March 22, 201610 yr I'm having an issue with crashing the sim with an api.dll error.... I am using the traffic optimizer over a network install and it connects and begins working fine. I auto optimize and it picks up my flight plan from the shared directory over the network and populates the airports just fine. It then deletes traffic and all works normally until I take off. Shortly after take off the sim crashes just as traffic optimizer says on the screen that it's unable to find the plan in C:\Flight Simulator\Programs\Air Traffic Manager\*.PLN It's looking for a .PLN file in that local directory that isn't there and it crashes the sim....it doesn't show a file name just a .PLN extension but all of my flight plans are on the network shared folder that is on my server computer. I can't use the optimizer because of this as it crashes the sim. Any suggestions? Brandon
April 17, 201610 yr Howdy - great tool! What is the purpose of the Aircraft Browser button/function? Thank you, Marc
April 17, 201610 yr Howdy - great tool! What is the purpose of the Aircraft Browser button/function? Thank you, Marc To see what aircraft you have flying in the sim alongside you. Shanan ASUS Z170 PRO, I7 6700K @ 4.85ghz (HT ON), ZOTAC AMP EXTREME 1080TI GTX (OC), 16 GB DDR4 G.SKILL TRIDENTZ RGB @ 3230MHZ CL 16-17-17-33 (OC) 4X SSDS : WIN 10 (NVME 960 EVO) + P3D + OTHER GAMES, 2X WD BLACKS RAID 0 + 1 SEAGATE BARRACUDA, CORSAIR AX860i PSU, CORSAIR 760T CASE (BLACK), 27 INCH IPS PREDATOR GSYNC 165HZ 1440p + 24 INCH IPS DELL 1080p, THRUSTMASTER HOTAS FCS THROTTLE + FCS16000M CORSAIR K95 RGB + CORSAIR M65 RGB + CORSAIR MM800 POLARIS RGB, CORSAIR H115i v2, CREATIVE GIGAWORKS 7.1 + ASUS D2X XONAR
May 10, 201610 yr I'm having too many ATM 1.9.1.3 crashes just after P3D 3.2 loads, what can I do to prevent this? I tried loading it within EXE.XML and FSUIPC, but either methods still crash it frequently. Thanks! Best regards, Wanthuyr Filho Instagram: AeroTacto
May 10, 201610 yr Commercial Member I'm having too many ATM 1.9.1.3 crashes just after P3D 3.2 loads, what can I do to prevent this? I tried loading it within EXE.XML and FSUIPC, but either methods still crash it frequently. Thanks! Try loading it in FSUIPC but using the 'READY' keyword, so it doesn't try to do things whilst FS is furiously busy loading AI and meeting demands from all sorts of loading programs. Pete Win10: 22H2 19045.2728 CPU: 9900KS at 5.5GHz Memory: 32Gb at 3800 MHz. GPU: RTX 24Gb Titan 2 x 2160p projectors at 25Hz onto 200 FOV curved screen
May 10, 201610 yr Try loading it in FSUIPC but using the 'READY' keyword, so it doesn't try to do things whilst FS is furiously busy loading AI and meeting demands from all sorts of loading programs. Pete Hey Pete, can you provide me with the correct syntax and where to add it in the fsuipc engine ? I am some kind of lost with this as i have the same issues with crashing. Thanks for your help ! Carsten Carsten U
May 10, 201610 yr Commercial Member Hey Pete, can you provide me with the correct syntax and where to add it in the fsuipc engine ? I am some kind of lost with this as i have the same issues with crashing. Thanks for your help ! Carsten Please see the FSUIPC Advanced Users Guide, page 46. Pete Win10: 22H2 19045.2728 CPU: 9900KS at 5.5GHz Memory: 32Gb at 3800 MHz. GPU: RTX 24Gb Titan 2 x 2160p projectors at 25Hz onto 200 FOV curved screen
May 12, 201610 yr Commercial Member I migrated to UT2 yesterday, or better to say installed it again after two years of using MT6 and I think I made the right choice! 10% better fps and the models look much much better!Now, UT2 has that service.exe thingy that controls spawning of AI planes, so I'm lost now should I use Air Traffic Manager? ATM works great with MT6, at least 15% better fps with it! UT2 + ATM didn't gave me much better fps, maybe 5% at most, but I'm interested will ATM have any impact when using UT2?Cheers! Current system: ASUS PRIME Z690-P D4, Intel 12900k, 32GB RAM @ 3600mhz, Zotac RTX 3090 Trinity, M2 SSD, Oculus Quest 2.
May 12, 201610 yr I migrated to UT2 yesterday, or better to say installed it again after two years of using MT6 and I think I made the right choice! 10% better fps and the models look much much better! Now, UT2 has that service.exe thingy that controls spawning of AI planes, so I'm lost now should I use Air Traffic Manager? ATM works great with MT6, at least 15% better fps with it! UT2 + ATM didn't gave me much better fps, maybe 5% at most, but I'm interested will ATM have any impact when using UT2? Cheers! Didn't do a great test but seem to be seeing about the same results not much different - thinking because UT2 runs outside of sim it may not be a big benefit with this program so I dont think you are the only one - take note this was long time ago so not sure now with these newer builds of P3D Rich Sennett
May 12, 201610 yr Commercial Member Didn't do a great test but seem to be seeing about the same results not much different - thinking because UT2 runs outside of sim it may not be a big benefit with this program so I dont think you are the only one - take note this was long time ago so not sure now with these newer builds of P3D So I guess UT2Services.exe is doing its job. Somehow I'm glad to hear that. Current system: ASUS PRIME Z690-P D4, Intel 12900k, 32GB RAM @ 3600mhz, Zotac RTX 3090 Trinity, M2 SSD, Oculus Quest 2.
May 12, 201610 yr So I guess UT2Services.exe is doing its job. Somehow I'm glad to hear that. Exactly but not all is great in tinsel town - I am experiencing some stutters with UT2 - shut it off they are gone - have to revisit with lower ai % - wish they would re-visit this program and optimize it for P3D - would be great for a developer to create quality looking ai that works well - one can hope Rich Sennett
May 12, 201610 yr Exactly but not all is great in tinsel town - I am experiencing some stutters with UT2 - shut it off they are gone - have to revisit with lower ai % - wish they would re-visit this program and optimize it for P3D - would be great for a developer to create quality looking ai that works well - one can hope Maybe we can crowdsource it like with RSP, Rich. "If you build it, we will come!" BasementFlyGuy GA home cockpit running X-Plane 11 (and sometimes P3D) Blog: www.ontheglideslope.net YouTube: OnTheGlideslope Channel Facebook: On The Glideslope
May 12, 201610 yr Maybe we can crowdsource it like with RSP, Rich. "If you build it, we will come!" Wish I knew how - beyond me thats for sure :( Rich Sennett
May 12, 201610 yr Exactly but not all is great in tinsel town - I am experiencing some stutters with UT2 - shut it off they are gone - have to revisit with lower ai % - wish they would re-visit this program and optimize it for P3D - would be great for a developer to create quality looking ai that works well - one can hope Flag Mountain Software actually came out of hiding and made some kind of stand alone ATC thing so maybe they will start back with UT2 now.
May 12, 201610 yr Flag Mountain Software actually came out of hiding and made some kind of stand alone ATC thing so maybe they will start back with UT2 now. Well that would be great - many would pay for their efforts - thanks Rich Sennett
Archived
This topic is now archived and is closed to further replies.