November 21, 20205 yr I have MSFS Steam Edition and until FS2020 has third party A/C I thought about purchasing Prepare 3D version 5. I think we are six months to a year away from a more mature FS 2020 as far as third party development. To me the A/C is everything for realism. Although I enjoy the scenery enhancements in FS2020. Most of my Aircraft that I really like has an install for P3D. Thoughts? Thanks!
November 21, 20205 yr I could never go back to GA flying in FSX/P3D but I recognise there is a good use of FSX/P3D for airliner flying right now* * The FBW A320 would give FSX/P3D a run for the money though. The systems are not quite FlightSimLabs or Aerosoft yet but it's ok and the immersion factor makes up for it, for me.
November 21, 20205 yr Another one of these? Seriously? GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
November 21, 20205 yr 26 minutes ago, Skyseek said: I have MSFS Steam Edition and until FS2020 has third party A/C I thought about purchasing Prepare 3D version 5. I think we are six months to a year away from a more mature FS 2020 as far as third party development. To me the A/C is everything for realism. Although I enjoy the scenery enhancements in FS2020. Most of my Aircraft that I really like has an install for P3D. Thoughts? Thanks! You can use whatever you want ! I personally don't care. I can assure you won't be punished for that !LOL Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
November 21, 20205 yr 43 minutes ago, Skyseek said: I have MSFS Steam Edition and until FS2020 has third party A/C I thought about purchasing Prepare 3D version 5. I think we are six months to a year away from a more mature FS 2020 as far as third party development. To me the A/C is everything for realism. Although I enjoy the scenery enhancements in FS2020. Most of my Aircraft that I really like has an install for P3D. Thoughts? Thanks! Good for you! But the question is, why the need for the announcement? In need for some support from P3D fans? 😄 P/S: Currently I am flying on X-Plane with Zibo from EDDK to EVRA and yesterday I have flown on MSFS with FBW320 from EDDB to LIME and yet I didn't make any announcement 😂. Edited November 21, 20205 yr by omarsmak30 AMD Ryzen 7 7800X3D, 64GB DDR5 6000MHZ RAM, RX7900XT, FreeSync 165hz 1440p display
November 21, 20205 yr cya in six months ... have fun. AMD Ryzen 7 5800x3d, MSI X570 Pro, 32 gb DDR4 3600 ram, Gigabyte 6800 16gb GPU, 1x 2tb Samsung NvMe , 1x 2tb Sabrent NvME, 1x Crucial 4tb Nvme M2 Drive
November 21, 20205 yr 1 hour ago, Skyseek said: I havI thought about purchasing Prepare 3D version 5. Thoughts? Thanks! Waste of money.
November 21, 20205 yr Whatever makes you happy. If P3D is it for the next six months, go for it! 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
November 21, 20205 yr 1 hour ago, Skyseek said: I have MSFS Steam Edition and until FS2020 has third party A/C I thought about purchasing Prepare 3D version 5. I think we are six months to a year away from a more mature FS 2020 as far as third party development. To me the A/C is everything for realism. Although I enjoy the scenery enhancements in FS2020. Most of my Aircraft that I really like has an install for P3D. Thoughts? Thanks! for me its a no brainer. If the aircrafts has an installer for P3DV5 i would buy in a heartbeat. V5 is way better than v4. I wiill be flying P3DV5 for years Michael Moe Edited November 21, 20205 yr by Michael Moe Michael Moe
November 21, 20205 yr Sounds good to me, enjoy yourself. Now time to post over on P3D that I am announcing my hiatus from their sim for the next 6 months until *insert feature* gets up to date.
November 21, 20205 yr I'm never going back to P3D again, no matter how much I miss NGX and no matter how buggy still 2020 is, no way. Jacek G. Ryzen 5800X3D | Asus RTX4090 OC | 64gb DDR4 3600 | Asus ROG Strix X570E | HX1000w | Fractal Design Torrent RGB | AOC AGON 49' Curved QHD |
November 21, 20205 yr 2 hours ago, Skyseek said: I have MSFS Steam Edition and until FS2020 has third party A/C I thought about purchasing Prepare 3D version 5 Depends a lot on your video card.. FSX hardly uses it and P3D V5 puts a lot of load on the GPU. Bert
November 21, 20205 yr Commercial Member 1 hour ago, RaptyrOne said: Another one of these? Seriously? And not the last one! This is just another weekend DRAMA! 😆🤣😂 Edited November 21, 20205 yr by OSM
November 21, 20205 yr I'm going back to... the kitchen, as I need to wash my dinner plate and cutlery. Just thought I'd let you all know, since it's getting more and more like facebook around here. OS: Win11 Home; Mobo: Asus TUF Gaming Z690-Plus WiFi D4; CPU: Intel i5-12400 (Alder Lake) 4.4 GHzRAM: Corsair Vengeance DDR4 64Gb (4x16GB) 3600 MHz; GPU: MSI Radeon RX 5700XT [8GB] SSD: Corsair Force MP510 (for OS); 2x 1TB & 1x 2TB Sabrent Rocket Nvme PCIe 4.0 (one for sim, two for addons)HDD: Seagate 3TB (Data); Seagate 1TB (Programs), ASUS TUF Gaming VG32VQ1B Curved 31.5" monitor, 1440p, 38Mbs ethernet Fulcrum One Yoke, Honeycomb Bravo throttle, Thrustmaster Airbus TCA sidestick & throttle, Logitech Pro pedals, Xbox wireless gamepad (1st gen)
Archived
This topic is now archived and is closed to further replies.