June 13, 20241 yr On 6/12/2024 at 3:50 PM, GSalden said: Thank you Kevin for your testing. Using default FG my center monitor is always smooth. The right monitor is almost smooth the entire time It is the left monitor that sometimes has jittering but that might be because it is connected to another pc using WidevieW. For WidevieW it is important to sent as much packages (with coordinates) from server to client, so restricting the server to 30 it will update the clients position 30 times/second. I might try this app on my left view pc to see if it helps getting it smoother. The framerate is no issue on that pc : most of the time 120 with FG on and sometimes it goes down as low as 94. Using Unlimited proved the best on both pc’s. So I am not sure if this app will help as I need to limit the framerate … Hi GSalden, Did you have any luck in getting the program to work across multiple displays? I've been playing around with it this evening and tried a variety of setting combinations (including trying to run two instances of the application and applying one to each monitor) without success. The way its been described as working (replicating whats on the screen as opposed to being produced by the game itself) led me to think perhaps its possible - But alas I can't see a way 😞 Kael Oswald 9950X3D/ 64GB DDR5 6200 @ CL30 / Custom Water Loop / RTX 5090 / 3 x 48" LG C4 OLEDs
June 13, 20241 yr Have it up and running, increased smoothness and no artifacts so far, but also can’t get any FPS counter to appear, either through GeForce overlay or LSFG counter. Any ideas? i910900k, RTX 3090, 32GB DDR4 RAM, AW3423DW, Ruddy girt big mug of Yorkshire Tea
June 13, 20241 yr So on a 3080 card, previously using the FG mod, do I have to get rid of that before using this? I've been getting lots of stutters but high FPS, and have played around extensively with different settings. I've also had trouble getting it to work with FSHud. It seems to lose focus, stop and start whenever I interact with the FSHud menu. Edited June 13, 20241 yr by Langeveldt
June 13, 20241 yr B450 Tomahawk Max / Ryzen 7 5800x3D / RTX 3060ti 8G / Noctua NH-UI21S Max Cooling / 32G Patriot RAM / 1TB NVME / 450G SSD / Thrustmaster TCA & Throttle Quadrant / Xiaomi 32" Wide Curved Monitor 1440p 144hz
June 13, 20241 yr 1 hour ago, Langeveldt said: So on a 3080 card, previously using the FG mod, do I have to get rid of that before using this? I've been getting lots of stutters but high FPS, and have played around extensively with different settings. I've also had trouble getting it to work with FSHud. It seems to lose focus, stop and start whenever I interact with the FSHud menu. I would not use the FG Mod with this as I see no reason to do so. I've tried FG mod and this is far superior with my setup. Ryan
June 13, 20241 yr 1 hour ago, KL Oo said: Hi GSalden, Did you have any luck in getting the program to work across multiple displays? I've been playing around with it this evening and tried a variety of setting combinations (including trying to run two instances of the application and applying one to each monitor) without success. The way its been described as working (replicating whats on the screen as opposed to being produced by the game itself) led me to think perhaps its possible - But alas I can't see a way 😞 Hi KL Do, Like with default FG it only works with the main screen. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
June 13, 20241 yr The reason this program is a "miracle" for my setup is I am running a 3080ti 12GB in 4k. DX12 runs abysmally in MSFS unless I turn VRAM impact settings down to low and so I use DX11 where it only falls to 30FPS using Fenix/PMDG at large, detailed airports (e.g. ini KLAX). The FG mod requires the use of DX12 so it was just a stutter fest. I can use the Lossless app in DX11 with mostly high settings in 4k and get a rock solid 60FPS now (monitor refresh rate). Heck, you could use it in King's Quest if you wanted too🤣. I have also tried it in a couple of flights in XP12 with perfect results. I was able to raise LOD settings until I could maintain a steady 30FPS and then start the app and be pegged at a smooth 60FPS. I also like how to can turn it on and off on the fly with a hotkey. This app does increase GPU usage quite a bit but as soon as the autopilot comes on I can hotkey it off and since I've locked the sim to 30FPS as per the instructions, my GPU runs nice and low for the cruise. I can hotkey it back on as I approach TOD. It's really fantastic imo. Ryan
June 13, 20241 yr 11 minutes ago, rjack1282 said: I also like how to can turn it on and off on the fly with a hotkey. This app does increase GPU usage quite a bit but as soon as the autopilot comes on I can hotkey it off and since I've locked the sim to 30FPS as per the instructions, my GPU runs nice and low for the cruise. I can hotkey it back on as I approach TOD. It's really fantastic imo. I cannot get the hotkey to do anything unless the LFSG app is 'in-focus' so once MSFS is full screen it does not work.... Eric i9-12900k, RTX 5070ti OC, 32GB ddr5 5600 RAM, 2TB 980 Pro SSD, Titan 240RX AIO, Samsung CRG90 49", Win 11
June 13, 20241 yr 4 minutes ago, Flic1 said: I cannot get the hotkey to do anything unless the LFSG app is 'in-focus' so once MSFS is full screen it does not work.... Weird, I haven't had that issue. I have the app minimized to the system tray most of the time and hotkey works fine. I'm using the default ctrl+alt+s. Ryan
June 13, 20241 yr I've never been able to find the MSFS.exe on my system apart from the desktop shortcut. According to that under properties it should be in \AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\AppData but that folder is empty with noting hidden as far as I can tell. Anybody know where to find it? Intel Core i9-10900K at 5.2GHz, Corsair H115i PRO, ASUS MAXIMUS XII HERO Z490, G.SKILL Ripjaws V Series 32GB (4 x 8GB) 15-16-16-36, ASUS TUF Gaming GeForce RTX 3090, SAMSUNG 970 EVO PLUS M.2 2280 1TB x 3, Corsair HX Series HX1000 Watt PSU, Pimax Crystal LIght.
June 13, 20241 yr 5 minutes ago, FBW737 said: Anybody know where to find it? If you have a so-called "modern" installation, the .exe default location should be: C:\XboxGames\Microsoft Flight Simulator\Content If you've got a "legacy" installation, it's not possible to access the folder where the .exe is. Edited June 13, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
June 13, 20241 yr I'm seeing a bit of progress now I have actually disabled the current FG I had on. It still interacts poorly with FSHud though. The FG seems to flip on and off whenever something happens in FSHud.
June 13, 20241 yr Just now, Langeveldt said: It still interacts poorly with FSHud though. The FG seems to flip on and off whenever something happens in FSHud. I'm getting this too. Also, hard to interact with the FSHud interface as the mouse pointer "disappears" behind the interface. 7950X3D | RTX 4090 | 64GB DDR5
June 13, 20241 yr 4 minutes ago, Cpt_Piett said: I'm getting this too. Also, hard to interact with the FSHud interface as the mouse pointer "disappears" behind the interface. I haven't been able to complete a flight because of this MS server outage. Do you find FSHud unusable? Or is it just irritating?
Create an account or sign in to comment