29 minutes ago, Matchstick said:

So far I've identified 13 plane that cause the my copy of the SU11 to CTD when starting
Carenado Seneca V
Carenado Seminole
Carenado PC12
BR SimDesigns H35
Flying Iron Spitfire
Just Flight 146
Just Flight Hawk
Just Flight Arrow III
Just Flight Turbo Arrow III & IV
Just Flight Warrior II
Milviz C310
Milviz Corsair
Wings42 247

Are you sure you don't have GAIST V2 enabled? I thought it was some of my planes causing the crashes too but it was GAIST. I have some of those planes and they are not crashing my sim.

16 minutes ago, Alvega said:

Are you sure you don't have GAIST V2 enabled? I thought it was some of my planes causing the crashes too but it was GAIST. I have some of those planes and they are not crashing my sim.

Thanks for the suggestion

I do have GAIST V2 installed and the sim will only run with those planes disabled so next step is to take GAIST out and see if I can run with any of those planes back in.

2 minutes ago, Matchstick said:

Thanks for the suggestion

I do have GAIST V2 installed and the sim will only run with those planes disabled so next step is to take GAIST out and see if I can run with any of those planes back in.

I'd bet you can, but let's see.

Strange I have GAIST a number of those planes installed and have no CTD

1 minute ago, styckx said:

Strange I have GAIST a number of those planes installed and have no CTD

You have GAIST V2 or the first version?

1 minute ago, Alvega said:

You have GAIST V2 or the first version?

The V2 beta. I get moving ships and all

2 minutes ago, styckx said:

The V2 beta. I get moving ships and all

Yes, that's what I have too, but had to disable it because sim would freeze when loading a flight or leaving a flight to the main menu, but not always. 

35 minutes ago, Alvega said:

I'd bet you can, but let's see.

Weirdly things seem worse after just disabled GAIST and before adding anything else back in.

Going to have shelve this for the moment and look again tomorrow.

1 hour ago, Matchstick said:

So far I've identified 13 plane that cause the my copy of the SU11 to CTD when starting
Carenado Seneca V
Carenado Seminole

no..

to quote Mungo Jerry one more time:

"Some say that, some say this
Some say no, I say yes"

are you using the latest Carenado versions? both Carenados, Seminole and Seneca run just fine:

SU11 beta, DX 12 DLSS  @4K.

I apologize for the low 59 fps, my TV does only 60 Hz:

Carenado Seneca - CZST Stewart - real weather

 

Carenado Seminole, here seen next to the North Pole in CZST 😀:

 

Seneca v 1.4.0

 

Seminole v1.8.0

quod erat demonstrandum.

as Mungo Jerry, said/sung/wrote in 1973:

"Oh, I've been thinking 'bout my life
What's been wrong and what's been right
Alright, alright, alright
Alright, alright, alright

Oh, I don't know what's going on
But I know what's right from wrong
Too many heads and too many minds
Too many wrongs and too many rights"

Edited October 13, 20223 yr by turbomax

AIG Injected traffic is working better than it did in SU10 in one way, enroute aircraft at cruise altitude no longer start descending for no apparent reason after spawning.

Edited October 14, 20223 yr by Tuskin38

7 hours ago, Matchstick said:

So far I've identified 13 plane that cause the my copy of the SU11 to CTD when starting
Carenado Seneca V
Carenado Seminole
Carenado PC12
BR SimDesigns H35
Flying Iron Spitfire
Just Flight 146
Just Flight Hawk
Just Flight Arrow III
Just Flight Turbo Arrow III & IV
Just Flight Warrior II
Milviz C310
Milviz Corsair
Wings42 247

my situation:

SU 11 WOULD NOT BOOT ---
____

ROLLED BACK TO SU 10 ON STEAM, BY VERIFYING ALL MSFS FILES
BUT 132 PACKAGES IN CONTENT MANGER STILL NEEDED TO BE INSTALLED. 
NOW MSFS  BOOTED UP FINE  and ran perfectly +++
____
INSTALLED ALL THESE 8 FROM CONTENT MANAGER AT SAME TIME (ALL CARENADO). 
NOW MSFS WOULD NOT BOOT.---

GEEBEE Z
GEEBEE R2
WYMF5 WACO
C 195
D 18S
D 17 STAGGERWING
C 170B
V 15 BONANZA
___
REMOVED ALL 8 AGAIN
OF COURSE NOW MSFS BOOTED UP FINE. +++
___
REINSTALLED ALL 8, BUT ONE AT A TIME:

GEEBEE Z (MSFS STILL BOOTED UP FINE). +
GEEBEE R2 (MSFS STILL BOOTED UP FINE).+
D17 (MSFS STILL BOOTED UP FINE).+
D18S (MSFS STILL BOOTED UP FINE).+
C 170B (MSFS STILL BOOTED UP FINE)+
WYMF5 WACO (MSFS STILL BOOTED UP FINE)+
V 15 BONANZA (MSFS STILL BOOTED UP FINE)+
C195 BUSINESS LINER (MSFS WOULD _not_ BOOT) - <===

I conclude 7 out of these 8 by Carenadao are just fine in SU11 on my installation.
.. but C195 BUSINESS LINER is faulty and prevents MSFS from booting.

NOTE: ALL TESTS DONE WITH OVER 100 ITEMS STILL IN COMMUNITY DURING THE TESTS.

 

7 hours ago, styckx said:

Strange I have GAIST a number of those planes installed and have no CTD

No issues for me either in regards to GAIST and the Wings 42 247.

No issues at all except for one CTD the first time I loaded a flight with the new Hype hot air baloon but then it worked fine.

I feel a bit insure to admit that I have not experienced any issues with SU11 Beta as they have been reported here and in the MSFS forums. I did as usual, disabled all my add-ons with Addon Linker. Run MSFS (MS store version with a separate content drive) installing all SU11 updates. Then re-activated my add-ons block wise, first all libraries and worldwide content, which includes GAIST v2, a-puf-we-love-vfr-regions, a-mamudesign add-ons, etc. No problems detected. Then I added all my other scenery add-ons continent by continent. In the end, I have now several hundreds add-ons running with SU11 Beta. Regarding aircraft, I have not tested so many, only TBM 930 (with WT G3000) and PMDG 738.

Edited October 14, 20223 yr by Nemo

It seems to be somewhat user specific, which is a bit strange. Or perhaps it's something to do with addon combinations, dunno. Apart from GAIST causing freeze/CTD on flight loading like @Alvega mentioned, SU11 has been quite stable so far.

This morning I've been flying the analog King Air in Norway with a few freeware and payware airports, a freeware DEM10 mesh as well as (please don't shoot me) Taburet (?!) coastline morphing and trees fixes. Oh, and AccuSeasons, a freeware tree size fix and FSLTL models 🙂 All without issues. 

*runs for cover*

Edited October 14, 20223 yr by Cpt_Piett

4 minutes ago, Cpt_Piett said:

It seems to be somewhat user specific, which is a bit strange. Or perhaps it's something to do with addon combinations, dunno. Apart from GAIST causing freeze/CTD on flight loading like @Alvega mentioned, SU11 has been quite stable so far. This morning I've been flying the analog King Air in Norway with a few freeware and payware airports, a freeware DEM10 mesh as well as (please don't shoot me) Taburet (?!) coastline morphing and trees fixes. Oh, and AccuSeasons, a freeware tree size fix and FSLTL models 🙂 All without issues. 

*runs for cover*

I agree it's definitely more complex than just individual models causing problems from everyone but I guess that's part of the reason for a wide beta - I just wish we had more than 1 month to identify issues and for devs to get fixes rolled out.