June 27, 20187 yr 2 minutes ago, biloo said: Is it a seperate purchase ? I already have 2.61. Log in to your Sim Tweaks account and re-download. Eric i9-12900k, RTX 5070ti OC, 32GB ddr5 5600 RAM, 2TB 980 Pro SSD, Titan 240RX AIO, Samsung CRG90 49", Win 11
June 27, 20187 yr 3 minutes ago, biloo said: Is it a seperate purchase ? I already have 2.61. If you already have the version which supports Prepar3D V4, then I would assume, that it would be a free upgrade. Best regards,--Anders Bermann-- ____________________Scandinavian VAPilot-ID: SAS2471
June 27, 20187 yr 4 minutes ago, Flic1 said: Log in to your Sim Tweaks account and re-download. Thank you. Got my copy. Edited June 27, 20187 yr by biloo Bilal Asif Khan
June 27, 20187 yr Got it. If my All Months presets set will work with v4.3 I will put it in my thread at the PTA forum. Only FSPS Dynamic to go now... Update : My All Months preset set v13 is working great in v4.3 ( left monitor is a 40"... Middle and right are 32" ) Edited June 27, 20187 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
June 27, 20187 yr Reinstalling the OS made sense in the old days with magnetic drives but not so much anymore with ssd's and windows 10. Cheers bs AMD RYZEN 9 5900X 12 CORE CPU - ZOTAC RTX 3060Ti GPU - NZXT H510i ELITE CASE - EVO M.2 970 500GB DRIVE - 32GB XTREEM 4000 MEM - XPG GOLD 80+ 650 WATT PS - NZXT 280 HYBRID COOLER
June 27, 20187 yr For those doing the full removal of client, content, scenery then running each module and with orbx ftx global.. did you have to reinstall ftx global or just re-run ftx central and let it sit and wait and ftxg textures were put back? Asus Strix z790-e; 1000 watt evga SuperNova Plat; 14900k AC_LL 0.55 adp -0.050 253/253/355 CEPoff (CB-1pass 39200 80c, msfs peak 92,avg 60-78c, astrorender 95c,room76F); 64GB(dual 32) cl32 6400 at 6400 xmpII F5-6400J3239G32GX2-TZ5RK, Asus Ryuo III 360mm; Thermaltake v51 Case; Gigabyte 4090 OC; VR-Crystal; Dofreality H6; Astrosite
June 27, 20187 yr Howdy: Just to be ultra sure, I only need to up date client & contents correct. No need to do scenery? If I do reinstall scenery? What happens? Do I have to reinstall all my add ons? Thanks! A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
June 27, 20187 yr 23 minutes ago, Dreamflight767 said: I only need to up date client & contents correct. Client is required, content only if you actually want the content (which mainly is the new plane). If you don't care about that plane, you might as well skip the content. Scenery offers only very few new things and is hardly worth the trouble. Just read the release notes and see if content and scenery offer something you want or not.
June 28, 20187 yr 10 hours ago, theskyisthelimit said: For those doing the full removal of client, content, scenery then running each module and with orbx ftx global.. did you have to reinstall ftx global or just re-run ftx central and let it sit and wait and ftxg textures were put back? https://www.avsim.com/forums/topic/522254-ftx-orbx-scenery-prepar3d-updating-reinstalling-troubleshooting/ Cheers, Massimo Burti Intel Core i9-13900K ¦ 64GB DDR4-3200 - 2x 32GB - Kingston Fury Beast - black ¦ 2x 2TB - m.2 NVMe Gen4 - Samsung 980 Pro ¦ Asus ROG Strix Z690-A Gaming WiFi D4 ¦ Asus TUF RTX 3080 Gaming OC LHR - 12GB ¦ 1000W - 80+ Platinum - Seasonic Prime PX
June 28, 20187 yr 12 hours ago, theskyisthelimit said: For those doing the full removal of client, content, scenery then running each module and with orbx ftx global.. did you have to reinstall ftx global or just re-run ftx central and let it sit and wait and ftxg textures were put back? I have a variety of ORBX plus some Flytampa, Aerosoft and JustSim sceneries. After deleting the 4.2 client, content, scenery followed by install of 4.3 nothing was affected. I just re-ran FTX-Central to get its new version automatically installed. Michael Edited June 28, 20187 yr by michaelth Michael Thesen MSFS, HP Reverb G2, Gigabyte B760 32Gb, Samsung 970 EVO, Geforce RTX 4070-TI, Win11, i7-14700KF, Thrustmaster T16000M, Saitek Pro Flight Rudder Pedals
June 28, 20187 yr 16 hours ago, odourboy said: Which lights? The Dome light for example is on and I can turn the knob, so it switches off, but after half a second it switches itself on again, but the knob is still in "off" position. Otherwise: Really good performance now with Dynmic Lights. I like the update so far! Had to uninstall FSLabs A320, otherwise I got an error while starting P3D and did not see any window, just heard the RAAs screaming "On runway 18... Flaps! Flaps!" 😄
June 28, 20187 yr 56 minutes ago, michaelth said: I have a variety of ORBX plus some Flytampa, Aerosoft and JustSim sceneries. After deleting the 4.2 client, content, scenery followed by install of 4.3 nothing was affected. I just re-ran FTX-Central to get its new version automatically installed. Michael I had to re-run the ORBX migration tool to get back my ORBX landscapes, but after this everything went fine. Does anybody notice some shadow issues? After upgrading to 4.3 it seems to be a stronger flickering and crasser shadows while sparser shadow settings....
June 28, 20187 yr 57 minutes ago, swiesma said: The Dome light for example is on and I can turn the knob, so it switches off, but after half a second it switches itself on again, but the knob is still in "off" position. Otherwise: Really good performance now with Dynmic Lights. I like the update so far! Had to uninstall FSLabs A320, otherwise I got an error while starting P3D and did not see any window, just heard the RAAs screaming "On runway 18... Flaps! Flaps!" 😄 Check the overhead to see if the “STORM” light is switched on. Turn it off if it is. Jose A. Core Components: AMD Ryzen7 7700X - G.Skill FlareX 32 GB DDR5 6000 CL36 (XMP) - Gigabyte B650M Aorus Elite AX - Asus ROG Strix RTX3060 12gb Storage: WD Black SN750 NVMe 1TB - AData sx8200 Pro NVMe 1TB - Samsung 860 EVO 500GB - Samsung 870 EVO 1TB WIN11 - P3D v.5.3 HF2 - XPLANE 11 - MSFS
June 28, 20187 yr Commercial Member Hi All! dear user of EZCA. Version 2.7.0.10 This version is adapted for Prepar3D V4.3 and passed a short beta test that will still remain in the "BETA" stage for about 1 week. In this version, full compatibility with the new simulator, but we leave a certain percentage of the probability for bugs and issues. You can leave your feedback about the work of this assembly in a new thread: https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383441.html#383441 I also want to note that in this version we completely changed the protector and the protection mechanism. How will the EZCA working in protection cause we can not tell because of security. Either way, legitimate users will not have any problems with EZCA behavior in this assembly. Download update to 2.7.0.10.... Nick Bebyakin / Handmade cameraset - Ezdok v2 and Ezdok v3 EZdok Software. Support remains on the http://www.ezdok-camera.com/ [email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020
Archived
This topic is now archived and is closed to further replies.