Lets start compiling a list for Carenado:

1.  CDI bar on the HSI only moves right, but not left

2.  GSI on the HSI does not activate for GTN Xi LPV approaches

3.  Airspeed indicator reads low  (150 instead of 162)

4.  GNS 430 does not turn off when avionics power is switched off

5.  Up/Down buttons on AP not functional

6.  Airplane under powered on take-off

7.  Default loading set to max passengers + luggage (why?)

8.  Unreasonable performance impact of avionics gauges (goes away when avionics power switched off)

9.  Overly sensitive to cross winds when on the ground

10.  Take-off trim indication does not match required take-off trim setting

.. feel free to add to this list 😉

Edited September 4, 20223 yr by Bert Pieke

That’s quite a list Bert. I’m surprised to see so many issues that passed beta and weren’t fixed.

Elevator trim far outside normal values.

2 hours ago, cmpbellsjc said:

That’s quite a list Bert. I’m surprised to see so many issues that passed beta and weren’t fixed.

It certainly is however the aircraft is still very flyable and enjoyable especially if you're using third part peripherals to handle AP etc.

But yes, a few things for them to work on.

Jase

Also, there is a bug regarding night lighting.

The split rheostat that dims the lower Nav Display and upper primary flight display, only one portion of rheostat selector is currently working and therefore only the ND is dimmable, so at night you're stuck with a big bright PFD  

No bug bot something for the wish list.

A state saving for the plane defaulting to the PMS50 GT750 at loading instead of having to use the menu on the tablet each time at start up.

Great list Bert! I can only add one minor item:

11) When switching on the inertial separator the associated caution light does not turn on.   

3 hours ago, roland said:

A state saving for the plane defaulting to the PMS50 GT750 at loading instead of having to use the menu on the tablet each time at start up.

This might be interesting for you: https://forums.flightsimulator.com/t/carenado-pc-12/508388/356

Electrical system - constant drain and non-functioning Invertor

Alt/Vs guage is not giving accurate readings - Set to 5000 - actual flight at 5100 - simconnect monitor indicates altitude is set to 5100

Excessive Take Off distance (not sure if this power or lift related)

When using Tablet Start Options - Fuel is automatically set to 100% overriding any existing settings

The more I fly the more I find - do they actually have any beta testers ?

29 minutes ago, TonyD said:

The more I fly the more I find - do they actually have any beta testers ?

You really have to wonder about that. Some of these things appear to be so obvious,

Oh my, I'll wait a bit then

Despite it's shortcomings I really like flying this aircraft - good range, relatively fast and very stable on approach.  It will get better but probably not until SU10 has been finalized and released.

I am one of those lucky people that are no suffering any fps issues with this aircraft (SU10 beta).

Strobe lights and landing lights are not attached in the right position. "Floating light orbs" can easily be fixed in the systems.cfg...how did they not notice this?

1 hour ago, TonyD said:

The more I fly the more I find - do they actually have any beta testers ?

I've been buying Carenado addons for over 10 years now and I seriously doubt that they do any kind of beta testing. 

10 hours ago, roland said:

A state saving for the plane defaulting to the PMS50 GTN750 at loading instead of having to use the menu on the tablet each time at start up.

A fix for this was posted at the MS Flightsim forum (see above).. unfortunately no indication on how to default to the TDS GTNXi..

Edited September 4, 20223 yr by Bert Pieke

27 minutes ago, Tim-HH said:

I've been buying Carenado addons for over 10 years now and I seriously doubt that they do any kind of beta testing. 

Ditto.....  They own me!  SHINY!!!! (I'm on mobile so I can't post the crab from Moana lol)