the pause button! Great, we are all delighted to learn that ! By the way, this is not about the pause button but the esc key to access the menu panels (including to bind keys and axis). Dominique Simming since 1981 - [email protected] GHz with 16 GB of RAM and a 1080 with 8 GB VRAM running a 27" @ 2560*1440 - Windows 10 - Warthog HOTAS - MFG pedals - MSFS Standard version with Steam
Archived
This topic is now archived and is closed to further replies.