Search the Community
Showing results for tags 'enb'.
-
Hi all, I'm excited with Shade FSX. Now FSX is closer to reality, as you can see in this vid. I will not use ENB Series anymore, so I got a few fps and smooth. I hope you'll enjoy with this short vid! Cheers!
-
マイenbseries：後に出版 他のスクリーンショット：後に出版 太陽のMOD：http://library.avsim.net/search.php?SearchTerm=sun+mod&CatID=root&Go=%E6%A4%9C%E7%B4%A2 http://forum.avsim.net/videos/view-348-fsx-sunrise-realism-graphics-hd/ -
My enbseries:Later published Other screen shot：Later published Sun mod :http://library.avsim.net/search.php?SearchTerm=Simple+Sun+Mod&CatID=root&Go=
-
Hi guys, I just recently added my third ENB series into FSX and I am still having the same issue. When I turn on the ENB series, it is too bright. The edges of the screen has a bright fade around it. It is a 24 hour enb series which I was given by a youtuber. Any help would be greatly appreaciated. Thanks, Josh.
-
Hey guys, I have just re-installed Windows and FSX with PMDG 737 NGX and 777 and tried installing my add-ons which consists of 1. EZCA EZDok camera 2. REX 4 Direct Texture 3. ENB series 24hr v 1.1 (uninstalled it) 4. Active Sky Next (uninstalled it) 5. Radar Contact 4.3 (unistalled it) I reinstalled win7 and fsx because I had issues like: 1. Cannot TOGA 2. My Plane tends to go of course (even on clear skies settings) when using active sky+REX 4DT Fixes: 1. For TOGA: If you had copy pasted ENB series in your MSFS folder, delete the enb.cfg file, (which will make another .cfg file) or delete the whole enb files and you should be able to TOGA again... enb won't be on again, but my plane over bloom effects, anyday! (I think this has something to do with its key mapping in the .ini file) 2. Haven't figured this one yet, but all i had to do to get back on course is to pause and unpause the sim I hope this can help some of you guys that have issues Iike I did... Now, I'm going to install Radar Contact 4.3 with its fsuipc and test it again (the version that comes with it, and the 4.9/latest version) and see whether the TOGA problems re appears... Update: used the REX 4 DT with FSX real world weather (static), and it made me off course, gonna try revert and see what happens... if it still happens, gonna set turbulenceScale=0 in the cfg or it might be hardware issues? I have already set NEVER to sleep mode in the OS.. Possibilities : 1. FSX real weather is not PMDG 777 "friendly? (reading from other posts) 2. hardware issues? if so, I managed to do the take-off-compressed time x8-landing in the tutorial (VRMM-OMDB) on clear skies
-
Hi, Anyone here running the following and not encountering OOM (VAS) ? PMDG 777 with ENB and Directx9 uk2000 (EGLL, EGKK, EGSS, EGPH etc.) aerosoft (EIDW, EDDF) I know, I know switch to directx 10 and Steve Fx etc...Yes, I know. But the truth is, I like ENB better and I have a high end system. So if you are in my situation and you are happy with FSX and no OOM....Then please help me. Thanks Regis
-
Hi, I fly FSX with ENB Series as the colours are better. I also have ezdok installed but never used it as I didn't know how to work it correctly. But now I have watched some youtube tutorials and downloaded the AOA camera pack. It works great but in full screen if I switch view the screen flashes black for like half a second. It is really annoying, By some research I found out it was ENB and it doesn't happen in windowed mode. I also get flashing during the initilization faze but I ignore that. I found these 2 threads from a few years ago which discuss it but there is never a fix found. These were from 2011/2012, it is now 2014. Do people use something different to ENB? Or is there a fix I don't know about? Previous Threads found from a google search: http://forum.avsim.net/topic/342844-ngxezdokenb-series-conflict/ http://forum.avsim.net/topic/383641-pmdg-ngx-ezdok-enb-flashing-issue-solved/ Thanks.
-
I MADE TWO SAME TOPICS. NOT ON PORPOSE. PLEASE DELETE ONE IF NECESSARY. Hi guys. i've got a problem. I have asus laptop with two graphic cards. one ###### intel and nvidia geforce, which is ok for fsx, but when i install sweetfx or any enb, fsx stop reading the nvidia one and may only run on the ###### intel. It happens wih every enb. I'm begging for help!
-
here is a guide i posted on the REX forums to get a little bit more beauty out of your prepar3dv2. My setting are very subtle but you guys can play with it. Now that prepar3d v2 is out, I thought it would be a good idea to put a guide for anybody that wants to enhance their prepar3d experience by adding a shader injection. In this case we will use sweet fx and flightfx GUI since regular enb doesnt work in dx11 and FXAA tool seems a bit buggy in prepar3d v2. This guide should also work for fsx dx9 and dx10 but will need setting adjustments. Right, so lets get to it. 1. download flightfx here : http://www.777studio...ightFX_V1.0.zip 2. donwload my settings if you choose to here : http://www.sendspace.com/file/ogxpi2 3. Install flightfx, I know this thing is supposed to be for ROF but it works just fine in prepar3dv2 and fsx. 4. Now before you launch anything, make sure flightfx and prepar3d are set to run in administrative mode. very important otherwise it will not copy the files that you need. 5. Launch flightfx (admin mode) 6.In the lower left corner of the program it says "register a new game" click it. 7. Find the prepar3d.exe file in the root folder here : C:\Program Files (x86)\Lockheed Martin\Prepar3D v2 8. Good, now the fields on the right should be already filled up. click on "Enable SweetFX" right below where it says "data folder". 8b. Check the root folder (C:\Program Files (x86)\Lockheed Martin\Prepar3D v2) to see if flightfx copied the necessary files. ex. d3d9.dll d3d9.fx dxgi.dll dxgi.fx etc. 9.Ok, now go to the "FX settings " tab on the top. at the bottom click where it says "Load from" 10.find where you saved the downloaded file that has my settings (file: "prepard3dv4.txt"). you can also put the txt file inside : C:\Program Files (x86)\FlightFX\FX\SweetFX\Presets for greater convenience. This should put the settings that i have done for preapr3d, you can change them as you want. i did mine with a bit more punch on the colors and bit more "clarity". 11. Now go back to the "Profile manager" tab and check that you have the right file under "FX Preset". this is the file that prepar3d will use for the settings that are active on the "FX settings" tab. 12. Great now leave flightfx open and launch prepar3d v2 and pick any scene that you want to test and adjust. 13. Now to use this we have by default 3 keys: - printscreen button does exactly that. -screenlock button turns the shaders on/off. -pause button reloads the shaders for changes (unmap from p3d if you want). 14.you can leave prepar3d running and just go to flightfx and change some of the settings. anything that you want. as soon as you move a slider it saves it automatically. so move a slider then just go back to prepar3d and hit the pause button.this will reload the shaders with your changes and you will see it immediately. here is a before and after for comparison. The settings are very conservative but like i said you can changed them as you want. before http://i.imgur.com/DJvDrp6.jpg after http://i.imgur.com/1XkEeuK.jpg Also note, my prepar3d setting have HDR off since its a bit buggy currently, and has FXAA off as well as no MSAA. flightfx deals with it better and its more adjustable. Thats it keep playing with it and help build amazing settings for the community. The thing seems very stable, although you might see that clicking menus seem a bit slow, you can turn off the shaders and it will go back to normal. Also i did not see any hit on FPS if anything maybe 1fps lost. Happy flying. -
Hi I have tried various versions of this , rex natural , vfr, 24hr. I think they all look very good, but a common problem I have is in daylight even in the summer sometimes the virtual cockpit goes so dark that I can't see any of the instruments, If I turn away from the sun they all light up again. Switching the panel lights on dosnt help. Anyone else get this effect, and any ideas how to fix.? I also have shade installed, its making me fly without enb, but night time flying seems too "bright" without enb. Nvidia 680gtx running on 3 monitors. Any comments appreciated. Happy Christmas all Steve
-
Hello everyone! I seached forum for similar topics but i didn't find the answer, so maybe somebody could help me. I bought a new computer this week and everything is running smooth. Today I realised, that I forgot to set up my ENB series so I copied everything to FSX folder as usual, but upon start my FSX just says "Fatal error occured" because of d3d9.dll. I have nVidia GeForce GTX 560 Ti with 301.42 drivers. W7 64bit. There was no problem with my old 4830 Any suggestions? Thank you.
-
http://www.youtube.com/watch?v=9Wl1zSVAVho -
Here are a few after reinstalling FSX. My first shots on avsim .
-
Hello guys, I'm presenting here a little addon I made for FSX. It's a set of sky textures designed to take advantadge of some ENB features. The sky textures were made in parallel with ENB settings -- that I included in the package -- to achieve the best visual result. You can use them without ENB, in a pure FSX, or while using something like SweetFX, but the results will be a bit different from the intended. Here are some screenshots, with and without ENB: With ENB Daytime At night (it will be darker than vanilla FSX, but lights will stay there) Sunrise Sunset Without ENB Sunrise Sunset Post-sunset Ok, I think this gives you an idea. You can download it here: http://library.avsim.net/esearch.php?CatID=fsxmisc&DLID=179660 That's all, hope you like it! Use this topic to discuss about this mod. This topic is replacing the one that was in the screenshots forum. Regards,
-
http://www.youtube.com/watch?v=hrL1H8vZt3Q
-
http://www.youtube.com/watch?v=1aVqrpDkC-o
-
http://www.youtube.com/watch?v=WtS0yIuq6xI
-
http://www.youtube.com/watch?v=zlAbh2Q9eVs
-
http://www.youtube.com/watch?v=sX8geeXJ6Rc
-
Flight Simulator FSX - Extreme Night Landing DX10 Ultra Graphics [HD] https://www.youtube.com/watch?v=0l-EMZiCcy0
