3 hours ago, David Roch said:

And here is the latest version, Noel:
https://www.nexusmods.com/site/mods/738?tab=files

Awesome thank you David

How to uninstall previous versions please? 

It's as it was with the original version--zooming/panning causes severe ghosting of 2D windows.  That isn't quite a show stopper for me because I can keep the square area of 2D pretty small.  But, there is a slight flicker for lack of a better word when I pan left and say look at the ground during takeoff, that isn't there w/o this app.  Panning isn't materially better than what I already, so no use for it at this point.

DynamicLOD has been a nice help, especially by freeing up VRAM in scenarios where it approaches my 12Gb.

Cheers

Quite some time still until I will be able to test this mod, but I am wondering if it is at all useful if you have a 60hz monitor with no form of G/F-Sync capabilities? Anyone with a monitor like that who have tested this mod with success? Monitor will be upgraded, but for the time being it will be used for some time still.

1 hour ago, Bønny96 said:

Quite some time still until I will be able to test this mod, but I am wondering if it is at all useful if you have a 60hz monitor with no form of G/F-Sync capabilities? Anyone with a monitor like that who have tested this mod with success?

I do. My monitor is max 60hz, I set MSFS at 30fps (via NCP) and the Frame Generation mod with my 3080 makes it 60 fps.

PS: my only drawback is that my GPU's fans are too much noisy is this configuration.

Edited January 17, 20242 yr by vbazillio

1 hour ago, Bønny96 said:

Quite some time still until I will be able to test this mod, but I am wondering if it is at all useful if you have a 60hz monitor with no form of G/F-Sync capabilities? Anyone with a monitor like that who have tested this mod with success? Monitor will be upgraded, but for the time being it will be used for some time still.

It is useful regardless, because you can keep power and heat low by generating only 30 fps and getting 60.

Even my 7800X3D cannot always deliver 60 fps, so in many situations you would have 40-50 fps instead of 60 at the price (power and heat) of 30!

Thanks to both of you, sounds promising. Forgot to mention that the system will consist of the 7800X3D, 32GB DDR5-6000 and in the beginning a RTX2080Ti ROG Strix 11GB since the budget pretty much is reached with the other upgrades, but hopefully the RTX2080Ti, FG, 30FPS locked will do well enough. With vsync off in the sim and on i NVP will it then feel like 60 frames with vsync if I understand correctly? I am just hoping that the RTX2080Ti that I have will work well with FG since I get a feeling that it is somewhat hit and miss for those with the 2000 series and the mod is more suitable for the 3000 series cards.

 

50 minutes ago, Bønny96 said:

With vsync off in the sim and on i NVP will it then feel like 60 frames with vsync if I understand correctly?

Yes, the difference in smoothness is evident even with my 3090.

Enjoy!

Wait. One needs to lock the frames (at 30 for example) for this mod to do its thing? Sorry if this was answered many times, I'm a bit late to this party.

1 hour ago, vbazillio said:

I do. My monitor is max 60hz, I set MSFS at 30fps (via NCP) and the Frame Generation mod with my 3080 makes it 60 fps.

PS: my only drawback is that my GPU's fans are too much noisy is this configuration.

Weirdly if I set my frame rate limit within NCP then to 50 then within the sim it shows 25 fps using Shift Z mod. I appreciate this or developer mode shows the true frame rate but if I followed what you said and set my frame rate in NCP to 30 then would my sim not drop to 15 fps?

My final frame generated performance appears to equal what I lock it to in NCP not double it. It's certainly not running at the sims reported 25 fps

34 minutes ago, Tomaz Drnovsek said:

Wait. One needs to lock the frames (at 30 for example) for this mod to do its thing? Sorry if this was answered many times, I'm a bit late to this party.

Hello Tomaz, no need to lock the frame, actually.

2 hours ago, MrFuzzy said:

It is useful regardless, because you can keep power and heat low by generating only 30 fps and getting 60.

Even my 7800X3D cannot always deliver 60 fps, so in many situations you would have 40-50 fps instead of 60 at the price (power and heat) of 30!

Question, apologize if it was answered, my monitor is Gsync-compatible (not gsync) with refresh rate of 164hz. Now normally I set the max refresh rate in windows display setting because of mouse ghosting. What would be then the recommended settings in terms of refresh rate for MSFS? (The refresh rate on Windows settings, should stay max) 

2 hours ago, omarsmak30 said:

Question, apologize if it was answered, my monitor is Gsync-compatible (not gsync) with refresh rate of 164hz. Now normally I set the max refresh rate in windows display setting because of mouse ghosting. What would be then the recommended settings in terms of refresh rate for MSFS? (The refresh rate on Windows settings, should stay max) 

With a GSync compatible monitor you can use the default refresh rate. It should be able to run at 60 Hz once in MSFS with a 60 fps limiter.

If not, switch to 60 Hz before (or even after) starting the sim.

I must have been missed something. What does it mean by DLSSTweak version. Is it for those who turn the DLSS on?I  am using the universal version and keeping the DLSS on.

1 hour ago, MrFuzzy said:

With a GSync compatible monitor you can use the default refresh rate. It should be able to run at 60 Hz once in MSFS with a 60 fps limiter.

If not, switch to 60 Hz before (or even after) starting the sim.

Thanks for the answer. Default I presume the refresh rate of 60hz? And I think I should enable vsync in Nvidia settings?