October 20, 20241 yr I've only done 1 flight so far but the pause at TOD didn't work. Anybody having issues? Thanks. A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
October 20, 20241 yr 4 hours ago, mac44 said: thanks I was fully aware of this - strangely having to open it manually - so to reset it do you just hit the delete button and reinstall the .xmp - assume it just adds a line to the MSFS start up config file? I do that over the IFLY Manager, in the left upper side you have two clickboxes, i am not on PC now but think its the second one there you have the options to set this code to the exe.xml file and there is on to delete the entry and one to set the entry, so i delted the entry close the App and started again new and set the entry again and since i done this it works perfect. cheers 😉 08.2024 new PC is online : ASUS ROG STRIX X670E-F GAMING WIFI Mainboard, AMD Ryzen™ 9 7950X3D Prozessor, G.Skill DIMM 64 GB DDR5-6000 (2x 32 GB) Dual-Kit, MSI GeForce RTX 4090 VENTUS 3X E 24G OC Grafikkarte, 2x WD Black SN850X NVMe SSD 4 TB - Drive C+D, WD Gold Enterprise Class 12 TB for storage HDD, Thermaltake Toughpower GF3 1000W PC - Power supply, Thermalright Phantom Spirit 120 EVO CPU Aircooler with 7 Heatpipes, Design Meshify 2 White TG Clear Tint Tower-Case, 3x 4K monitors 2x32 Samsung 1x27 LG 3840x2160, Windows11 Prof. 23H2 - now Windows11 Prof. 25H2 Flightsimulator Hardware: Honeycomb Throttle Bravo, Logitech Extreme 3D Pro, Logitech Flight Joke System, XBox Controller, some Thrustmaster stuff, Winwing CDU Panels.
October 20, 20241 yr 1 hour ago, Dreamflight767 said: I've only done 1 flight so far but the pause at TOD didn't work. Anybody having issues? Thanks. Aaron, It works for me. Just be sure you save the setting after you click on it. I believe the save button is in the lower left corner. When it is activated and pauses the left ND will pop up and say click here to unpause. Pretty cool. Good luck!
October 20, 20241 yr I'm unable to use tiller with the rudder pedals. Just bought this thing and want to like it. Is there a setting in the EFB that I'm simply overlooking? Jacek G. Ryzen 5800X3D | Asus RTX4090 OC | 64gb DDR4 3600 | Asus ROG Strix X570E | HX1000w | Fractal Design Torrent RGB | AOC AGON 49' Curved QHD |
October 20, 20241 yr 3 minutes ago, Drumcode said: I'm unable to use tiller with the rudder pedals. Just bought this thing and want to like it. Is there a setting in the EFB that I'm simply overlooking? Yes there is.
October 21, 20241 yr 10 hours ago, toddl said: Aaron, It works for me. Just be sure you save the setting after you click on it. I believe the save button is in the lower left corner. When it is activated and pauses the left ND will pop up and say click here to unpause. Pretty cool. Good luck! Thank you! I'll try to again. A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
October 21, 20241 yr I'm enjoying the iFly, it has great potential and packs so many features. There are bugs though, the autothrust is overriden constantly by throttle spikes so you can't do a 60% spool before takeoff but they're fixing it. I've found that it can also struggle in turbulence and constantly fights the magenta line with large roll inputs. I think this may just be due to how MSFS implements turbulence as the PMDG 777 has behaved for me in a similar way. Landing into Liverpool yesterday at the edge of the crosswind limit was fun but extremely challenging. It is certainly one of the better aircraft to hand fly, the feel is one of the best I've had in MSFS. Lawrence Ashworth
October 21, 20241 yr 38 minutes ago, G MIDY said: I'm enjoying the iFly, it has great potential and packs so many features. There are bugs though, the autothrust is overriden constantly by throttle spikes so you can't do a 60% spool before takeoff but they're fixing it. I've found that it can also struggle in turbulence and constantly fights the magenta line with large roll inputs. I think this may just be due to how MSFS implements turbulence as the PMDG 777 has behaved for me in a similar way. Landing into Liverpool yesterday at the edge of the crosswind limit was fun but extremely challenging. It is certainly one of the better aircraft to hand fly, the feel is one of the best I've had in MSFS. Agree with everything you say, issues to be addressed but the feel flying this aircraft is awesome and the best 737 I ever flew! Will be interesting to see if/how it can be even better in MSFS2024.
October 21, 20241 yr 23 hours ago, Dreamflight767 said: I've only done 1 flight so far but the pause at TOD didn't work. Anybody having issues? Thanks. Works for me and I've flown several flights. Causes me to wonder why PMDG has made excuses for not being able to do this. I like iFly's using one of the flight displays to indicate it is paused. Make sure when you choose the option in the EFB to set it by clicking the bottom button. Edited October 21, 20241 yr by lenny777 Ryzen 7 5800x, 64gb, 7900XTX 24gb
October 21, 20241 yr 42 minutes ago, lenny777 said: Works for me and I've flown several flights. Causes me to wonder why PMDG has made excuses for not being able to do this. I like iFly's using one of the flight displays to indicate it is paused. Make sure when you choose the option in the EFB to set it by clicking the bottom button. Thanks. I might be doing something wrong but I'm still having trouble. I'm pretty sure I'm following the correct steps to set it. The airplane ran out fuel and crashed today. I have my pause at TOD set for 1nm before TOD. Can someone please change their value to something other then 10NM to see if this creates this problem. Thank you! A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
October 21, 20241 yr 8 minutes ago, Dreamflight767 said: Thanks. I might be doing something wrong but I'm still having trouble. I'm pretty sure I'm following the correct steps to set it. The airplane ran out fuel and crashed today. I have my pause at TOD set for 1nm before TOD. Can someone please change their value to something other then 10NM to see if this creates this problem. Thank you! I tried it successfully yesterday and had it set to 99 nm.
October 21, 20241 yr THIS IS NOT YET RELEASED - Will be tested before being released to everyone who has bought it. But this was posted on the Discord today of a fix list of an upcoming build. Quote Fix List for Next Build The following items (some listed as bugs) are intended to be in the next release candidate, however this list may change due to technical issues encountered during upcoming testing. PFD barber pole wrong texture MSFS mouse interaction style, some switches are not normal VSD drawing terrain out of bounds Corrected some colors of PFD/ND Added inhibit of joystick/yoke and throttles ND & MFD pages swap delay is not simulated, APU/GRD PWR gen TO ENG gen stutter is not simulated The FEEL DIFF PRESS Light On Too Long Oxygen test color invalid. It's Grey. Should be yellow When the start switch is put to GRD it takes about 2 to 3 seconds for the start valve open alert to illuminate but it comes on instantly in iFly High Speed Tape on PFD - Incorrect small dots, real ones are bigger . Reworked Inhibit Joystick/Yoke and Inhibit Throttle functional logic. Stall stick shaker has no animation LNAV Overshoot Engine spool rate adjusted. (within < 3% to real engine) Thank you Tim Long. Setting total PAX in EFB may cause some PAX values to exceed the maximum value Adjusted PAX station positions for enhanced CG% accuracy. Plugin tool adds the function of specifying MSFS installed package path Plugin close/exit and minimize to systray logic adjusted. New pop-up message added on closing. Corrected the flap limit text error on the landing gear panel, Corrected the cabin window visor texture error, Corrected the cockpit eyebrow window texture error, Corrected some cockpit wall texture errors, Corrected the door indicator panel light text error, Corrected the fuel panel light text error Optimized the model and texture effect of the MCP digital window Optimized the Overhead Panel textures, Optimized the texture effect of the external emergency evacuation lighting iFly Manager has a "Close Plugin" option if it did not gracefully shut down on its own. iFly Manager - changed the "Manage Order" button to "Manage Product" iFly Manager - other fixes to help during peak traffic periods. iFly Manager – no longer opens iFly Plugin after install (to avoid confusion and to get folks used to using it as designed). iFly Plugin – No longer minimizes to tray instead of closing. The next build will initially be going to beta testing to make sure there are no regressions. Once the development team gives the OK, it will be released via the iFly Manager. Keep in mind that the product is still pre-release software. Edited October 21, 20241 yr by Zangoose Vote to fix transparent sun visors having no effect on the sun glare effect in MSFS at: https://forums.flightsimulator.com/t/sun-shades-sun-visors-not-influencing-light-in-cockpit/691565/
October 21, 20241 yr 33 minutes ago, Zangoose said: THIS IS NOT YET RELEASED - Will be tested before being released to everyone who has bought it. But this was posted on the Discord today of a fix list of an upcoming build. I wish iFly add WX radar. Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
October 21, 20241 yr I am loving this plane so far. I do have a question though, and I apologize in advance for my ignorance. I almost always hand fly, and I noticed a chugging sound that is almost constant unless I am literally flying straight and level. Does anyone know what this sounds is? It sounds a bit like when you are messing with the trim. Cheers, Pete Pete Solov - Lake in the Hills 3CK and Schaumburg Regional 06CProud AOPA Member - PPL 2001Real World Piper Cherokee Pilot
Create an account or sign in to comment