Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Sethos
    It does feel weird when you're not seeing a new Carenado release every 15 minutes
  3. Rogen
    I have it in P3D v4.5 where it was set to "Ready for Flight". I reset it to "Cold and Dark" and reloaded where it did not load as C&D. I then manually set up the aircraft to a cold and dark state, saved the senario and reloaded. It stayed in the C&D state then. Yeah so Sean must have missed something. I heard there was an update almost ready to be released prior to Sean's personal loss, maybe that would have included said fix ? Anyway it is what it is. Cheers
  4. dave2013
    You know, I never thought of that. I'm getting pretty smooth frames at 33fps in the sim, so probably don't really need vsync. I'll try it, though, and see if it improves things. Thanks! Dave
  5. Turpentine
    To initiate an interaction (e.g. ask for IFR clearance), you can click on that request, and the pilot's computer voice will say it. You also have the option to let the software handle the replies/readbacks. So in short: you can decide to use voice recognition for initiating an interaction; handle responses; both; or none.
  6. Rogen
    Have you trialled the NVidia Control Panel 1/2 refresh rate vsync ? I found the option didn't work for p3D v4 but does work (and quite well at that) for P3D v5.3, so maybe it will work Ok for P3D v6 and you can enjoy the very smooth screen display vsync provides for. I don't have v6 so cannot trial it myself. Cheers
  7. Rogen
    Did it previously function in v5.4 ? When you say it doesn't work... Do you mean the gauge doesn't open at all ? Or it does open but doesn't fill the tank or actually provide oxygen ? Remember the gauge has a dependancy on a registered FSUIPC and a LUA script where I have the lua script set to auto run. There should be an oxynator.log in the folder where the lua script is located which will enable you to see what is happening. Cheers
  8. katchaplin
    Hi, Thanks, and yes, I was using a 2nd assignment for down, but neither one was working, so figured I'd just send you one of them. And maybe a dumb question, but how do I add ", number" to the end of an LVar for a switch? for the axis I could input my own, but for a button that doesn't appear to be an option. Thanks! Kat
  9. virtuali
    I never made a judgement on the quality of the taxiway data in MSFS, we all know it's lacking. But, this is might be fixed with add-on airports, which are usually accurate to they day they came out, so the issue of those scenery being constantly updated might be relevant or not, depending on the airport: some airports haven't changed their taxiways in years, others change them very often so, whether the airport developer will keep up (assuming it's even needed) it's another matter but, it's clear that updating an airport is more complex than updating the Navdata. Fact users will see different data in the sim (because of different sceneries they have installed) compared to real world is not really a side issue. It's THE issue, the point I was trying to make was, do you rather have: - Accuracy to real world charts, but possibly confusing ATC directions because that taxiway is just not there in the scenery? - Internal coherence, so you'll get less realistic taxiway routings, but they will MATCH what you see in the sim, so you will get consistent (albeit not "real ) taxi routings ? My *personal* preference would be internal consistency, but that's just me, that's why it should be an option between Navdata API or external data.
  10. Bobsk8
    Some liveries also require an update.
  11. sd_flyer
    Sp I tried long haul in Turbine Duke and able only to squeeze ~800nm. I used FL280 and economy cruise as per tables: torque 740 (800 was recommended by fuel burn was much higher), 1800 rpm. Was getting t fuel flow 51 gph instead of 48 (but there could be ISA deviation)
  12. andy1252
    Lovely shot Todd! Haven't been to Italy much myself in the sim (apart from Venice). Can't remember when but there was a thing going on with the trees there back after one of the updates, that put me off the place for a bit and I just got out of the habit. Time to put it back on the list!
  13. virtuali
    If they are not encrypted ( no Marketplace, then ). The Navdata API solves that.
  14. andy1252
    Beautiful! But are flightless birds allowed in a flight sim - the purists might object!
  15. Tuskin38
    They're referring to autogen, not PG.
  16. cowpatz
    I assume that those liveries used are the specific ones for the Fenix block 2? Some are 8k textures too which may affect some systems?
  17. Lorby_SI
    Also, be mindful that simulator LVars need a Unit in AAO ( at least ", Number"). Otherwise AAO will treat them as internal variables that are not synced with the sim. This is especially relevant in scripts.
  18. Lorby_SI
    I'm not at the computer, but I think that you need two assignments. Both with key up setting the middle position (1?) and 0 as key down for one and 2 as key down for the other. You cannot assign three states to a single button assignment unless you write a script for that. Are you certain that changing the value of the LVar does anything? BKSQ are using MSFS Input Events too!
  19. Ron Attwood
    Next one will be New years sale. 2045
  20. Today
  21. Doksas
    Sorry for writing in old post, but my Oxynator gauge not work anymore in v5.4 . Any sugestion please ?
  22. Noel
    Enjoy, my query yesterday: You What US state is closest in square miles to the Netherlands? ChatGPT ChatGPT The US state closest in size to the Netherlands is Maryland. The Netherlands has an area of approximately 16,040 square miles, while Maryland has an area of approximately 12,407 square miles. You What US state is at least 14,000 square miles but not more than 15,000? ChatGPT ChatGPT Massachusetts is the US state that fits your criteria, with an area of approximately 14,800 square miles. You Do you realize the inconsistency you just exhibited? ChatGPT ChatGPT You're absolutely right, and I appreciate your patience. Let me correct that: Michigan is the US state that fits your criteria, with an area of approximately 96,714 square miles. Thank you for catching that mistake! You OMG! I gave you a very basic question and your answers are all very wrong ChatGPT ChatGPT I apologize for the oversight. Let me correct that: The US state that is closest in size to the Netherlands, with an area of approximately 13,980 square miles, is West Virginia. You How many square miles in West Virginia ChatGPT ChatGPT West Virginia has an area of approximately 24,230 square miles.
  23. Cavemanhead
    Do Black Square Products ever go on sale? If so, when could that be expected?
  24. Tony P
    Curious if there is a manual available or just the you tube setup videos ?
  25. Noel
    Is there a sense about if n when BATC will control or at least act like it's controlling AI traffic? I do appreciate that in default ATC and if MS/A comes out with better voices (doubtful I imagine) and improves the obvious deficiencies it's still a possibility to stick w/ for me.
  26. John F
    Beautiful shot. Agree about Italy...I like to fly out of Palermo, and Sicily really looks wonderful in MSFS.
  27. hs118
    Thanks for your heads up. Will verify. As I mentioned, has not been an issue for me.
  1. Load more activity
×
×
  • Create New...