July 22, 20232 yr Anyone had any luck configuring the Honeycomb Bravo to run the Master Battery? I can't get the switch to work - if I try Master Battery On/Off (separate inputs), nothing happens in the plane. Master Battery Toggle works - but the switch constantly flicks up and down. 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
July 22, 20232 yr 23 minutes ago, JonathanC said: Anyone had any luck configuring the Honeycomb Bravo to run the Master Battery? I can't get the switch to work - if I try Master Battery On/Off (separate inputs), nothing happens in the plane. Master Battery Toggle works - but the switch constantly flicks up and down. My Bravo just worked without any configuration at all 😮 CPU Ryzen 7800X 3D RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090 Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440 Internal Storage 1TB NVMe PCIe SSD External Storage Three 4Tb HDs
July 22, 20232 yr Just now, MrBitstFlyer said: My Bravo just worked without any configuration at all 😮 Most things worked on mine as well, but the switches don't match the physical layout so I wanted to change it. I got everything else working (Fuel Pump, Nav/Inst Lights, Landing Lights, Strobes, Rotating Beacon, Master Avionics).. but the battery just doesn't work. If your Master Battery is working with a switch, mind sharing a screenshot of your controls? Maybe I'm toggling the wrong thing. 9800X3d, 4090, 64 GB DDR5 6000 RAM, 4 TB NVME (2x2), 4K Ultra + Framegen
July 23, 20232 yr Getting old.... 🥴 How do you folks get the green instrument panel? - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
July 23, 20232 yr 37 minutes ago, David Roch said: Getting old.... 🥴 How do you folks get the green instrument panel? Change livery to N6229P. CPU Ryzen 7800X 3D RAM 32GB Corsair VENGEANCE DDR5 6000MHz GPU GEFORCE RTX 4090 Monitor AOC AGON AG352UCG UltraWide G-Sync @ 3440x1440 Internal Storage 1TB NVMe PCIe SSD External Storage Three 4Tb HDs
July 23, 20232 yr Thank you! 🍻 - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
July 23, 20232 yr Is there a way to hide the pilot model? Mainly for screenshot purposes after parking up and putting the tie downs on etc. Vote to fix transparent sun visors having no effect on the sun glare effect in MSFS at: https://forums.flightsimulator.com/t/sun-shades-sun-visors-not-influencing-light-in-cockpit/691565/
July 23, 20232 yr 7 minutes ago, Zangoose said: Is there a way to hide the pilot model? Mainly for screenshot purposes after parking up and putting the tie downs on etc. You have to click the door handle and then, BEFORE the door closes, click on the clickspot on the wing upper surface to exit the airplane.
July 23, 20232 yr On 7/21/2023 at 4:59 PM, AviatorMan said: Thanks. My throttle problem is related to my controller setup evidently, because when I use the mouse and advance/retract the actual throttle in the a/c it works as it should. I will take your suggestion concerning the bindings. Have tried several times and failed to fix the problem.Have checked on the A2A forum as well and no mention of the problem there. I am surprised that very few other users seem to have had this problem. This issue is not present in my other aircraft. Guess I will have to go back to flying the Black Square Bonanza until A2A sends out an update that fixes the problem. Disappointed... My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
July 23, 20232 yr 2 hours ago, Zangoose said: Is there a way to hide the pilot model? From the manual FAQ: How do I remove the pilot from the plane? Open the cabin door and click the black non-slip walkway on the wing. But I can’t open the door! It’s a two-part process: first unlock the latch at the top of the door by rotating it forward, and then use the handle below the window. Bear in mind that if the engine is running, the prop wash will push the door closed.
July 23, 20232 yr 24 minutes ago, AviatorMan said: Have tried several times and failed to fix the problem.Have checked on the A2A forum as well and no mention of the problem there. I am surprised that very few other users seem to have had this problem. This issue is not present in my other aircraft. Guess I will have to go back to flying the Black Square Bonanza until A2A sends out an update that fixes the problem. Disappointed... What exact throttle controller are you using, and how have you programmed it?
July 23, 20232 yr 18 hours ago, Bobsk8 said: Why bother, it is easy to use, and you can move it around anywhere in the aircraft. I know but as I have a complete home cockpit I am trying to not use mouse as much as I can, that why it would be great to have the tablet on my ipad
July 23, 20232 yr 2 hours ago, Bobsk8 said: What exact throttle controller are you using, and how have you programmed it? Saitek (i.e. Logitek) yoke w/ 3 lever quadrant programmed to Throttle 1 &2 and Prop 1 Saitek 3 lverThrottle quadrant programmed to Prop 2 and Mixture 1 & 2 Have programmed these controllers using the Controls Section in MSFS 2020. My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
July 23, 20232 yr What a great plane, after a weekend reading through this thread I could not resist anymore! Don't regret buying this at all, it has indeed a great feel when flying it. Edited July 23, 20232 yr by rob0203
July 23, 20232 yr 1 hour ago, rob0203 said: What a great plane, after a weekend reading through this thread I could not resist anymore! Don't regret buying this at all, it has indeed a great feel when flying it. I am only on my third flight, but you certainly appreciate all of the small details. I started mine as a new airplane, and am doing everything possible to fly it by the check lists, and great prudence as well. My last landing at KBMI was so smooth, that I simply can’t wait to go back. It really makes me want to learn more about the plane, which I am doing now. It will be difficult going back to any of my other planes. This was a long time in the making, but my utmost appreciation and respect for what the A2A team did here, as they exceeded any expectation I had for this project. I9-13900kf - rtx4090 32gb ddr5 4800mhz, 2TB M.2 PCIe NVMe SSD internet - 300+ mbs / Honycomb Alpha yoke / Saitek Throttle Dell 43” 4K
Create an account or sign in to comment