Dirtybird1980

[removed - answered about the wrong thing] Personally, i never knew it could be removed in FS9 and I have no idea how to do it in FSX. sorry.

you can have 2 identical paint job aircrafts in your library, and when you want to do the return flight, just go up to AIRCRAFT / SELECT AIRCRAFT, get in the tail / flight number you want to be in and it will reload your aircraft and off you go. but to your original question, NO. There is no way, shape, form, or program to change your flight number "on the go" without reloading your aircraft in some fashion.

no air-superiority (air cover) while the 747 landed? tsk tsk. you can really tell its a 'company pilot'

to the OP: if you would like someone to take a look at the airports, and realign the ILS feathers for you, just let me know. I have the tools to be able to do that, and after I am done, would need your email address to send you the corrected files for your FSX. upon inspection of UHPP, I found that the Glide slope for ILS 34R was off to the Right side of the runway by as much as 10 feet. I have corrected it to the end of the runway so that it should put a plane down about 20 feet past the 34R numbers. LBBG: as you can see in the pic below, the green arrow is the Glideslope, which is putting you into the grass, like the video above shows. I have now relocated it to the middle of the runway again, about 20-25 feet past the numbers. (I have also given UHHP, and LBBG runways new paint jobs to include Aiming Bars and Threshold stripes, as well as edge pavement and edge lines, and both are now "Precision" runways)

sounds like a RAM issue.... KERNELBASE.dll is the culprit that caused the error. Quite possibly the scenery is not loading into the memory like it should. Try flying your new scenery again, maybe 2-3 more times .... start with the same aircraft that you were in, then switch it up to different DEFAULT aircraft to make sure that it really is something to do with the scenery. Then Turn off the scenery, but do not delete it (uncheck it in the library) and fly the area 1 more time. 1) if it crashes with all aircraft its the scenery. 2) if you still keep getting the crashes WITH the scenery ON, but not when the scenery is off.... sorry to say it, uninstall the scenery. you can try to reinstall the scenery to see if it fixes itself, but that will be up to you. If it is a RAM issue, depending on how old your computer is, and what your specs are (i didn't check them) you might have to buy some new Ram.

what are you using for your weather? Rex+Opus? Active Sky? FSX Default Real World Weather? FSX Fair Skies? FSX Clear Skies???? Any of these could be the culprit. I have MANY times been as low as on the ground, up to FL350 and had winds as strong as 80 Knots!!! I've even flown out to a hurricane off the coast of Bermuda one time, and had winds in excess of 115 Knots!! .... this was while I have the Registered Version of FSUIPC also.

I was even going to throw out there, if your motherboard has the slots for it, and you can run 8Gig of ram... possibly getting 4 - 2Gig matched sticks, but in that some performance might be compromised versus just having 2 - 4Gig sticks. It might be a little better, but then it might be worse. Ram sticks almost act like Cores on a CPU. The extra Ram is not really used until it is needed to run an application. if you have 4 - 2Gig sticks, and only want to play Solitare, then most likely only 1 - 2Gig stick will really be used with 6Gigs waiting to be used. But where as if you want to run FSX, then 4 Gigs will only be used as that is the max that FSX will call for, leaving the other 4Gigs for the rest of the system processes that need it. FSX will also only run, I believe, on a max of 3-4 cores... so if you have 2 Quad-core CPUs (total of 8 cores), then only 3-4 will get used for FSX leaving the rest for the rest of Windows, Internet Explorer, Fraps, etc...

the problem lies in the B767eadi.GAU (gauge file) I do not know, however, if the problem only exists when you have FS2Crew and the leveld767 installed at the same time. 1 of the 2 definately needs to be reinstalled, if not BOTH.

get the 2x4Gig... if you spread out the load, instead of information being written and read from just the 1 stick, .. it will be more evenly distributed across the 2 sticks and be able to be written and read faster. Then you would also be able to test which is actually faster... the 1 stick, or the 2x4 set. either way, if your Ram messes up later, then all that you will have to do is swap it out for the other that you have put away and you are up and running again in litterally 5 minutes. I'm guessing that you did not read the ENTIRE op...

could it possibly be that somehow you are or were using at one time, an Iphone, or Tablet of some kind as a monitor for SOMETHING... GPS or whatever..?? Maybe you just forgot about it, and didnt turn it on.

go for the 2x4gig

well not being at your house we can not tell you WHERE #3 monitor is located. you should be able to somehow force the CDU to use #3, but I'm not 100% sure how to go about setting that up. From what I see in your picture, #3 is Disconnected, your computer probably created #4 to handle the CDU being that #3 is disconnected....... that is if I am looking at it correctly.

get a pair of USB Headphones. there is something in the USB, that you can split the sound from your engines (going to your speakers) and everything else..... RC4, Teamspeak 3, FSX ATC going to your USB Headphones. I believe all you have to do is tell the program which device is to be used for what... no matter what the outcome is, you ARE going to spend some money. It is inevitable, and resistance is futile.

ok, i see 1 airport, where is the other 99 airports in your list of 100 airports?

if you have FSPanel Studio there maybe a function in there to be able to remove the "boarder" around the gauges. I fly FSX in windowed mode and NONE of my popup gauges have boarders showing. Just the gauge. This is for EVERY aircraft.

love the colors in #4, and the feeling of "I really shouldn't be here in #8. Great job!!!

now that you have your Sectional all sorted out, I hope you have a great time flying your new scenery!

check your FSX / Addon Scenery / Blue Sky SFO folder to make sure there is a Scenery folder, and Texture folder in it. and inside the Scenery folder, you see the .bgls that are supposed to be there (Verify against your download from Blue Sky Scenery) as well as the textures that are supposed to be there ARE actually in the correct folder.

Airport Design Editor will allow you to put the blue apron edge lights that you are looking for around the airport ramp area, it will allow you to place Ramp Flood Lights (street lights), you can move taxiways or create new ones, move or create new runways, place buildings... anything you want. All textures are default FSX. you may need however, FSX SDK in order to "Compile" your airport scenery into a .bgl file for FSX to read. If you need some help in upgrading your airport, just let me know by PM, and I can take a look at it, and we can get together sometime on TeamSpeak and you can tell me exactly where you want what, and I'll build it for you. here is a sample of a small heliport that I created in Florida...

Here is what I use, and it's FREE.... Airport Design Editor 1.50.4402 http://www.airportdesigneditor.co.uk/index.html

I can max out FSX now, doesn't mean it is going to be "Smooth" 30fps. If this is what you are looking for, you will probably need something from Win20 era... that is backwards compatible software to allow FSX to even install

can i tell what it is, please please please??? (jumps up and down excitedly with hand raised in the air)

have you tried pressing "S" to or "A" to cycle your views? S changes category, A changes views in selected category

i just use the - key (minus) and put it at 30%. but i do not know how to make it stay that way permanently which I believe is what you are asking for. ... but it has something to do with one of the Camera Definitions i think.

Please let me start of by saying that I have read EVERY SINGLE POST in this thread, and while I do agree with some of the members, and Not agree with some of the members, I do fully agree with the staff and the way that they handled things. I never had the opportunity to meet Word Not Allowed, or use any of his guides (as I am sure some of them would have been helpful as I am currently having my own FSX problems), but for the most part I agree. What had to be done, was done. He didn't want to play nicely, so he was TOLD to leave when he refused to go quietly. Now on to the meat of my reply... Per the AVSIM TOS: and I quote if I may: Meaning... if AVSIM gets sued because of something you say, AVSIM (the company) can, and will seek reimbursement for any and all legal fees associated to your actions / posts / downloads / uploads. I do not have that kind of money, so please, go easy on me when you sue me. I fully agree with this. Verbatim Microsoft's Flight Simulator X EULA: (If I may provide it, if the moderators want to remove it, do so as you see fit) Word Not Allowed repeated broke this rule from Microsoft and may be liable for punitive damages, though I SERIOUSLY doubt that Microsoft will ever do anything about it... he was trying to tell others how to take elements from FSX and put it into P3D as we are some sort of Developers ourselves. I know that I am not (other than adding scenery to FS9 and or FSX that I create mainly for myself, and downloaded that others made available). If you want to break your EULA, KEEP YOUR FREAKING MOUTH SHUT AND DON'T TELL PEOPLE WHAT YOU ARE GOING TO DO, ARE DOING, OR HAVE DONE.