All Activity

This stream auto-updates     

  1. Past hour
  2. georgiosgiannoukos

    P3D4.5 FXAA or AA

    Hi, please someone to help me. If I’m using AA 4xMSAA with Vsync and Trible Buffering ON Unlimited FPS Iget stutters and flickering to objects and so on. Now I’m using FXAA with 4xSSAA Vsync and TB off unlimited FPS. Tv 49” 4K 60Mhz My specs 4700k 4.2Ghz 32GB ram GTX1080ti Whats the best to use because I’m lost in settings Geo
  3. Alan_A

    GTN 650/750

    I've never changed the F1 GTN CONFIG settings from default, so in my setup the autopilot is set to NAV. What steps are you taking before the aircraft turns to 360? And what are you trying to get it to do? I'm going to venture a guess that you want it to track a radial to a VOR. If that's the case, there's an additional step - you have to set the VOR receiver to the radial you want to track, using the knob on the OBS gauge on the instrument panel. If so, here are the steps you'd take, in order: 1) set the GTN 650 to VLOC (by pressing the CDI button on the default nav page; 2) set the NAV 1 radio on the GTN 650 to the correct VOR frequency, and 3) set the radial you want to track on the OBS gauge - it turns the compass card on the gauge. If the autopilot is already engaged and set to Localizer, and if you're relatively close to the radial, the autopilot will intercept it and track it. If you're far away from the radial, you'll need to navigate toward it at a relatively shallow intercept angle - you can fly by hand, or set the autopilot to Gyropilot and set your course with the steering knob. Of course, if the autopilot isn't engaged, none of this will happen - you'll need to turn it on using the steps I outlined above. Hope this is helpful - let us know - and also let us know if you're trying to do something different than what I outlined here. Whatever it is, I'm sure we can figure it out.
  4. https://de.scribd.com/doc/86840836/FCOM-ATR42-500
  5. Anders Bermann

    GSX update on the way

    Is there? I would assume, that one way of doing it, could be to specify a custom exit point in the GSX Editor for each parking stand - similar to how you setup and tweak your SODE jetway. I'd assume it would be possible, but since I don't know anything about the coding or setup, I don't know if it can be done or how difficult it would be to do.
  6. pegruder

    Native P3D v4.5 Vr - 'Wobbly' looking image?

    Gotcha - I had a feeling it was related to frame rate. So weird because in the headset it "felt" smoother than fly inside which seemed to be just a jittery mess. The only anomaly was the image quality. Ill have to play with some settings and report back.
  7. w6kd

    Restarted my PC, and now my FPS is lower

    A cold boot might be worth a try in such an event--that's completely depowering the PC by first shutting down normally and then either turning the switch off at the power supply (if it has one) or unplugging from the AC supply and leaving it off for ~30 sec or so so that everything in the computer is fully de-energized. I've had GPUs (and USB devices as well) go wonky on me with issues that persisted through multiple warm boots (i.e. Windows restarts), and a complete power down did the trick. When you restart or shut down your PC in Windows, parts of the computer still remain powered. Although the devices should fully reset when warm booting, sometimes it doesn't work that way. Regards
  8. Boeing or not going

    Volumetric fog and ASP4/ASCA

    The visibility setting inside ASP4 has a long description of what slider to set. 199 miles vis gives you volumetric fog, 200 is a single layer to help low fps.
  9. jabloomf1230

    OLE error 80045017=Voices cease in VOX-ATC

    Unfortunately, VOXATC official support presently only benefits the developer, as he fixes things based on those emails. So don't expect a response. You didn't mention which sim, so I'm assuming it's P3d4. Just as an aside here. I've never had any problems with CereProc voices, but if you use the AVSim search function you will find threads about issues with CereProc voices and other speech synthesis add-ons. You might better off adding the built-in Win 10 voices. There's a registry hack to get a bunch of them that are hidden by default to show up.
  10. Bert Pieke

    P3D multicore usage anomoly

    Suggest you read through this (rather lengthy) discussion for things to try..
  11. Today
  12. Wanthuyr Filho

    P3D multicore usage anomoly

    Interesting! Does it need to be running background for the limiter to work? The 64-bit options within the Settings need to be checked, considering P3D is 64-bit nowadays?
  13. Afterburner

    Volumetric fog and ASP4/ASCA

    To my knowledge, Active Sky determines the altitude of the fog layer automatically based on weather conditions. Whether that altitude is realistic or not is a different question, and in my opinion, there is room for improvement. Personally, I use a value of 25 miles for maximum surface visibility and 200 miles for maximum upper visibility. I also use Envshade. Maybe you could post some screenshots to let us see the problem.
  14. Dreamflight767

    CS757 III Req

    Update: -ATI - Air Transport International (8C/ATN) -Asia Pacific Airlines (P9/MGE) B753: -ATA - American Trans Air (TZ/ATA)
  15. Dreamflight767

    PMDG 77F Aloha Cargo

    Fingers Crossed.
  16. Well, there's LockLizard, for the low, low price of $4995. No, I didn't forget the decimal point. The best (and probably only) real countermeasure is to not put your material in the hands of someone who is likely to misuse it.
  17. Looks like the new Yoko+ yoke came out a couple weeks ago... any Avsimmers have one and care to comment?
  18. This video is a VFR P3D4 flight of a simulated Eurocopter. The flight departs from Gatwick airport, (EKGG), and arrives at London City Airport, (EGLC), in England,Great Britian. I am retired and a hobby flight simulator enthusiast user name Polymerman. I would be pleased for viewers to subscribe to my OVER YOUR HEAD PRODUCTIONS channel for new releases at https://www.youtube.com/channel/UCu_zeEUvH6_33EI0tuBTfRw. This is a non-commercial hobby YouTube channel. This channel enables me to have a year round fun hobby and share it with others of similar interests. The following credits are from my elder memory so please forgive me if I leave some out. Please post a comment and I’ll try and update this area if possible: P3D4, Lockheed Martin, Orbx Simulation Systems sceneries including True Earth Great Britain South, Internal Workings VOX-ATC, HiFi Active Sky for P3D4, and Active Sky Cloud Art, EZDOK EZCA V3. A special thank you goes to: 1. John Martin aka downunda “vadriver" for the recommendation of the VOX-ATC app. 2. Alexander Barthel for his Little Navmap (https://www.littlenavmap.org), a free open source flight planner, navigation tool, moving map, airport search and airport information system for Flight Simulator X, Prepar3D and X-Plane. 3. Open Broadcaster Software (OBS), a free and open source software for video recording and live streaming. Download and start streaming quickly and easily on Windows, Mac or Linux.(https://obsproject.com/)
  19. Comes right up under Key Assignments when searching for 'Shader' with me
  20. These QUICK LOOK videos are very short videos made using P3D4 flight simulator. This one looks at the newer version (1.10) of Bilbao Airport LEBB by ORBX Simulation Systems.
  21. Benjamin J

    Restarted my PC, and now my FPS is lower

    Is it possible that when you restarted something happened with your graphics driver? Your got going to max load suggests that your bad FPS stems from a massive bottle neck from your gpu, but if the hardware wasn’t changed, the only thing that could have happened was some sort of driver update, reversion or something of the kind. You might want to check your driver is up to date, or at least that it’s still the driver you had installed before you restarted your computer.
  22. qwertytam

    YMML Jetways In the Air

    Thank you!! Worked perfectly
  23. w6kd

    Volumetric fog and ASP4/ASCA

    Have you tried asking over at the HiFi support forum?
  24. Polymerman

    OLE error 80045017=Voices cease in VOX-ATC

    John and Jay, Thanks for you input. I am using VoxAtc 7.42 and I do have a CereProc voice as the MS default voice. I submited a request to VoxAtc but no reply as of yet. Are they "off the air" so to speak? Interesting side note: my brothers and sister went to Manuel High School in Brooklyn that was renamed John Jay High because of the terrible reputation it gained. You guys have a great reputation!😀
  25. MNORM

    OZx Libraries

    The black buildings are primarily hangers at the airports...not sure if that helps.
  26. airernie

    FEELTHERE ERJ 145 V2

    Not sure if they have the same one, but there are several in the AVSIM library. You can also find some on the FeelThere downloads page, but you'll probably have to log in first.
  1. Load more activity