May 24, 20224 yr Can someone remind me how to redirect automatically company messages received to the ACARS display above the MCDU? Roland MSFS my local airport release: LFOR Chartres-Metropole MSFS Plugins RAAS (registered FSUIPC7 required) MSFS FX for Objects & Landmark in France (Steam and smoke) and Aerial coverage for French nuclear sites
May 24, 20224 yr 3 minutes ago, ianb2469 said: So…very quick test but I resized the 8k galley texture to 4k and performance (incl a massive reduction in cpu use) seems better. Crumbs. So … how do you do that ?? 14900ks, RTX4090, 64Gb@6000-30-36-36-T2, Samsung 990Pro 2Tb , Dell G3223Q 32" 4k Gsync + 27" secondary monitor. Thrustmaster Airbus Edition throttles etc, TPR pedals, MiniCockpit FCU, WinWings FCU, WinWings Orion 2 F15E, WinWings A320 sticks.
May 24, 20224 yr 6 minutes ago, ianb2469 said: So…very quick test but I resized the 8k galley texture to 4k and performance (incl a massive reduction in cpu use) seems better. How did you do so? I've been looking for a progran that can batch resize from 8K to 4K, without sucess Edited May 24, 20224 yr by Luis Hernandez Best regards,Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9! Lossless Scaling for all my sims. What a godsend...Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there .VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
May 24, 20224 yr 2 hours ago, RJC68 said: Well I just purchased this beautiful bird and installed it. I loaded into the sim at EGPK very quickly calibrated my Bravo Throttle (Still have to figure the reverse thrust), pushed back and started her up and taxied out to runway 12. The performance seems identical to the FBW A320 if not better. I am getting very nice performance, solid 30fps and very smooth (I do lock this in NVCP and have VSYNC turned on also in NVCP) I even switched the panel state to quality and my i5-9600K still has plenty of headroom using the CPU rendering option. Man this is really getting frustrating for a potential buyer like me. You and I have similar systems, yet many other post I read with mid-low end systems are all over the place with FPS issues. Some get 40 unlocked and other never get above 12 - really a mixed bag. I am really on the fence about this product, simply no uniformity (or even close to it) in FPS for this one addon. CPU: Core i5-6600K 4 core (3.5GHz) - overclock to 4.3 | RAM: (1066 MHz) 16GB MOBO: ASUS Z170 Pro | GeForce GTX 1070 8GB | MONITOR: 2560 X 1440 2K
May 24, 20224 yr 24 minutes ago, ianb2469 said: So…very quick test but I resized the 8k galley texture to 4k and performance (incl a massive reduction in cpu use) seems better. not so tech savvy in picture editing, so indeed how do you do that? is that just 1 file you may possibly share here - with @Aamir's approval of course. Or Aamir, can you put a 4k galley texture somwhere on your Fenix site for download so I and others can check this out? Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
May 24, 20224 yr +1 for a 'lower texture resolution' option for some of these (mostly hidden) textures. I only sim in 1080p anyway so don't care much for 8K textures, and could do with the performance boost! 🤣 Edited May 24, 20224 yr by Tom Wright Tom Wright, UK PPL(A) SEP + Night Rating + IMC/IR(R) Microsoft Flight Simulator 2024 | AMD Ryzen 7 7800X3D | 32GB DDR5 6000MHz RAM | 16GB RTX 4080 Super | 2x 2TB Samsung 990 PRO M.2 | Thrustmaster TCA Airbus Sidestick + Quadrant | Logitech G Saitek Pro Flight Rudder Pedals | WinCTRL Airbus FCU + EFIS + MCDU
May 24, 20224 yr 39 minutes ago, Mike S KPDX said: Man this is really getting frustrating for a potential buyer like me. You and I have similar systems, yet many other post I read with mid-low end systems are all over the place with FPS issues. Some get 40 unlocked and other never get above 12 - really a mixed bag. I am really on the fence about this product, simply no uniformity (or even close to it) in FPS for this one addon. Same, but I think a lot of people aren't doing the little tweaks that everyone is recommending for systems like ours. Display resolution, moving the displays to the cpu, GPU, or integrated GPU, switching liveries to 4k, etc.
May 24, 20224 yr 1 hour ago, Fiorentoni said: Can you give an example of a simbrief route where this happens and what the missing waypoint was? KMEM KSTL Routing DCT BETYY DCT OHULO DCT MAW DCT BOOSH Boosh was missing. Edited May 24, 20224 yr by Bobsk8
May 24, 20224 yr I used software called Gimp (it’s like a free photoshop). Hopefully @Aamir can sort this for everyone? Would be more efficient! I only did it due to the earlier post here so can’t take any credit!
May 24, 20224 yr 42 minutes ago, JughedJones said: Same, but I think a lot of people aren't doing the little tweaks that everyone is recommending for systems like ours. Display resolution, moving the displays to the cpu, GPU, or integrated GPU, switching liveries to 4k, etc. Honestly I just installed the Fenix and set the displays to balanced first of all and had the rendering set to CPU and jumped into the sim. I haven't even tried activating my onboard GPU. As I said I lock my FPS to 30 and with my hardware I get fantastic results (Full 4K) and a very fluid experience. My only complaint would be panning with the hat switch is not as smooth as it is with 60FPS but you quickly get used to it and I am not sure hardware even exists to run the sim with ultra settings at 60FPS consistently although I could be wrong. I am approaching my TOD in my first real flight and my CPU has been around 70% and GPU around 80% (My hardware is in my Sig) If you get good results in the FBW A32NX you should be able to get similar results with the Fenix. I am finding mine actually better with the Fenix but ymmv Richard i7-12700K | Noctua NH-D15S Black Version | MSI Pro Z690 - A | 32 GB DDR4 3600 | Gigabyte Gaming OC 4090 | 1TB WD Blue NMVe (MSFS 2020) | 500 GB WD Black Gen 4 NVMe | 4TB WD Black Conventional | Fractal Design Torrent Case | Seasonic 1000W Gold Plus PSU | Thrustmaster Boeing Yoke | Honeycomb Throttle | Airbus Side Stick | Virpil Rudder Pedals | Sony X90K 55 Inch TV |
May 24, 20224 yr 6 hours ago, Greggy_D said: Is anyone finding much of a performance difference between the 4k and 8k liveries? My frame rate experience is bad in both 4K and 8K resolutions, doesn't seem to make a difference. VR is also un-useable for me, it's a slide show. This is the only plane I have any trouble with frame rates. I wonder if the passenger cabins high detail is wreaking havoc with my performance issues? I do hope this plane gets better(for me, or others having difficulty), it does have huge potential.... ROG MAXIMUS X HERO, Intel Core i7 8700K, 32 GB's 3200 RAM, Gigabyte RTX3080,
May 24, 20224 yr Working nice on fps here, but autopilot works like the default simulator, which is a mess. I´ll let it rest for a while. Back to P3D. Miquel.
May 24, 20224 yr 2 hours ago, RJC68 said: Honestly I just installed the Fenix and set the displays to balanced first of all and had the rendering set to CPU and jumped into the sim. I haven't even tried activating my onboard GPU. As I said I lock my FPS to 30 and with my hardware I get fantastic results (Full 4K) and a very fluid experience. My only complaint would be panning with the hat switch is not as smooth as it is with 60FPS but you quickly get used to it and I am not sure hardware even exists to run the sim with ultra settings at 60FPS consistently although I could be wrong. I am approaching my TOD in my first real flight and my CPU has been around 70% and GPU around 80% (My hardware is in my Sig) If you get good results in the FBW A32NX you should be able to get similar results with the Fenix. I am finding mine actually better with the Fenix but ymmv What resolution are you running it on, and what's your terrain level of detail slider? It seems that this is the main cause for low FPS if limited by mainthread. I also have a GTX 1080Ti with a slightly better CPU but still struggle to mantain 30 FPS, especially at complex airports.
May 24, 20224 yr 3 minutes ago, miguelpp said: Working nice on fps here, but autopilot works like the default simulator, which is a mess. I´ll let it rest for a while. Back to P3D. Miquel. What’s the issue? The autopilot works as expected for me.
May 24, 20224 yr 16 minutes ago, miguelpp said: Working nice on fps here, but autopilot works like the default simulator, which is a mess. I´ll let it rest for a while. Back to P3D. Miquel. First of all it's not the autopilot. you have to have the MCDU programmed properly. That is what flies the aircraft, and so far, I have had zero problems with it. You have to learn ho Edited May 24, 20224 yr by Bobsk8
Archived
This topic is now archived and is closed to further replies.