Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

DLSS 4 Definitive guide.

Featured Replies

I tried it again and while MSFS 2020 would load to the Welcome screen it would essentially freeze up with choppy mouse pointer and no ability to click anything to get back to the Windows desktop so had to kill MSFS process via task manager.

Noel

System:  9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL  64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync.

Aircraft used in MSFS 2024:  Fenix A320,  Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.

 

  • Replies 453
  • Views 109.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • It's highly likely that the cause is related to changes you made in the past, which were saved in the Nvidia Profile Inspector. Alternatively, you may have downloaded an XML file at some point an

  • I'm not sure if DLSS swapper is going to be the saviour here. As these files are nowadays handled by the latest Nvidia driver. Well, that's the way I understand it - things are still very messy. The l

  • After wading through all this stuff....decided to take the dog for a walk instead... 

word not allowed, I'm back to blurry terrain after installing the latest driver and setting up DLSS 4.  Anyone else?

CPU Ryzen 7800X 3D  RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090
Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440
Internal Storage 1TB NVMe PCIe SSD 
External Storage Three 4Tb HDs

3 minutes ago, MrBitstFlyer said:

word not allowed, I'm back to blurry terrain after installing the latest driver and setting up DLSS 4.  Anyone else?

Ok here. Server problem? Sure DLSS4 is set up properly?

i910900k, RTX 3090, 32GB DDR4 RAM, AW3423DW, Ruddy girt big mug of Yorkshire Tea

40 minutes ago, MrBitstFlyer said:

word not allowed, I'm back to blurry terrain after installing the latest driver and setting up DLSS 4.  Anyone else?

I would not think that "world word not allowed" would come from you 🙂 I'll do a proper flight tomorrow and report back!

Edited by Cpt_Piett
Word - not world!

7950X3D | RTX 4090 | 64GB DDR5

8 minutes ago, Cpt_Piett said:

I would not think that "world not allowed" would come from you 🙂 I'll do a proper flight tomorrow and report back!

It was quite an innocent word, so a little taken aback it was replaced 😁

CPU Ryzen 7800X 3D  RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090
Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440
Internal Storage 1TB NVMe PCIe SSD 
External Storage Three 4Tb HDs

Very confused, I have installed dlss 4 and applied it into msfs via NVIDIA app override (override was enabled for me). Do I still need to override from NVIDIA inspector or I am good here?

AMD Ryzen 7 7800X3D, 64GB DDR5 6000MHZ RAM, RX7900XT, FreeSync 165hz 1440p display 

OK, I don't know what's going on with my system. A couple of hours ago I set everything up for DLSS 4. I have the regedit change to display the DLSS preset. It looked perfect and displayed that the preset is K. I left the sim up and went to do some shopping. When I came back the display had changed to J and now no matter what I do I cannot get it to show Preset K. I changed literally nothing.

Any ideas?

 

UPDATE: My problem seems to have been that I did not have the very latest DLSS files. I had 310.1 not 310.2. Seems to be displaying the correct values now.

Edited by Rob G

Case: (Lian Li PC-011 Dynamic XL), PSU: (MEG Ai300p pcie 5 & ATX 3.0), Motherboard: (ASUS TUF Gaming x670E-PLUS WIFI 6E), CPU: (AMD Ryzen 7 7800-X3D) 

Memory: (G.Skill Trident Z5 NEO RGB Series 64GB DDR5 6000), GPU: (Zotac Gaming GeForce RTX 4090 AMP Extreme Airo). CPU Cooler: (ASUS ROG Strix LC RGB 360) 

Fans: (7 Corsair LL Series 120mm RGB)

16 hours ago, MarsVenus said:

Can anyone tell me what is wrong here...After updating the Nvidia App and the latest driver 572.16 in Nvidia App it says that DLSS 4 does not support my MSFS 2020 (40th Anniversary Edition) an MSFS 2024???? My graphics card is ASUS RTX4080 Super 16GB. All the DLSS 4 settings are greyed out in the Nvidia app.

As a follow-up, I ignored all the greyed-out DLSS 4 settings in Nvidia app I mentioned in my earlier post above and followed the steps mentioned by @Ianrivaldosmith and I succeeded in getting DLSS 4 to work in both MSFS 2020 and 2024 although those settings in the Nvidia app remained greyed out.

4 hours ago, Cpt_Piett said:

I'm not sure if DLSS swapper is going to be the saviour here. As these files are nowadays handled by the latest Nvidia driver. Well, that's the way I understand it - things are still very messy. The latest version of Inspector is required however. Well, at least for me - both 2020 and 2024 DLSS override options were greyed out in the shiny new Nvidia App™.

Is it even possible to go from 38 FPS to 7 FPS with these updates. I installed the frame gen mod in MSFS 2020 and it has been a disaster. Basically, I followed al instructions and I am getting frames in single digits with DLSS 4 and the new driver. I confirmed I am running DLSS 4 through the registry. 
 

when I upload a flight, the screen starts flickering. I manually removed the frame gen mod files. It’s really bad.

Edited by Huascar

 

" If you're experiencing problems:

Stay updated: Keep your drivers, Nvidia app, and games updated to the latest versions.

Check official forums: Look for information and solutions on the official Nvidia and MSFS forums.

Engage with the community: Share your experiences and learn from others on platforms like Reddit or AVSIM.

Be patient: Hopefully, these issues will be resolved with future updates and patches. "

 

My answer would add to go on Youtube with a PC and search for solutions. Same thing if stuck banging around inside your PC with new hardware swaps. Youtube is the best source to find out.

5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB  PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.

 

1 hour ago, MrBitstFlyer said:

word not allowed, I'm back to blurry terrain after installing the latest driver and setting up DLSS 4.  Anyone else?

If blurry terrain were my only issue, I'd be ok.

16 minutes ago, Huascar said:

Is it even possible to go from 38 FPS to 7 FPS with these updates.

Yours is the very first report of this drop I have read anywhere.  You have so many problems that all appear to be severe, so I wonder if your PC is functioning correctly.

Personally, at the stage you appear to be, I would be removing everything related to MSFS and re-installing.  It only took me about 10 minutes to do this with 2024.

CPU Ryzen 7800X 3D  RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090
Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440
Internal Storage 1TB NVMe PCIe SSD 
External Storage Three 4Tb HDs

31 minutes ago, MarsVenus said:

As a follow-up, I ignored all the greyed-out DLSS 4 settings in Nvidia app I mentioned in my earlier post above and followed the steps mentioned by @Ianrivaldosmith and I succeeded in getting DLSS 4 to work in both MSFS 2020 and 2024 although those settings in the Nvidia app remained greyed out.

I also ignored the greyed-out DLSS 4 setting in the Nvidia app and still managed to get DLSS 4 to work. However, my performance is dismal.

I feel like taking my computer and throwing it in the middle of the ocean, but that would mean letting MSFS win.

I refuse to cave to a game.

Edited by Huascar

DLSS 4 2020 Pimax Crystal Light: about 34fps with medium settings. in 2D maybe 65 fps (with FG).

DLSS 4 2024 Pimax Crystal Light about 47 fps with medium settings, in 2D maybe 80 fps (with FG).

I had way more stutters before I went to DLSS 4.

(I'm in the Beta version of msfs 2024, I find it better in every way then the release version)

5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB  PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.

 

6 minutes ago, MrBitstFlyer said:

Yours is the very first report of this drop I have read anywhere.  You have so many problems that all appear to be severe, so I wonder if your PC is functioning correctly.

Personally, at the stage you appear to be, I would be removing everything related to MSFS and re-installing.  It only took me about 10 minutes to do this with 2024.

I enabled G-sync and I went up from 13 FPS to 38. However, I removed the Frame Gen Mod because the freaking sim got very unstable, with 5 FPS. It was so slow I couldn't even get out of it. Nice!

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.