March 28, 20215 yr I added the second runway and taxiways using ADEX and made some altitude adjustments to the original YBBN. Since I fly night freight almost exclusively, I tend to not want to upgrade. I'll relook at it after some of the bugs have been cleared up. I Earned My Spurs in Vietnam
March 28, 20215 yr Performance is good. But it shows texture morphing of apron marking lines at several places. Hope the get it fixed. - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
March 28, 20215 yr Performance does seem good and the airport is very nice. However, does YBBN not have runway exit lighting or green centerline taxiway lighting? I have none in my installation.
March 29, 20215 yr After a bit try and error I think the flickering ground textures do result from an incompatibility with Envshade. Disabling Envshade and using default shaders does remove the flickering of the black patches on the asphalt texture. But they reappear as soon as Envshade is installed again. For me it is the first time I see that Envshade is affecting the ground textures of an airport in such a way. @kmax59 I recorded a short clip that illustrates the problem. The layering issues of the ground lines at the end of the video are, however, not related to Envshade and a separate issue. PS: Perhaps a moderator like @Ray Proudfoot could merge the two Brisbane topics in the P3D forum? Thanks 🙂 Best, Christoph Display resolution: 1920x1080 (8xSSAA) GPU: 1080TI CPU: i7-7700K (5.0 OC) RAM: 16GB SSD: Samsung 850Evo Monitor: 27K
March 29, 20215 yr Moderator 7 minutes ago, Wolkenschreck said: PS: Perhaps a moderator like @Ray Proudfoot could merge the two Brisbane topics in the P3D forum? Thanks 🙂 Done. 👍 Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
April 1, 20215 yr Just flown into there for the first time. My PMDG FMC says there are 2 runways but there is only one. Is the scenery out of date already? Intel i7 6700K @4.3. 32gb Gskill 3200 RAM. Z170x Gigabyte m/b. 28" LG HD monitor. Win 10 Home. 500g Samsung 960 as Windows home. 1 Gb Mushkin SSD for P3D. GTX 1080 8gb.
April 1, 20215 yr 1 hour ago, IanHarrison said: Just flown into there for the first time. My PMDG FMC says there are 2 runways but there is only one. Is the scenery out of date already? If there's only one I suspec you've installed the old version. Cheers,John TavendaleTextures by Tavers - https://www.facebook.com/texturesbytavers
April 1, 20215 yr 11 minutes ago, B777ER said: It says that v2 of Australia is required but is it really? No, just a shady gimmick by Orbx that everyone seems to be ok with for some reason.
April 1, 20215 yr 9 hours ago, John_Tavendale said: If there's only one I suspec you've installed the old version. No, sorry my mistake, I meant there is only one 19 / 01, not 2 parallel runways. It is the new version. Intel i7 6700K @4.3. 32gb Gskill 3200 RAM. Z170x Gigabyte m/b. 28" LG HD monitor. Win 10 Home. 500g Samsung 960 as Windows home. 1 Gb Mushkin SSD for P3D. GTX 1080 8gb.
April 1, 20215 yr 59 minutes ago, IanHarrison said: No, sorry my mistake, I meant there is only one 19 / 01, not 2 parallel runways. It is the new version. I'd go back and look at your scenery config then, because the screenies of the new V2 scenery clearly show the parallels. Is the old one still installed, perhaps? Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
April 1, 20215 yr The new scenery definitely HAS the new parallel. i7-13700KF, 32gb DDR4 3200, RTX 4080, Win 11, MSFS 2024
April 1, 20215 yr 7 hours ago, Chapstick said: No, just a shady gimmick by Orbx that everyone seems to be ok with for some reason. Required or not, AUv2 is incredibly better than the original. As such, i highly recommend it. The new ORBX YBBN very clearly shows two parallel runways and I suspect, as mentioned by w6kd, that you may not have uninstalled the original version. I remember seeing an instruction that this version needs to be uninstalled and it asks during the install whether you want to uninstall it. Because of this factor, I would wonder whether or not it was uninstalled and would investigate it further. Good luck with this Tony Tony Chilcott. My System. Motherboard. ASRock Taichi X570 CPU Ryzen 9 3900x (not yet overclocked). RAM 32gb Corsair Vengeance (2x16) 3200mhz. 1 x Gigabyte Aorus GTX1080ti Extreme and a 1200watt PSU. 1 x 1tb SSD 3 x 240BG SSD and 4 x 2TB HDD OS Win 10 Pro 64bit. Simulators ... FS2004/P3Dv4.5/Xplane.DCS/Aeroflyfs2...MSFS to come for sure.
April 2, 20215 yr Thanks for all the help. To be sure, I completely removed anything to do with YBBN and re-installed from new, making quite sure it was V2. As you all suspected, something had gone wrong and V1 was obviously not completely removed. Happy to say all is now correct. Intel i7 6700K @4.3. 32gb Gskill 3200 RAM. Z170x Gigabyte m/b. 28" LG HD monitor. Win 10 Home. 500g Samsung 960 as Windows home. 1 Gb Mushkin SSD for P3D. GTX 1080 8gb.
April 2, 20215 yr Quick question, I have the original AU. If I get AUv2 do I have to uninstall V1 first ? Thanks Neil Ward CPU Intel Core i7 [email protected] with FrostFlow 240L Liquid Cooling, M/B ROG STRIX X299-E-GAMING, NVIDIA GeForce GTX 1080 Ti, RAM G.Skill 32GB DDR4 Ripjaws Blue,
Archived
This topic is now archived and is closed to further replies.